Rayven14 Posted December 5, 2011 Share Posted December 5, 2011 I also DO NOT pay for the cost of shipping, please write me with your address for a final shipping quote before sending your final payment. Thanks guys Quote Link to comment Share on other sites More sharing options...
EvilC Posted December 5, 2011 Share Posted December 5, 2011 Cool, just let me know when you are taking payments from the rest of us who are not on the list yet. Quote Link to comment Share on other sites More sharing options...
Rayven14 Posted December 5, 2011 Share Posted December 5, 2011 Im probably going to be doing it a bit different as far as payment goes. Trying to figure out user names and emails and paypal and the forum is WAYY!!!!!! to complicated. I'll probably be working with paypal and basic email to avoid any further confusion... on my part. Quote Link to comment Share on other sites More sharing options...
iBang Posted December 5, 2011 Share Posted December 5, 2011 Should I PM you for a quote with shipping? I hate to spend the money right now but I want to put these into stock for the future. Quote Link to comment Share on other sites More sharing options...
Projekt sixSTAR Posted December 5, 2011 Share Posted December 5, 2011 Pete Just make sure you don't give my top section away from the busted up panels I gave to you. And I can just pick up from you instead of shipping. Keith P. (aka k.pacoma@gmail.com / Projekt sixSTAR) Quote Link to comment Share on other sites More sharing options...
Rayven14 Posted December 5, 2011 Share Posted December 5, 2011 Keith, Damn dude did you want those back? I trashed them out already. No Im kidding, dont worry I'll hook you up and deliver them as a way of thanking you for letting me use them. IBang, ya PM me for a shipping quote. Quote Link to comment Share on other sites More sharing options...
Richs72RBz Posted December 5, 2011 Share Posted December 5, 2011 So where are you at on the list right now? I'm #10 on the list just trying to get an idea of the eta. Quote Link to comment Share on other sites More sharing options...
Rayven14 Posted December 5, 2011 Share Posted December 5, 2011 240slidekat, I actually have 4 sets of panels that are ready to ship and 1 in the mold that are pending payment and should have the other 5 completed before the weekend. Your looking at a week maybe? Quote Link to comment Share on other sites More sharing options...
ZT-R Posted December 5, 2011 Share Posted December 5, 2011 I like being top of the list! pm sent. Quote Link to comment Share on other sites More sharing options...
hoho Posted December 6, 2011 Share Posted December 6, 2011 I'm second! PM sent for payment info. Thanks Rayven14. I was drooling over the panels you made a couple of years ago. And so glad you are making them again! You the man Quote Link to comment Share on other sites More sharing options...
kj280z Posted December 6, 2011 Share Posted December 6, 2011 I'm in!! As you can see I was the 2nd or 3rd one to commit way back in August... I hope I'm one of the next ones to get my panels so my daughters can have them under the Christmas tree for me... Don't let me down! Quote Link to comment Share on other sites More sharing options...
ZT-R Posted December 6, 2011 Share Posted December 6, 2011 As you can see I was the 2nd or 3rd one to commit way back in August... I hope I'm one of the next ones to get my panels so my daughters can have them under the Christmas tree for me... Don't let me down! The hell with that, install them and park your car under the tree... Gotta think proactively Quote Link to comment Share on other sites More sharing options...
Rayven14 Posted December 7, 2011 Share Posted December 7, 2011 Shipped out panels today for all the guys that are paid in full, still got two sets and a third laying in the mold. If anyone wants a set paypal me and I can get em shipped today. Even if you dont have a deposit with me it doesnt matter as I'll probably have them all done by the weekend. Quote Link to comment Share on other sites More sharing options...
kj280z Posted December 7, 2011 Share Posted December 7, 2011 (edited) I claim a set - please email me with the total including shipping to zip code 33547 Regards Ken Edited December 9, 2011 by kj280z Quote Link to comment Share on other sites More sharing options...
Rayven14 Posted December 8, 2011 Share Posted December 8, 2011 So just remember that when you guys get your panels, the back edge must be lined up in order for the door pull to be correct. Remember when I said that I was working on getting that all sorted out? well, I got it all sorted out. I made the attached jig )see pic) so that all the door pulls are in the exact same location. I did however elect to make the door pull holes a little smaller than normal so there is more than enough wiggle room. Don't be surprised if you have to get that file out and make it a but bigger. You may want to do that before upholstery. Quote Link to comment Share on other sites More sharing options...
Rayven14 Posted December 11, 2011 Share Posted December 11, 2011 Just bonded and riveted these up for a one of the local (to me) forum members, gonna deliver tommorrow and I hope he's happy with the finished product. Quote Link to comment Share on other sites More sharing options...
twofouroh Posted December 19, 2011 Share Posted December 19, 2011 Are you still making the non-speaker type as well? If so, are they $250 also? Quote Link to comment Share on other sites More sharing options...
EvilC Posted December 19, 2011 Share Posted December 19, 2011 How are we doing on the list? Ready to buy! Quote Link to comment Share on other sites More sharing options...
camerashy Posted December 19, 2011 Share Posted December 19, 2011 Are you still making the non-speaker type as well? If so, are they $250 also? +1, if you don't find a buyer for the busted CF ones, I'd like a price, think we talked about this some months back. Cheers James Quote Link to comment Share on other sites More sharing options...
EvilC Posted December 21, 2011 Share Posted December 21, 2011 Payment sent! Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.