Jump to content
HybridZ

loy

Members
 View Profile  See their activity

  • Posts

    438

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by loy

  1. loy
    Got the new brackets and everything fits. They (brake calipers with parking brake) even fit my konig rewinds 15". The sticky wheel weights I have on wheel were to thick and caught the parking brake mechanism. Have to get the wheels rebalanced with either slimmer weights or conventional weights.
  2. loy
    Depends on the igniter you get Here's one for the rb. http://wiki.r31skylineclub.com/images/6/6a/Pinouts_R33_rb25_wiring_diagram.gif If you look in the bottom left hand corner you should be able to figure it out.
  3. loy
    You can order transistors and wire them up inside mega squirt. http://www.diyautotune.com/catalog/bosch-bip373-coil-driver-mod-kit-p-230.html https://www.fairchildsemi.com/datasheets/IS/ISL9V3040D_F085.pdf http://www.digikey.com/product-detail/en/ISL9V3040P3/ISL9V3040P3-ND/820825
  4. loy
    Identify what signal it is first. Looks like it could be the ignition start signal. http://homepages.vodafone.co.nz/~lakewood/Skyline/Wiring-Loom-etc/RB20DE-DET-Pinouts.jpg https://www.hackedecu.com/wp-content/uploads/2013/01/pinout-nissan-rb26dett-page-001.jpg
  5. loy
    Yeah he said they will send some new brackets.
  6. loy
    That's nice that yours went well. I went to go install mine today but the bracket doesn't seem to be right. The rotor touches the bracket. I am pretty sure I have mount installed correctly with the logo facing outward.
  7. loy
    This guy used to sell them. I'm not too sure if he still does. http://retrospec-datsun.blogspot.com/2013/05/retro-spec-240z-260z-air-dam.html?m=1 There is a thread about him on this forum somewhere.
  8. loy
    When you smell fuel and it not starting the plugs are probably soaked. Check all the connectors at the ecu and sensors. I've had it where the terminals in the connector not making good contact.
  9. loy
    Could be custom. Looks like IMSA flares. Don't buy from this site though. http://www.showcars-bodyparts.com/Z-70-78-frontglassIMSAflares-120-30lbs.jpg Looks like they have them at ZCCJDM http://www.zccjdm.com/catalog.php/azcarbum/dt73726/pd2149156/IMSA___FLARES__
  10. loy
    http://i.imgur.com/CR5FEsB.jpg http://i.imgur.com/cYHNbAG.jpg http://i.imgur.com/Xs9Cwqf.jpg http://i.imgur.com/SRalLOL.jpg
  11. loy
    Just talked to Gabriel, they will come in a later package when they get them from their supplier. "We are waiting on the ebrake components to come in from our supplier."
  12. loy
    Really? I just opened my package and no brake cable was included . Will have to email Gabriel.
  13. loy
    Brakes just got delivered. Too bad I am not home to receive them. I will take pics when I get home.
  14. loy
    Anyone purchased and received rear kits yet?
  15. loy

    got demoted

    loy replied to PLATA's topic in Non Tech Board

    Us plebs take the internet seriously.
  16. loy

    got demoted

    loy replied to PLATA's topic in Non Tech Board

    You are now one of the same with us plebs.
  17. loy
    Yes you can use the harness. Add the resistor in line with the injectors.
  18. loy
    With ms2 and pwm and if you have the circuit installed.
  19. loy
    After start enrichment and warm up enrichment need to be adjusted.
  20. loy
    If you have spark at the wire going to the dizzy and none coming out. Check the rotor and cap.
  21. loy
    If their fronts have a 5 lug option. I am sure their rears will too.
  22. loy
    I and many others bought ZG flares through them.
  23. loy
    Connect at the coil.
  24. loy
    Correct, look up the wiring diagram/service manual and you should be able to wire up a standard automotive relay.
  25. loy
    They are working fine. I do have a cap on H1 on my megasquirt.
×
×
  • Create New...