Mike kZ

Definitely a place to start. Change that cap, it could have cracks running up to where you connect the plug wires and is arching.

Very cool!

You mean like this or this

I noticed his (SPIIRIT), deleated posts also, and PM'd him to find out why. This is what he wrote: Dear Mike; I don't really feel I belong in this site because I am strictly hot rod oriented. Besides, I have nothing more to offer. I benifitted much from the experience however and am grateful for that. Sincerely, Tom. _________________ Know your enemies: Detonation, Pre-ignition, Cross-fire and Piston speed! SPIIRIT

The engine pic here is a Corvette LT1. It does not have a distributor, it has a pick-up at the crank. It is fuel injected, so there is no round air filter on top. Are you sure you have a 6 speed, and not a 5 speed?

I used the stock 240 inner boot, but cut it down some. Then I weaved in a long tie rap and tightened it around the shifter. I put the console back on, and the stock outer boot fit well over the shifter.

uh....ya.....you're right.... it's UGLY!

Try doing a search first, there is plenty of info on this.

Go to the junk yard, and get one from a T5. There should be plenty at the yard. Plus it has a bleeder screw, and it works with a T56. Also don't worry about it being used. There isn't much too them inside. If you want to tap this one, there is more material around the hole, so it won't crack. http://www.hybridz.org/phpBB2/viewtopic.php?t=27526&highlight=t56+slave+option If you have your heart set on a new T56 one, I have a brand new in box T56 slave and master for a Camaro ( '93 - 97 ). $75 + shipping.

Wow!.... Any ideas what those white canister thingys mounted to the ceiling are? Maybe some sort of fire protection?

It's alright to post this kind of thing, but post it in it's PROPER FORUM! DO NOT post a joke in a tech forum!

I've seen many Chevy engines in AMC cars, It shouldn't be hard. You need to go south to buy a good 240Z.

Did you guys look up a couple of posts? http://www.hybridz.org/phpBB2/viewtopic.php?t=24891

Is your mom Shirley Muldowney or something?

Any pics of this 9 sec machine?

He needs your physical address so he can send you his FAKE check. I don't thin FedX will deliver to a P.O. Box, he can't send it by US Post, because I bet he is not even on US soil. Don't go near this scam!

A '93 to '97 T56 will bolt up to a chevy block. But you need a special flywheel, and clutch to make it work. ( Centerforce has these)

Not exactlly a great subject line to use at HybridZ!! This site was formed for people who have V8s in Zs! Now on the other hand, that is a Ford Just kidding!

See buy/sell/trade section! http://www.hybridz.org/phpBB2/viewtopic.php?t=27843&highlight=

Check out this car also. http://www.hybridz.org/phpBB2/viewtopic.php?t=27162&highlight=

I'm glad it worked out!

Happy B- Day!! Your car is looking very good indeed!

One wire from the vss is a ground. It doesn't matter which. The other goes to your ecu. Try that.

The answer to your question is no. You have to fab everything yourself. I did it, and it is a lot of work. Check my link below for pics.