Jump to content
HybridZ

big-phil

Donating Members
 View Profile  See their activity

  • Posts

    1606

  • Joined

  • Last visited

  • Days Won

    12

 Content Type 

Everything posted by big-phil

  1. big-phil
    I'll take two!
  2. big-phil
    I'll have to remember not to go there.
  3. big-phil
    darn I wish I could come over. I can cook lunch. We can all ride my little crf 50. Talk Z's, and powder coat everything in sight.
  4. big-phil
    I'm the guy, I did that same thing. see look... Then things got crazy, ........see look............ It can be done, but you need alot of the turbo stuff, oil pan, oil pick up, dizzy, wire harness, ecu, turbo, manifold....etc. Good luck. I just got Megasquirt ecu, so my 83 turbo ecu, wire harness might be for sale? And I'm going to sell my 370cc injectors. hmmmmm
  5. big-phil
    :lol: Thats funny!! I just might do that!......the Elvis part.
  6. big-phil

    stock limits

    big-phil replied to a topic in Nissan L6 Forum

    About 10 psi is the limit with the J pipe
  7. big-phil
    Its going to be 80 deg tomorrow. Then turn colder thursday.
  8. big-phil
    I wonder If I can drive the car with one hand, film, talk on my cell phone, and eat pop corn all at the same time? lol
  9. big-phil
    I think I did read that post last night. Thanks for the info. Once I get to the install I might be asking for more help.
  10. big-phil
    Well I just orderd ms 1 v 3.0, relay board, relay harness, and tunning cable. $494.50 its only $$$$??? I've got a guy in Ft. Worth that will help me with the install, and he'll tell me what GM sensors I need??? Cuz, I don't know??? Gulp.... mery x-mas to me:-D
  11. big-phil
    My mouth is watering......
  12. big-phil
    Thats what I need, a camera mount. I'm tired of trying to hold the camera in one hand.
  13. big-phil
    Let me get the megasquirt first.
  14. big-phil
    I backed the car up some ramps to put teflon tape on the drain plug, and reverse light switch plug of my tranny. I pulled the plugs out stuffed a rag in the hole, then reinstalled the plug. After I was done I was going to fill the tranny back up, but when I took the filler plug out fluid was still comming out? Did I have too much fluid to start with, or was it because I backed the car up the ramps.
  15. big-phil
    I'm going to get MsNs before I burn any more tires.
  16. big-phil
    SWEET!!!! I wish I could go to his shop, but none the less he packed, and shipped everything very well. That all looks great.
  17. big-phil
    yes it does. The waste gate acuator does not bolt up. Thats where some modification is needed.
  18. big-phil
    I'm itching to run some stangs
  19. big-phil
    Thumper, I can't wait to get the MsNs.
  20. big-phil
    this is what I used. very good quality http://cgi.ebay.com/ebaymotors/3-Turbo-Intercooler-Piping-PIPE-Nissan-350Z-G35-240SX_W0QQcmdZViewItemQQcategoryZ33742QQihZ019QQitemZ290052816131
  21. big-phil
    Yes, I don't think you can run 350's in a n/a 280z. I have 370's in my turbo 280z with the turbo 83 ecu, wire harness, and AFM. I had to tighten the spring in the AFM to make the 370's work. I don't think you can do this to the n/a AFM. That is just way to much injector for your stock motor.
  22. big-phil
    well I just so happen to have the rear of my 78 280z up on ramps
  23. big-phil
    I have heard of R1's starving for oil in a wheelie. On my gixxer 1000, and my 929 I made a custom oil pick-up that pointed more at the rear of the oil pan. I could put the bike on the 12 bar and leave it running with no oil light comming on.
  24. big-phil
    Now don't get me wrong, I CAN back it into corners, I CAN bubble the rubber on the edge of the tread of the tire, and I CAN put my full leathers on and go through a set of knee pucs in less than a week on the street. Draggin knee feels good too.
  25. big-phil
    where do you guys find this stuff? Its awesome!
×
×
  • Create New...