Jump to content
HybridZ

Twoeightnine

Members
  • Posts

    506
  • Joined

  • Last visited

Everything posted by Twoeightnine

  1. Yes..thats the one. I just noticed that the link that I placed is not working:cry: But yes that is the same unit. Grainger is, of course, a tad high with their stuff. Thanks Darrel!
  2. For accuracy, dependability, and ease of use try a dedicated drill sharpening unit. At 39.00 dollars a pop, and up, for larger bits it wont take long to pay for it's self. Check this one out. $179.00 http://www.grainger.com/Grainger/wwg/productIndex.shtml And you can get a stone dresser if you dont want to get the dedicated unit. A stone dresser will true up the stone face.
  3. How about, clean the chassis real good. Inspect it real close inside and out. Note: I found a rusted through area about the size of a quarter under the sound proffing tar mat!!! It had started from moisture that crept under a frame rail flange below the car. Pushed my finger through it by accident. Used a large flat bladed screwdriver to push check similar areas. I have been pleased with the use of, and the reputation of, Masterseries Coatings. Especially where not exposed to the out side (where it can be seen). It's tough stuff and can be primed over without any special tye coats. Can be sprayed as well but, I like to lay it on the areas that I have been using it for, with a cheap brush! http://www.masterseriesct.com/ The link has some good reads in it. There are other dealers but I like this guy and he is not the most expensive dealer out there. If your project gets to be to much....I'll come pick it up for free!!
  4. Howdy boys. PayPal sent for two more! Hang in there.
  5. Now I feel better. We all are truly blessed...when we are free.
  6. auxilary wasnt chiming, but he was watching! Quick reply. Excellent words, makes sense. Especially considering the source. Thanks,
  7. zlalomz.... You did a fantastic job of turning around this thread. Interesting stuff. I expected it to crater in. Notice that auxilary has not chimed in. I dont think it was his intention to start an interesting conversation. I certainly admire the culture of different peoples. It can be fascinating to see how the world differs but the human spirit stays strong. I will admire the people, but not the failed political system.
  8. Too bad they couldn't have slowly cut his head off with a rusted kitchen knife. Now that would have been a fitting end for the rat bastard!
  9. Ive got em beat down to 48. Last year it was unlimited but, I hit 60 most of the time. Only good thing, hourly and time and a half. Would rather be home fiddling with the misses or the Zcar. Of course in that order.
  10. Thanks for helping me solve the mystery wigenOut-S30! You sir are an awesome customer! Your shirt has been shipped! Thanks for all:D
  11. Wow guys... I thought I would post before this one hits the tool shed. See how fast politics go down the tubes. Its just to touchy to make light of. Need a select audience to really make it work. In close.....jmortensen.....nice shot man! Popnwood...Ditto! http://forums.hybridz.org/showthread.php?t=105885
  12. wigenOut-S30... You have a PM. Rest assured, it will be handled imediately! Thanks for bringing it to our attention.
  13. Thanks guys.. I'll keep an eye out and grab the last couple just to be sure. Tt's a supppositious thing. If you cant get the first, get the last. Hope it goes to a good home regardless.
  14. Marduke.... Your XXLs are in! Still want em!
  15. Rest assured, if I am lucky enough to win it, it will live on in Z glory!! Thanks for the shout Mike.
  16. I have one but what are the chances of getting the 75th one? Are they numbered? Do you have a log of the purchases? Are we free to give the motor away? Are there rules to such things? Do you care? Peace..
  17. Very cool that they are starting to arrive. I could tell that you all were getting a little antsy. Thanks for your patients! This summer I have three different Z shirts that are being produced. I hope you all will give them some consideration too! Many thanks for your support! Zaddict....where have you been dude! Thanks for your interest! PayPal Zshirt4u@aol.com and dont forget to include your sizes with your order!
  18. Workinprogress... I'll bet they are waiting patiently in your box as we speak! Go home... its Friday!!
  19. J. Soileau. Even the farthest addresses should be arriving by tommorow. You might have yours in your mail box as we speak! Let me know otherwise.... Boobala like cotton!!
  20. Thanks yall for your patients. All orders, to date, have been filled and shipped!! We have all sizes in stock now, so thanks to you all, we can now realize next day shipping on all orders. Many, many thanks!! Oh yes.....100% cotton!!
  21. Got ya covered Marduke! Thanks for the wait!
  22. One would think that the dealer Mechanics would be in the know about fuel issues in the industry. And surely they would never recomend a fuel octane that was less than the manufactures recomendation. But, word of mouth does not the truth make. I did some searching for old and bad gasoline issues and found nothing other than the ordinary "contaminated in shipping", dont forget to clean between fuel types, fuel evaporation issues and such. I say, load your rig up with high octane and crank up the spool!!! Maybe it's all just baloney!
  23. And of course when the "lamp" is finally replaced. (1) to announce....."and then there's the BLING"!
  24. 200 engine, 170 wheel whats the diff. Patato....PatAHto. The mileage/kilometer being high, wouldn't one want to to be concerned about pumping up the H/P?
  25. Hey all....They're here!!! We will start shipping them out tomorrow 05-24-06! There are still some left so dont hesitate to pick one up today! Marduke....I'll have to check invoices to be sure. But if memory serves, I ordered four XXLs, and I believe we have an order for two. I think we can cover you. I will verify this tonight as I finalize all of the invoices. I can PM you to confirm if you would like. Thanks for your patients!
×
×
  • Create New...