binsayer Posted October 13, 2006 Share Posted October 13, 2006 where can i find a good deal on balenced and ready forged pistons for my turbo engine zcarparts and racetep have them but they are a bit highly priced i think please advice me Quote Link to comment Share on other sites More sharing options...
jnjdragracing Posted October 13, 2006 Share Posted October 13, 2006 I am not sure where to get what you want. When I have my assembly balanced, they need the crank, rods and pistons. So I would get the best deal I could on the forged pistons. Take the rotating assembly to a good machine shop and have then balance it for you. I guess a 6 cylinder is done the same way as a V8. John Quote Link to comment Share on other sites More sharing options...
cpt jack Posted October 18, 2006 Share Posted October 18, 2006 Check out thezstore.com they have everything u could possably want! Quote Link to comment Share on other sites More sharing options...
big-phil Posted October 19, 2006 Share Posted October 19, 2006 Check out thezstore.com they have everything u could possably want! They don't have turbo forged pistons. Quote Link to comment Share on other sites More sharing options...
flames_187 Posted October 20, 2006 Share Posted October 20, 2006 I am not sure where to get what you want. When I have my assembly balanced, they need the crank, rods and pistons. So I would get the best deal I could on the forged pistons. Take the rotating assembly to a good machine shop and have then balance it for you. I guess a 6 cylinder is done the same way as a V8. John dont mean to hyjack the thread but how much do u plan on paying for your balancing and rebuilding(if u did )????... thanks -jr and most people get custom forged pistons from arias,ross or JE...anyone up for a groupbuy! Quote Link to comment Share on other sites More sharing options...
cpt jack Posted October 21, 2006 Share Posted October 21, 2006 dont mean to hyjack the thread but how much do u plan on paying for your balancing and rebuilding(if u did )????...thanks -jr and most people get custom forged pistons from arias,ross or JE...anyone up for a groupbuy! im kinda intrested cuz im about to build my self a nice turbo block.... Quote Link to comment Share on other sites More sharing options...
slownrusty Posted October 21, 2006 Share Posted October 21, 2006 Why don't you guys call JE Pistons? They can build any custom piston for you? ALso Wiseco will do the same. My co-worker just had four JE Forged pistons made for this thing, I $hit you not and it was not all that expesnsive: Yasin Quote Link to comment Share on other sites More sharing options...
flames_187 Posted October 21, 2006 Share Posted October 21, 2006 does anyone have a contact person for JE or any of the other piston companies...i rather talk to someone that is familar with our cars.. Quote Link to comment Share on other sites More sharing options...
Cal Poly Zmanaustin Posted October 21, 2006 Share Posted October 21, 2006 Why don't you guys call JE Pistons? They can build any custom piston for you? ALso Wiseco will do the same. My co-worker just had four JE Forged pistons made for this thing, I $hit you not and it was not all that expesnsive: Yasin Hey Yasin, What does that thing do the 1/4 in? Quote Link to comment Share on other sites More sharing options...
JMortensen Posted October 21, 2006 Share Posted October 21, 2006 There were a couple threads a while back where guys were ordering Ross pistons from Summit racing with pins rings and clips for $463 I think it was. They just ordered custom pistons and provided all the specs. Quote Link to comment Share on other sites More sharing options...
vegasnative Posted October 21, 2006 Share Posted October 21, 2006 group buy or or specs on the summit buy ie; part #s would be very helpfull also 240 9mm rods building turbo storker Quote Link to comment Share on other sites More sharing options...
Guest Pete1978Z Posted October 21, 2006 Share Posted October 21, 2006 Ready for a set myself for an L28ET. About 8.3:1 stock crank & rods Quote Link to comment Share on other sites More sharing options...
slownrusty Posted October 22, 2006 Share Posted October 22, 2006 Hey Yasin,What does that thing do the 1/4 in? A couple of weeks! LOL...the intent is to eventually turbocharge it...who knows when that will happen! Yasin Quote Link to comment Share on other sites More sharing options...
rztmartini Posted October 22, 2006 Share Posted October 22, 2006 I would also like some info on a contact for some forged pistons...group buy would be nice! Quote Link to comment Share on other sites More sharing options...
Cody 82 ZXT Posted October 22, 2006 Share Posted October 22, 2006 Yasin I had a customer come in with one of these about a year ago. Just about emptied my store from all the people that went out to ask questions. Quote Link to comment Share on other sites More sharing options...
slownrusty Posted October 22, 2006 Share Posted October 22, 2006 Cody - And people think that Porsches, Ferraris and Lambos get attention. Trying cruising down the Interstate in that thing, people rubber neck like crazy! I did just about 70mp/h in that Pinzgauer and I am sure a few folks were thinking what the hell does that thing have in it. Pretty funny, good thingI did not have to stop quickly...4 wheel drum brakes! My buddy who owns it, has to let the air out of the tires to get it into his garage, as it stands so tall...LOL The thing is freaking trip. Yasin Quote Link to comment Share on other sites More sharing options...
Clifton Posted October 23, 2006 Share Posted October 23, 2006 http://arizonazcar.com/piston.html Quote Link to comment Share on other sites More sharing options...
big-phil Posted October 24, 2006 Share Posted October 24, 2006 http://arizonazcar.com/piston.html Clifton, would those pistons work with a turbo? Or do I need dished? Quote Link to comment Share on other sites More sharing options...
JMortensen Posted October 24, 2006 Share Posted October 24, 2006 Keep in mind those AZC pistons fit L24 rods. Probably a worthwhile upgrade, but that's another part to buy, and you'll want the 9mm bolt version of the L24 rod, then resize, and use ARP bolts... Quote Link to comment Share on other sites More sharing options...
Guest Pete1978Z Posted October 24, 2006 Share Posted October 24, 2006 http://forums.hybridz.org/showthread.php?t=102967 Found this via search. Thinking basic NA flat top compression with an HKS 2MM head gasket. I just might call Summit this week & see what they say Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.