Search the Community
Showing results for tags 'Injectors'.
Found 9 results
-
I am looking go find suggestions on diag for a fuel issue with my 1977 280z. It's as if all 6 injectors are clogged (though highly unlikely). I have fuel pressure at the rail but I was thinking that the BCM could be the most viable answer (not commanding the injectors to fire) I have spark at every cylinder new pump and filters. Seasoned S30 mechanics any suggestions?? I don't have a lot of diag experience and appreciate any input (except the negative BS).
-
Currently building an L28ET and I an looking to buy: 1. Megasquirt relay and cable (MSRelay-C / MSRelayCable) 2. 54 mm Optical Trigger Wheel for Nissan L28ET 3. 440cc Injectors 4. Fuel Rail, 11mm injector size Thank you!
-
Does anyone have a set for sale? I can't afford to buy refurbished ones. I have an ultrasonic cleaner and test bench so it's okay if they haven't been cleaned. Thanks!
-
Hey guys, quick question. I have an L28ET in my car (with MS) and I am upgrading to supra injectors, the 7mgte ones. From what i have researched, they are 440cc and work with a pallnet 11mm rail, which I just ordered from him. I am confused as to what impedance I need. Here's what I currently believe to be true: L28ET injectors are low impedance, and require the resistor pack to make them work. 7M-GTE injectors are also low impedance, and should be used in my system with my current resistor pack. However, all the 7m-gte injectors on eBay (don't worry, not ordering from there) are listed as high impedance. I just don't want to order the wrong injectors, is there anyone who is running the 440cc injectors on an L28ET who can chime in to what their wiring system is? I don't want to order them before I at least have some answer.....There is so much weird and confusing information out there about this stuff. Thanks in advance!
-
I've been putting in alot of time in the garage trying to tuck and shave my bay along with installing megasquirt. My only question about the whole thing is, how am I to ground the million black wires? I've read NOT to ground them all in the same spot. I've also read NOT to solder them into a bigger wire and put it in a single location. But I HAVE heard that I should ground everything to my block. I'm currently wiring the injectors. Where do I ground this bundle of 6 black wires? Tha k you very much for your response. Sorry if this is in the wrong place or already posted. Still trying to figure out forums.
-
Looking for advice from member who used a certain company to service, clean and balance their used injectors. Inj on right Link, name of company, contact info. Please
-
Hey guys. I just bought a set of Delphi 42# injectors to begin upgrading the fuel system on my 1982 280zxt. I was wondering what size fuel rail I needed to get? Seems like 14mm is what I am looking for Also, I've been doing some searching and it looks like there may be a problem mounting the Delphi injectors to the stock intake manifold. Does anyone know if these injectors will work without modification? Thanks everyone
-
Paypal ready. PM me! I'll buy them today!
-
I'm rebuilding an l28et and noticed this injector looks off. At least the cap is missing, maybe more. Is it toast? I can't find anything to reference what it should look like without the cap. Thanks in advance. And a different injector for reference:
