gvincent

Any other pads to suggest in the same price range as the Axxis ones, everybody is out of stock or say discontinued or no date for back orders From importers.com Unfortunately we found out that we're out of stock on the Rear Axxis/PBR Ultimate Brake Pad Set you ordered and the manufacturer is backordered with no ETA. From FRsport.com Hello, Unfortunately that is discontinued and no longer available at this time. Going to run stock front for now then S12+8 later do maybe 1 or 2 track days a season rest is shows and street cruising. any suggestions in the 40-60 dollar range? the AXXIS were $50

Received the MM brackets today from Joe, nice cast and machined pieces, I'll prime and paint this weekend and get some bolts at the local hardware store. are any washers/lock used? Rotors are on the way. Are these the same pads? I will call them in the morning http://www.frsport.com/PBR-D-341-RU-Ultimate-Rear-Brake-Pad-Set-Nissan-240SX_p_14038.html They are only $50 with shipping, IRP is $15 more with shipping Thanks for the links on fittings/hoses I'll hold off on ordering until i have everything mocked up and measured I have had real good luck with this company and generally get items overnight to my local speed shop because they are local to me and they seem to have some unusual fittings that I needed when doing my Aeromotive fuel pump system. http://fragolaperformancesystems.com/catalog/fragola-performance-catalog.pdf

MM brackets have shipped from Joe, ordered the 84-85 300ZX solid rotors from Rock Auto. Going to order some pads tomorrow, don't think I can afford the Carbotech pads right now though so the Axis Pads will probably be ordered. Now to search for the Brake hoses so 14" length worked on the passenger side, Longer or same length for drivers side? What size banjo fitting? -3AN hose and M10 X 1.0 fittings I'll have it on the lift this weekend so I am sure I'll be able to answer a lot of my own questions once I can see everything.

Thanks Miles I have been following your write ups on all these conversions and your List, main reason I decided to go with the 240SX a few years ago was your write ups and your current set up at the time was the Toyota solids up front and the 240SX MM setup in the rear. I need to source the rest of the parts, the brake line hoses, e-brake clips/hardware, caliper bolts.You recommend the Axix Ultimates Pads do you have a part number? Is there anything else I need besides the 84-85 300ZX 4 lug NA rotors? Do I need to have them turned down a bit? I thought I read this somewhere in the 22 page FAQ Thanks again, Greg

OK,i'm a little slow, 3 years ago I bought the 240SX rear calipers to eventually do the Ross/MM 240SX rear disc upgrade. Yes I know MM does not exist and that Ross passed away, may he rest in peace. Well I am in the middle of a complete rear overhaul, rebuilding my CLSD, finally installing my 300ZX CV axles, and companion flanges, doing GC coilovers and am doing the rear disc conversion at the same time while I have it all apart. Where can I source the MM 240SX caliper brackets that Ross made, is there anybody still making these? I searched Zcardepot and silvermine and they are all supplying brackets for the Maxima calipers. If they are no longer being made are there any drawings available so I can get them made? Also I have searched all the Brake upgrade FAQ's and have a simple question I couldn't find an answer for: I have seen the Toyota Caliper upgrade discussed hundred of time but could not find one single actual part number that can be used for ordering. I should probably post this as a separate question but what are the part numbers for an S12 or s12+8 solid caliper? I might do the front also while doing the coilovers Thanks, Greg

Any update on these steel braces? I'm still interested Greg Vincent

Thank you Wayne, here are the files you so kindly shared for everyone to use: ENG_CD_964727_D1.pdfENG_CD_964735_C31.pdfENG_CD_964736_C21.pdfENG_CD_964762_C1.pdfENG_CD_964761_C.pdfGER_CD_1355050_A41.pdfstd-pwr-GER_CD_1355049_A91.pdf

I've been trying to buy them off Kash for over a month but no response, I can't wait any longer so what do you have and what do you want for them. I need a working emergency brake so most wilwood systems don't have this. If nothing available I'll break down and contact Silvermine. Thats, Greg please email me gregory.vincent@comcast.net

I know this is a 10 year old thread but did anybody ever find out about replacement terminals for the Catera Block fuse holders?

Ken are you still selling these parts, sent you a PM on the brakes 4 weeks ago. Please call me Greg

Sent a PM 3 days ago, let me know when you can? Thanks, Greg

Ken, you still selling these parts? Haven't heard anything for a month. Thanks, Greg

How about the Scarab Pillar emblem?

I'll take one, will fit 280Z with CLSD 2.Greg Vincent

Joe, I am interested in a pair of the Billet Z31 CV/Companion flange adaptors. I will do it, but nervous about needing 4 other people and 10 weeks could be a long time. can you tell me how tall the adaptor is? the stock flange is 2 inches and I don't want to add any more length. Anyway to shorten up the ten week time? Thanks, Greg

Joe, I checked your web site ;http://www.chequeredflagracing.net/Datsun.html I sent you an email from the website anybody else want to put in an order with Joe thanks, Greg

Hey Ken, Hope you had a good trip, welcome back. I'm still interested in all the parts I PM'd you on. Send those pictures when you get settled back in. Merry Christmas Greg

Anybody else want to join it so we can get a group buy going here from Joe? Joe, I will do it, but nervous about needing 4 other people and 10 weeks could be a long time. can you tell me how tall the adaptor is? the stock flange is 2 inches and I don't want to add any more length. I can have my flanges machined and a plate welded in and machined to fit but I would add some thickness to the flange. Thanks, Greg

PM sent to AKIRA Joe, I will do it, but nervous about needing 4 other people and 10 weeks could be a long time. can you tell me how tall the adaptor is? the stock flange is 2 inches and I don't want to add any more length. I can have my flanges machined and a plate welded in and machined to fit but I would add some thickness to the flange. Thanks, Greg

OK, have a safe trip, talk when you get back

I am also looking for the 280Z 27 spline to 4 bolt 300ZX CV companion flange adaptor anybody else have a pair? thanks, email me if you do Greg gregory.vincent@comcast.net

Hey Kev, still waiting on those Pictures, I PM'd you again Thanks, Greg

Oh well wasn't fast enough for the billet adaptors and exhaust Can you send me pictures and dimensions of the oil cooler, I am limited for space. Can you also send pictures of the strut tower bars? Thanks, Greg I'll PM you as well

I'll take the MM billet companion flanges for the 4 bolt 300ZX axles. $250 I'll also take the 2.5 to 3” mandrel bent downpipe - $75 3-Inch Exhaust w/ Magnaflow Muffler - $75 and if you can post Pictures of the oil cooler with dimensions I will take that also. PM me, I'll need shipping estimates for shipping to 02766 Just saw the previous commitment posts, if they fall through let me know, I have paypal and ready to go. Thanks, Greg

Thanks John, Now I need to find out the tokico illumina BZ-3102 and 3103 rod diameter. Tried a quick google search and found nothing, I'll try calling them today Linear or progressive and what length will be my next research project Anybody else use the Koni Bump stops and which model did you use and why? Thanks again