madkaw Posted December 15, 2014 Share Posted December 15, 2014 Are these dimensionally the same as the z32 trans. I thought I remember reading that there was only a 1/4" space all around on the tunnel Quote Link to comment Share on other sites More sharing options...
GeeZ Posted December 15, 2014 Share Posted December 15, 2014 I bought a couple of your Z32 trans adapters in the past. I have a newly acquired 280Z that I would like to try the new adapter in. Quote Link to comment Share on other sites More sharing options...
Tony D Posted December 21, 2014 Share Posted December 21, 2014 So e of the R200's have brackets for the Pulser Wheels on the ABS System. Those will drive an electronic speedo quite nicely, there is one on the input flange on some Euro Model...maybe on US Spec Stuff as well. Nice rigid brackets and mag pickups ready made! Just a thought. Quote Link to comment Share on other sites More sharing options...
Daphur280 Posted December 22, 2014 Share Posted December 22, 2014 I see you're putting a 3D printer to some good engineering use! I'm excited to see how this turns out Quote Link to comment Share on other sites More sharing options...
240hoke Posted January 10, 2015 Author Share Posted January 10, 2015 (edited) Hey Guys, More progress on the adapter plate this past week, I recieved the first prototype plate. So far it is looking very promising, everything bolted up nice. I am waiting on a few more parts to get in before I can finalize measurements for the flywheel spacer and starter adapter. With any luck I may have a protype kit ready to test in a month or so! I also had a L28et car in my garage this past week and got a chance to take some measurements for the shifter location. It looks like the shifter relocater which I already make for VQ swaps will place the shifter in the stock location! I was more worried about it before because I have my VQ back against the firewall which is a couple inches further rewards then it will sit mated to the L28. Will post more updates as I go. -Austin Edited January 10, 2015 by 240hoke Quote Link to comment Share on other sites More sharing options...
Tedr03 Posted January 10, 2015 Share Posted January 10, 2015 Really excited for this! Good work! Quote Link to comment Share on other sites More sharing options...
gacksen Posted January 10, 2015 Share Posted January 10, 2015 looking forward to this. Quote Link to comment Share on other sites More sharing options...
johndaniel.b.coffin Posted January 10, 2015 Share Posted January 10, 2015 I want one.... 1 Quote Link to comment Share on other sites More sharing options...
black240 Posted January 11, 2015 Share Posted January 11, 2015 (edited) Subscribing Note: I currently have my motor out and am looking into replacing my trans setup. Let me know if you still need a Z for the prototype. I PMed you on FB. Edited January 11, 2015 by black240 Quote Link to comment Share on other sites More sharing options...
z-ya Posted January 17, 2015 Share Posted January 17, 2015 Really nice work Austin. Quote Link to comment Share on other sites More sharing options...
hwvigo Posted January 20, 2015 Share Posted January 20, 2015 Wow this is nice. Very interested Quote Link to comment Share on other sites More sharing options...
michael wales Posted January 22, 2015 Share Posted January 22, 2015 keeping an eye on this and your other projects. Quote Link to comment Share on other sites More sharing options...
Tedr03 Posted February 19, 2015 Share Posted February 19, 2015 Any updates? Quote Link to comment Share on other sites More sharing options...
240hoke Posted February 26, 2015 Author Share Posted February 26, 2015 Hey Guys, No updates unfortunately, I've had to shift priorities a little bit. I have all the rest of the parts waiting on me for mockup just need to make a little time!! I'll update when I have some more progress hopefully within the next week or two. -Austin Quote Link to comment Share on other sites More sharing options...
1vicissitude Posted February 28, 2015 Share Posted February 28, 2015 Any idea on the weight gain from the trans swap? Quote Link to comment Share on other sites More sharing options...
heartofthemonster Posted May 24, 2015 Share Posted May 24, 2015 Is this still in the works? Definitely interested Quote Link to comment Share on other sites More sharing options...
JakeWard Posted June 2, 2015 Share Posted June 2, 2015 Is this still in the works? Definitely interested Definitely in the same boat. Still a possibility? Quote Link to comment Share on other sites More sharing options...
gacksen Posted June 2, 2015 Share Posted June 2, 2015 me too as gearbox synchros are on their way out and wanna end that Quote Link to comment Share on other sites More sharing options...
BR3NNAN Posted June 3, 2015 Share Posted June 3, 2015 Im definitely interested as well. I was planning on doing the z32 tranny swap, but this seems like a nice alternative. Quote Link to comment Share on other sites More sharing options...
harlest Posted June 3, 2015 Share Posted June 3, 2015 Does anybody know the part # or specific year of the trans that we should be looking for? I'd like to get a jump on this. I've read that some early years have problems. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.