hoov100
-
Posts
1503 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Everything posted by hoov100
-
Short answer: No, long answer is you need to try and find the answer to your question, before you ask. (cudo's for getting it in the correct forum though)
-
Forgot about that.
-
Permanent mounting of Autometer gauges
hoov100 replied to MazterDizazter's topic in S30 Series - 240z, 260z, 280z
[/img] although i completely rewired my car from scratch, so it made it a little easier. -
It's a 240 with early 260z door panels and a 280z steering wheel. (for the new guys)
-
Is it possible to make my 280zx an AWD car?
hoov100 replied to sanders8800's topic in S130 Series - 280ZX
make a custom frame, so that the subbie's suspension and driveline will bolt in, then modify the s130's body to accept it! -
Okay?
-
-
heres some info, but the senders for them are fairly expensive. http://www.gaugeguys.com/Smiths/classic.htm
-
Any chance you could email those to me? pretty please with a cherry on top? (Hoov100@gmail.com)
-
hardware store.
-
You've got alot of reading to do. The reason you would replace factory gauges, is to be more accurate and precise. If you like that style of gauge, I would check VDO and stewart warner.
-
measure them up do some math, its most likely gonna be 1.5 coils. Just save up for a set of good lowering springs and if the stock springs are in that good of shape, sell them.
-
seems simple enough to me.
-
I had the same problem when i tried to sell mine, everyone talked the talk, but nobody had the walk or the cash in hand.
-
If its only spot welded on, I moved my battery to the trunk and dont need my battery tray.
-
lol, still in the high 80's and sunny here.. we dont get snow, rain or ice down here, just sand storms, wind and it drops into the high 30's. max. rust is almost non existent in this part of cali.
-
why not an AWD g35?
-
Those are beautiful!
-
240sx tranny in 280zx-can I use stock driveshaft?
hoov100 replied to nosebleedZ's topic in Drivetrain
I'm pretty sure the 240sx uses a different yoke. Getting a driveshaft made isnt very expensive if you have the yokes and u-joints. -
Woot, got my taurus fan on a switch with fuses and relays!
-
-
so that 1% kept me from going..
-
You could use that, or a regular 3 position switch for the signals and a 2 position switch for the hazards. I'm almost done completely rewiring my car from scratch and thats what i did.
-
So tomorrow their is a 99% chance That i am going to ride my R1 to vegas!!!
How the heck are ya?