Jump to content
HybridZ

e_racer1999

Members
 View Profile  See their activity

  • Posts

    641

  • Joined

  • Last visited

 Content Type 

Everything posted by e_racer1999

  1. e_racer1999
    agreed .
  2. e_racer1999
    we're gonna need pics to verify the viability of this story. haha, seriously tho, good job on not getting a ticket
  3. e_racer1999
    i don't think that's right..... i think that's the CR for the dished pistons. at any rate, if my F54 block is cracked, i have a dished block that i would gladly trade for your F54!
  4. e_racer1999
    ^mack, that's what i was going to say. these figures are apples and oranges. the difference between which accessories, etc, are on which will cause fluctuation. if we know the weight of these accessories (a lot easier to find than the weight of the blocks) then we can come up with accurate comparison figures. Jason
  5. e_racer1999
    not much you can do. if you can file it down without it greatly decreasing the strength and integrity of the rim, then go for it. but you would probsbly have to remove quite a bit of metal. are your rims painted? if so, file down that which protrudes from the surface of the rim, fill with JB weld, then paint over.
  6. e_racer1999
    this thread is hilarious..... let me try to remember any of my stories.....
  7. e_racer1999

    gas?

    e_racer1999 replied to a topic in Nissan L6 Forum

    ya, what head are you running and which pistons? where are you in san diego? oh, and run the lowest octane without pinging for optimum performance
  8. e_racer1999
    no problem! it'c coming along nicely. so you did this just in publisher?
  9. e_racer1999
    looks good! if it were me, i would make the picks hyperlinked as well, but maybe i'm picky.... anyway, good job! Jason
  10. e_racer1999
    amazing......
  11. e_racer1999
    it truly is a nice car in person. i saw him driving it last week here in la jolla
  12. e_racer1999
    i don't know his name; he is/was a member on classiczcars.com. VERYCLEAN CAR! i must repeat VERYCLEAN CAR! he made all of the fiberglass molds himself, and i happen to have the molds sitting in my backyard (was moving, couldn't store them.... "sure, i'll take 'em off your hands!") he braced it very well to counteract the force of no roof. the flares on the fenders are very smooth and subtle. i believe it has a miata top on it
  13. e_racer1999
    well let's see.... a dremel will set you back about 60 bucks..... but seriously, i'm porting my head with a dremel. although i was taught by my dad who has 20+ years experience in porting heads....
  14. e_racer1999
    do you have a photo-ready cell phone? if so, PM me your number and i'll send you a cameraphone pic of my intake. it's off the car right now, but you'll get the look of it... Jason
  15. e_racer1999
    that's a nice nova! and Z, of course
  16. e_racer1999
    ok, i'll post some pics up as soon as i can figure out why photobucket won't let me login >
  17. e_racer1999
    i was noticing the FJCruiser's headlights the other day. they appear to be 7" roundies, but modernized. are they HID compliant, anyone know?
  18. e_racer1999
    that's crazy. pretty soon china will be making S30s again!
  19. e_racer1999
    i currently have the velocirty stacks under k&n filters. i would gladly sell the k&n air cleaner assemblies and go with my future plans, but i think i'll be the nice guy and tell you about my setup so that you may get a better one to start out with. i plan on doing an air box similar to the stock one, except have it duct air from in front of the radiator support through a cone type k&n to get cold air in instead of sucking in the hot engine bay air.
  20. e_racer1999
    just read this thread all the way through for the first time. THANKS FOR ALL YOUR HARD WORK!!!!
  21. e_racer1999
    for us bass ackwards americans, 150kg = ~330lbs
  22. e_racer1999
    nice! i await the result!
  23. e_racer1999
    a post from nicoclub from someone who did a swap into a 240SX: http://forums.nicoclub.com/zerothread?id=16068 "Fully dressed, this is a very heavy motor too. With a/c, alt, manifolds on, weight came out to 553 pounds"
  24. e_racer1999
    hahahahahahahaha!!!! i'm actually very interested in seeing if this VH thing pans out. older Q45s are easy to come by and CHEAP
  25. e_racer1999
    you can get lash pads from MSA. did you swap out rocker arms or resurface when you installed the cam?
×
×
  • Create New...