mutantZ Posted October 28, 2015 Share Posted October 28, 2015 Came across this on facebook today, one of the nicest I have seen so far. Very tasteful. Quote Link to comment Share on other sites More sharing options...
revmatch.net Posted October 28, 2015 Share Posted October 28, 2015 Sung Kang's build is pretty amazing. From the shell I saw roll in to where it is now. its quite the transformation especially considering the limited amount of time they have. Can't wait to see it at SEMA. Quote Link to comment Share on other sites More sharing options...
baby_Carlton Posted October 28, 2015 Share Posted October 28, 2015 Wow they look great, really wish someone would sell those. Quote Link to comment Share on other sites More sharing options...
antivenom Posted October 28, 2015 Share Posted October 28, 2015 (edited) carbon signal plans to release their 240z line after SEMA. their prices are generally reasonable, at least for Z34 stuff, but the trick is that everything is pretty much group buy since they are in saudi arabia, (or abu dhabi, can´t recall which). i personally want everything i´ve seen in the fuguZ build so far, at least as it relates to the interior. so sign me up for the first GB. Edited October 28, 2015 by antivenom Quote Link to comment Share on other sites More sharing options...
Rayven14 Posted October 28, 2015 Share Posted October 28, 2015 Ya know I can make these in Fiberglass and carbon? the pic on the left is my own design with speaker provisions and the right side is a factory panel. Both are wrapped but I can make them in real carbon fiber as well... just sayin. Quote Link to comment Share on other sites More sharing options...
antivenom Posted October 28, 2015 Share Posted October 28, 2015 (edited) those are pretty slick. what would you expect the going price for a set of those would be? an estimated ball park range would be enough to satisfy my curiosity. edit: nevermind... read the other thread http://forums.hybridz.org/topic/101709-fiberglass-door-panels-wspeaker-holes/page-23 Edited October 28, 2015 by antivenom Quote Link to comment Share on other sites More sharing options...
antivenom Posted October 28, 2015 Share Posted October 28, 2015 also, fwiw, the carbonsignal ones are upholstered bottoms with carbon top and handle/arm rest, now that i look at them closer. Quote Link to comment Share on other sites More sharing options...
Larryz 260 Posted October 28, 2015 Share Posted October 28, 2015 I like the way that looks, but I would like the door handle be like the 260/280 type with the oh crap handle built in it Quote Link to comment Share on other sites More sharing options...
Rayven14 Posted October 29, 2015 Share Posted October 29, 2015 Hmmmm I don't think the handles or the upper door panel is "Real" carbon. I've been laying this stuff for 14 years and I can tell you from experience that your not going to get a real carbon handle for that price. The manufacturing cost to produce a multi piece mold to create that handle would be stupid expensive ... not to mention the time it would take to get it properly laid up. Not knocking his product, his sh** is NOICE! I just don't believe its real carbon. Quote Link to comment Share on other sites More sharing options...
antivenom Posted October 30, 2015 Share Posted October 30, 2015 going back for the third super anal inspection of the photos, it actually looks like 4d CF vinyl. something like this. http://i.imgur.com/3pyVSyc.jpg thoughts? Quote Link to comment Share on other sites More sharing options...
Rayven14 Posted November 3, 2015 Share Posted November 3, 2015 Exactly! I have a cracker jack load of this stuff laying around. Quote Link to comment Share on other sites More sharing options...
docaam Posted December 1, 2015 Share Posted December 1, 2015 Came across this on facebook today, one of the nicest I have seen so far. Very tasteful. Thanks came out great carbon signal plans to release their 240z line after SEMA. their prices are generally reasonable, at least for Z34 stuff, but the trick is that everything is pretty much group buy since they are in saudi arabia, (or abu dhabi, can´t recall which). i personally want everything i´ve seen in the fuguZ build so far, at least as it relates to the interior. so sign me up for the first GB. We in Dubai UAE (www.carbonsignalauto.com) pics and details mainly on FB page Carbonsignal1 We have soft released it quoting prices case by case Hmmmm I don't think the handles or the upper door panel is "Real" carbon. I've been laying this stuff for 14 years and I can tell you from experience that your not going to get a real carbon handle for that price. The manufacturing cost to produce a multi piece mold to create that handle would be stupid expensive ... not to mention the time it would take to get it properly laid up. Not knocking his product, his sh** is NOICE! I just don't believe its real carbon. It is actually but without autoclave just normal vacuum Hmmmm I don't think the handles or the upper door panel is "Real" carbon. I've been laying this stuff for 14 years and I can tell you from experience that your not going to get a real carbon handle for that price. The manufacturing cost to produce a multi piece mold to create that handle would be stupid expensive ... not to mention the time it would take to get it properly laid up. Not knocking his product, his sh** is NOICE! I just don't believe its real carbon. Ok guys been on this forum for past few years so some might know me, did similar interior for my Z as well minus some parts via my company Carbonsignal at that time were not that much into S30 and other cars but did few Zs and skylines, Greddy and Sung Kang liked the idea of what we do so they sent us whole interior to redo it in the beginning. When we got the parts they were shot and kind of beyond repair. We then made mold of each and every part and replicate in FRP/CF wrapped in Nappa leather and Alcantara. We did the whole new dash using stock metal frame, door panels are two pieces needed more work but wanted to keep close to OEM finish, upper part is in Carbon lower was wrapped, door handles, center Vent pieces removed the fan controllers and customized three holes for gauges, redid the center console as well again deleted some parts but kept the ashtray. Major part was to do the seats as most of all replica seats available are very small these are wider and can accommodate normal/taller people as well. I need to check with admins if they will allow us as vendors we can start offering these and currently doing whole interior for a 280z as well along with lots of exterior parts which we have. Some pictures more will post in a dedicated thread. Quote Link to comment Share on other sites More sharing options...
Poundz9oh9 Posted December 1, 2015 Share Posted December 1, 2015 Oh my! Just what we've been needing! Drooling Quote Link to comment Share on other sites More sharing options...
DREW RBZ Posted December 2, 2015 Share Posted December 2, 2015 Oh my! Just what we've been needing! Drooling Absolutely! I would be very interested Quote Link to comment Share on other sites More sharing options...
Tbcrow Posted December 2, 2015 Share Posted December 2, 2015 That dash is too good. Quote Link to comment Share on other sites More sharing options...
docaam Posted December 3, 2015 Share Posted December 3, 2015 Need to check what's the process to post as vendors can take it from there. Will have a nice big range of z items with quality and fitment as biggest priority Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted December 3, 2015 Share Posted December 3, 2015 God I want that stuff but it probably cost more than my chassis restoration will lol. Quote Link to comment Share on other sites More sharing options...
gacksen Posted December 4, 2015 Share Posted December 4, 2015 the alcantara dash looks yummy ! Quote Link to comment Share on other sites More sharing options...
konradlip Posted December 5, 2015 Share Posted December 5, 2015 Im looking to get factory looking door panels from fiberglass Quote Link to comment Share on other sites More sharing options...
docaam Posted December 6, 2015 Share Posted December 6, 2015 will work out a thread in few days Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.