mutantZ Posted June 7, 2017 Share Posted June 7, 2017 PM sent Quote Link to comment Share on other sites More sharing options...
softopz Posted June 16, 2017 Author Share Posted June 16, 2017 Update AARANG harness fuse box and ECU Shipped a week ago ThatoneZ harness fuse box and ECU configured . Shipped last week BMAC This weekend will be done full harness with ECU DOOMED This weekend will be done full harness with ECU On the next batch of potential harness Cjewing AustinG Jhill So far everyone has ordered the Full harness + MS2 3.0 assembled / configured ECU the next guys that want the ECU I will go with the 3.57 assembled unit for a couple of reasons - Faster turn around time. It takes allot of time to assemble/test/jumper the 3.0 board. I also have 2x 240z I need to finish for summer hopefully ( I wish ) - 3.57 is machine built so less chance of a bad solder joint But mainly cause its faster. I didnt start the group buy to build ECU's. So far I built 5 and it takes allot of time from the actual Harness work I do. ThanksHussein Quote Link to comment Share on other sites More sharing options...
softopz Posted June 30, 2017 Author Share Posted June 30, 2017 (edited) Iam now an authorized MS vendor via Amp EFI/DIYautotune. Any products from DIY autotune I can sell. Any sale made through hbz will have a 2-5% donation to the forum ( varies from product to product ) the least I could do for the forum. Prices will be the same price as listed on DIY website and any warranties will still be covered. Also my plug and play harness will still be for sale here as well as more new efi products for hbz so be sure to keep following the progress. Edited July 19, 2017 by softopz 1 Quote Link to comment Share on other sites More sharing options...
eduardoyanez Posted August 5, 2017 Share Posted August 5, 2017 I messaged you Quote Link to comment Share on other sites More sharing options...
softopz Posted August 6, 2017 Author Share Posted August 6, 2017 Replied Anyone one to jump in with Eduardo? Quote Link to comment Share on other sites More sharing options...
justforkicks Posted August 11, 2017 Share Posted August 11, 2017 I think this may be what I am looking for, PM and we will see. Quote Link to comment Share on other sites More sharing options...
1vicissitude Posted August 14, 2017 Share Posted August 14, 2017 Recommendations for a ITB l28? I'd be interested in an ecu and harness setup, as complete as you can offer. Quote Link to comment Share on other sites More sharing options...
softopz Posted August 28, 2017 Author Share Posted August 28, 2017 As of now I'm not doing any harness's if anyone wants one let me know! Quote Link to comment Share on other sites More sharing options...
v01canic Posted September 8, 2017 Share Posted September 8, 2017 PM sent, thanks in advance and sorry for any horrible questions. Quote Link to comment Share on other sites More sharing options...
D9inger Posted September 9, 2017 Share Posted September 9, 2017 PM sent Quote Link to comment Share on other sites More sharing options...
KenZ Posted October 10, 2017 Share Posted October 10, 2017 Wanted to thank Softopz for an amazing job putting together the wiring harness for me. All the ends and wire shielding are top notch and super clean. He was a great guy to work with, especially since I'm such a noob asking him lots of questions, which he was great at answering and giving suggestions. It's thanks to members like him that helps keep our Datsun hobbies moving forward. I highly recommend anyone doing a Megasquirt upgrade to contact Softopz as he will definitely hook you up with a custom wire job that meets your needs. -Ken Quote Link to comment Share on other sites More sharing options...
D9inger Posted October 10, 2017 Share Posted October 10, 2017 3 hours ago, KenZ said: Wanted to thank Softopz for an amazing job................. He's building one for me now. So far communication has been great. Looking forward to getting it installed... when I have the L28ET ready. Dave Quote Link to comment Share on other sites More sharing options...
softopz Posted October 11, 2017 Author Share Posted October 11, 2017 (edited) Thanks guys appreciate the kind words. More good news It's never been a better time to convert to Megasquirt with my harness/ecu kits. I have now partnered with Richard Boyk aka Chickenman to provide a better baseline tune for the individuals who are getting an ECU with harness. We will cover turbo and NA tunes ie l28et 260cc injectors /440cc/480cc also we will cover NA tunes as well. All software/tune config proceeds will go to chickenman for his work. Disclaimer part these are all baseline tunes that are very refined however not every setup is identical, elevation, temperature, EMI, wires/ plugs etc with that said....We do HIGHLY recommend a wideband and atleast a street/dyno tune also Richard could go over your setup remotely for more minor touches. He has done this with many board/facebook users to fine tune each setup his fees are reasonable and a very good insurance policy. Edited October 11, 2017 by softopz Quote Link to comment Share on other sites More sharing options...
madkaw Posted October 11, 2017 Share Posted October 11, 2017 Sounds like a good TEAM! I can vouch for Richards work . Richard is a great tutor to help you get over the learning curve with MS. So if you guys have ever considered switching to MS - this is a good time and team to do it with! Quote Link to comment Share on other sites More sharing options...
RefreshRate Posted November 3, 2017 Share Posted November 3, 2017 PM sent! Quote Link to comment Share on other sites More sharing options...
rjp280 Posted November 12, 2017 Share Posted November 12, 2017 Pm sent Quote Link to comment Share on other sites More sharing options...
madkaw Posted November 14, 2017 Share Posted November 14, 2017 Not trying to be a moderator here, but can this thread be rewritten in the vendor forum or here so it makes a little easier decifering ? Or if the original post can be edited . I was reading it today for someone who wants to order , and it was kind of hard to follow . Thanks Quote Link to comment Share on other sites More sharing options...
D9inger Posted November 14, 2017 Share Posted November 14, 2017 I received my MS harness from Hussein (Softopz) and couldn't be more impressed. I haven't had the chance to do a thorough inspection because of family issues but the product and communication so far has been second to none. He sent me pictures of my harness identifying all of the connections along with instructions for initial setup and flashing the data to my MS. I'll add more details when this roller coaster of life calms down. Dave PS I'm a grandfather! Quote Link to comment Share on other sites More sharing options...
softopz Posted December 8, 2017 Author Share Posted December 8, 2017 Your right I am going to make a new thread in the vendor forum and clean it up! Quote Link to comment Share on other sites More sharing options...
softopz Posted December 10, 2017 Author Share Posted December 10, 2017 MODS PLEASE CLOSE Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.