ZT-R

Nissan part numbers pn followed by thickness (1) 1322905u72 2.98mm (2) 1322905u69 2.935mm (1) 1322905u70 2.950mm (3) 1322905u64 2.86mm (2) 1322905u65 2.875mm (1) 1322904u19 3.310mm (1) 1322904u17 3.28mm thats 11 (grabbing one of the slightly smaller ones incase the big one is too big.) Can anyone get these?

Setting the valve lash on this is ridiculous. WTF where they thinking designing it like this? Anyway gotta wait a few weeks for some shims. The lash was wayyyy out. My Richmond gears came in for the R230 rear. Get those in there at some point.

You get her up and going on the dyno yet?

1000cc injectors and 260 cams with 9.15 lift, biggest you can do without headwork.

Raw Brokerage delivery....

60gs and its yours my friend

*bump*

For future reference you need Stated Value insurance. I think Darwlick sold his for about 28k-33k, that was a rb26 240z pretty similar to my build. If I had to put a number on mine as far as what I put in it, it would be well over that.

Yea they are 220 bux 3-4 month wait... They list the same part number for both sides so that means they wouldnt sit any differently (more towards the console).

Whats done to it and what do you want for it?

I will try to get some more soon. You will probably have to cut the floor some if your 6/2. im 5' 10 and only have one click back in my sliders than where i like to sit. shouldnt be a huge deal though. It might even clear is you move the seat a tad to the center.

I modified some corbeau ones to work but yes its lower than stock. Nothing a few shims in a 240z cant fix. The headrest is taller than the oem seat so you cant get a whole lot more, but i have mine shimmed to about oem height.fitting a roll bar is gonna be more interesting now though. Will probably have to bend it backwards and kinda follow the wheel well some.

Sorry to hear that my friend. Thoughts and prayers with you and your family.

Dan, did you ever change your turbo or retune?

Bride Seat. It barely hits the door panel but when i have it out again i can slot the holes and slide it over some there is plenty of room left and right. If your really tall that might be an issue as it hits the floor side all the way back, but you can put a spacer under it and shim it up some and it would probably clear, but i dont need to so... Whatevaes.... Anyway the sliders and mounts i got didnt work/ bolt up to the seat so i made my own. More to come when some hp toys come in.

I did my tophats like that for a little while. Once i got the camber plates welded it the car handles and rides so much better. the tophats where sloppy. Just something i would have done differently right off the bat but whateves...

I just had to delete about 200 private messages it was full. I guess your quota goes up with your a paid contributor. I would think the dash that gets used would probably not be in great shape afterwards. Let me ask him what the deal would be with it.

Hey guys, Z-Force is willing to make a CF dash, just need to get him a repairable dash to mold from. Anyone have one they can send in? I'll pay the shipping.

we need a 240 dash too he said he would do a CF one if he has a dash.

Asking if Z-Force will make a one piece like this.

Now go dyno tune that thing so i can see some torque curves so i can order my twins.

I used two snap rings. No more problem...

Looks good man, if you around beaufort, hit me up.

Looks like it will fit great. I took out my passenger seat and sat it in there. Still waiting on the sliders, should be here friday.

Holy ****.