ZT-R
-
Posts
1734 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Everything posted by ZT-R
-
Top notch for Ztrix.
-
Still waiting on crank sensor parts.
-
still waiting on dyno time.
-
ill max it out on c16 just to see what it will do but i wouldn't expect more than 810. I've got the 1.05 housing so not really going for the power, wanted the spool. pretty big difference in the plots spool wise.
-
yea. Not much change in power yet picked up some but spools a lot better. still on the dyno.
-
yea you don't need iridiums yet.
-
Yea, just upgraded to a EFR 9 series turbo she is on the dyno now. it defiantly spools better than the T04z
-
dang, so much fiberglass.
-
Any progress on this?
-
I used a ford mustang one, few bux at any parts store and always in stock.
-
I run a quest one with slight modifications. Make sure your wiring is up for the challenge.
-
Do you have any height measurements off the front of the pan section (for rack clearance)?
-
just some tomei pro cam 260/10.15 i think. didn't want to cam the hell out of it. she would wake up quick some a little more lift and 280-290s.
-
torque isnt right, thats tach breakup. lol i wish.
-
I don't think i have a pic of the full graph before we took some out for the street. let me see what i got.
-
Awesome work. Wish i had room for a dry sump. i have the pan now known as the mckinney and have about 1/32 of room between it and the rack. can't shim engine up anymore either.
-
Love the dash man.
-
Sounds like you should stick to the 25 with a rb trans. Im putting 715 to the wheels on my r34 RWD trans. You'll be fine with 400.
- 1 reply
-
- 1
-
-
I have it but haven't used it. I usually run 22 on the street.
-
I used the lathe to cut the axle down for the Quife install. With the axles being hardened steel a bandsaw isn't gonna do it.
-
Hoods fine. it does sit up in the front because i don't run the hood spring cause my intercooler is all in the way but thats not the hoods fault. It doesn't have the ledges on the side of the hood like the OEM one does so the gaps look larger than stock but they aren't.
-
I use the lathe non stop, as well as my tig and plasma cutter.
-
Don't use red on anything on a datsun. Leave that for the Semi's unless you have a lot of acetylene and 02 laying around.
-
I think they are ultra fine if memory serves.
-
I'll just leave these here.
