DekThaiG35

Inspirational project for sure, keep it up! -Nung Thailand

I digg it

That is what I'm thinking as well, insulation part might cost some serious $$$ I will talk to my builder and see whats up. But I kind of lean toward the ECO/Fans system style that you had mentioned, maybe it worth the research. Back to the drawing board Thx again!

Thank you so much guys, questions! 1) Should I install AC in my garage? I lived in Houston, Texas and during Summer, it is killer here. Anybody have AC garage? How was it? If AC is too expensive, which I think it is. I'm thinking about install bunch of fans for ventilation. 2) Should I do Epoxy Paint floor or Race Deck? This is the part I'm willing to spend a bit more money for eye candy. I also wanted to know how practical they were when it comes to cleaning the floor from oil/dust. Thanks again for all the inputs cheers! -v

Hey there, I'm in the process of building my house and I would love to fix up my garage so I can build my Z. Can someone please post picture of your garage for the inspiration. Do and Don't or Best Practice advices always welcome as well. Thanks again! -V

Totally enjoyed your post/work awesome mate!

So I was scooping Craigslist for new parts I found this.... http://houston.craigslist.org/cto/1443083037.html EPIC FAILED?

This dark red..hummmm...yumm..... Also this Gemballa Orange as well Hmmmmm yum@!

OH man, such a beautiful car

Interesting, What was very interesting was that I had the same idea as your but when I did my photo shop on the rear of my car it looked so bad ass but guest what...the scale was wrong. Now I see you put it on and they were quiet big...I'm not so sure anymore if I like it. 50/50 at the moment. I may have to look into other tail light.

ohhhhh Beautiful!! How hard to roll it side way?

Hello Grumpy I'm planning to put 2JZ engine in to my Datsun 240z, I only have a rolling chassis for the Z and the question was, what kind of wiring harness do I need to get my car running? Is this ok? http://stores.ez2wire.com/-strse-37773/AMC-Jeep-Chevy-Chevrolet/Detail.bok -Voravit

Got pic on the rear mount?

Thank you for creating this thread, since I had been looking into 300zx TT LSD, the CV shaft are so hard to find and very expensive if find one, so with these info, it will help me decide what to pick and maybe I should be ok with R200 300zx N/A as well. *Edited* What do you guys about what LSD I should get? I'm planning to put 2JZ TT to my car and will be around 460 HP, street car. thanks for the input.

interesting post, I'm sure once i got my engine stand I will have to go through the samething

It was nice weekend so I took my wife and kid to Dallas for little adventure. We drove from Houston to Dallas Aquarium and also visited Fossil Rim State wild life state park. Upon my returned from the trip...packages had arrived waiting for me!! Air Drill Air Chissel Air Sander Air Cutter Metal sheet Scale 200 pieces Auto Hand tools by Stanley (Snap On) SWEET!

Thanks for the info.! Just ordered 2 x 1000lbs engine stands for 109 dollars from harborfreight.com I can't believed they charged me 9 dollars for shipping, what a great deal!!

I love the colour, I had the same idea but after several hours of debating I have decided to go with red instead just for the fact that I don't want to attract too much attention to law enforcement

Thank you mate! After I read the forum that you had provided, I was able to secure some nice Engine Stands for about 50 dollars each on craiglist. Welding next!

How are you going to hoist? And where? I always open to new idea and safety and save $$$ Got pictures?

I did use chemical stripper and let me tell you....it is AWESOME. O Wearing a proper cloth and protection is very important Oh and just like previous poster stated that it hurts like a %^&&(# when the drop of chemical got your skin...well they ain't lying. Being from Thailand, I used to get bitten by one of this If you can't handle it, I dont recommended because I guaranteed, no matter how good your protective cloth that you are wearing, 1 drop gonna get into your skin...happened to me couple times and it's not pretty lol -Voravit

Got my quote what do you guys think? It seems like a good deal. Trm ****CASH**** Qtd 13Aug09 Qte Ref Frt WILL CALL Via 530U FOB Tel 000-000-0000 Fax 000 000-0000 Ctc ------------------------- Slp MICHAEL WESTERMEYER ================================================================================ Q U O T A T I O N QT No: HOU RS-363300 1 SQUARE TUBING A500 GR B 2 PCS 172 LBS 2 X 2 X .188 X 20' MATERIAL 2 PCS @ 59.6600 EA 119.32 -------------------------------------------------------------------------------- 2 SQUARE TUBING A500 GR B 1 PCS 112 LBS 2-1/2 X 2-1/2 X .188 X 20' MATERIAL 1 PCS @ 77.3800 EA 77.38 -------------------------------------------------------------------------------- 3 ANGLE A-36 1 PCS 23 LBS 1" X 1" X 3/16" X 20' MATERIAL 1 PCS @ 15.2400 EA 15.24 -------------------------------------------------------------------------------- 4 HOT ROLLED STRIP COMMERCIAL QUALITY 1 PCS 19 LBS 3/16 X 1 1/2 X 20' 20 FT MATERIAL 20 FT @ .5700 FT 11.40 -------------------------------------------------------------------------------- 5 HOT ROLLED STRIP COMMERCIAL QUALITY 1 PCS 19 LBS 3/16 X 1 1/2 X 20' MATERIAL 1 PCS @ 11.3100 EA 11.31 -------------------------------------------------------------------------------- 6 HOT ROLLED STRIP COMMERCIAL QUALITY 1 PCS 26 LBS 3/16 X 2 X 20' MATERIAL 1 PCS @ 16.3500 EA 16.35 -------------------------------------------------------------------------------- UNLESS OTHERWISE NOTED, ALL QUOTATIONS ARE GOOD FOR 7 DAYS. ALL MATERIALS ARE SUBJECT TO AVAILABILITY AND PRIOR SALE. Order Totals: 6 Items 371 LBS ******************************************************************************** Material Processing Freight Other Taxes ORDER AMT 251.00 20.67 271.67 ******************************************************************************** Taxes: TX1 15.69 TXHO 2.49 TXHOMT 2.49 0.00

Guys, Quick question, I had tried searches but can't seem to find an answer. Does headlight fender extension for S130 fits S30? Thanks a lot. I bought one from eBay (S130) to fit my S30 and the seller told me its the same thing, I just wanted to make sure. -Voravit *Edited* Never mind, it does not fit.

Thanks for the clarification. One question, I just noticed...how do I attach the rear mount? Through the hatch? or under the body? I don't see where I could attach bolt to the rotisserie from the rear. hummmmmmm... Edited* Ok found a picture from the member, how did he mounted like this? He drilled/weld on the bumper?

DON'T Buy this weaksauce paint strip...I thought it was the same...ITS NOT! BUY THIS I will take picture later on, the differences between two type is VERY noticeable...best combo to strip the paint is to use it with paint removal disc attached to air tools.