vegasnative

from what i have read if you do assemble the engine yourself take the engine to have the the whole engine to a machine shop to have the rotating mass balanced from front pully to flywheel

Im in the proces of puting together a stroker turbo motor , and the way i saved some money on the cost was i went around to most of the engine builders in my area and talked to them about me supplling most of the parts myself.of course some said no but i did find some that would.so the machine shop supplied pistons[forged je] bearings,gaskets[very good price] my cost for a fully asembled engine and balenced[lighten flywheel and ati dampner instaled] was 2300 dollars. so total i have about 5000 dollars into engine before install into my 72

my bad! seemed too easy

yea look at the shipping cost first clue to an ebay ripoff

yea why is canadian exchange rate shown in the add

what octane our you going to run?

what year did steering lock come into play with nissan

[ I don't see where a 25 mph impact (at most; watch the damn traffic...) would do too much. well somebody it my truck doing less 25mph and the repair bill was over 4000 dollars

very good ebayer.

im pretty familar with the amherst, williamsville area.as my mom and family have lived their for over 50 years, and i lived their for a couple years after college and i go back every year

sorry to hijack but did sal leave msa?

i read the other day that nascar teams are having trouble getting rid of their cars because of the switch to the cot [car of tomarrow]umm!!

that fiat thing looks like the top of one car slaped on the bottom of another by some meth tweaker

amc pacer

matt is salesman, jon is a racer!!!

im in the upper brackets so thats good but not being married or have any kids i get taxed to death must find more deductions!!!

rookies!!!

ross piston and rings 88mm 750.00,felpro gasket set 48.15,rear main seal15.13,rod bearings 23.70,main bearings45.42 shipping 26.00 these are the parts that the machine shop provided.hot tank block 48.00,mag block12.00,bore block to 88mm144.00,surface block185.00,line bore45.00,shot peen and balance rods156.00,grind crank110.00,ass short block145.00,balance short block 165.00,port head500.00,valve job210.00,surface head65.00,port ex and intake man100.00 parts i suppyed cam kit 589.00,ati damper419.00flywheel 389.00 valves289.00block and head250.00,crank250.00,rods100.00non webed intake80.00

just got mine out the machine shop 2500 dollars.p90f54 88mm ross pistons,9mm rods,ld28 crank all arp bolts,ati damper,fidannza fly wheel,head ported ferria 1mm over size intake and exhaust stage3 cam kit,gasket matched intake and exhaust, all balanced8.5 to 1 will be turbo

check home depot online they have setups just for that problem stand alone unit that run off your home gas line . cost a little more 2000 and up but no worries 5 sec after power outage they start up. got one for my mother this summer ,she lives outside buffalo ny had no power for 7 days last winter,bad ice storm ,and dealing with the gas problem ,filling about every 8 hours for an old lady was not fun plus dealing with fumes depending on were you put it[outside always]

wow!!! so simple, but amazing!!!

mythbusters did this with a tissue box then of course went way overboard and i think did do a speaker box but the best was a hachet ,next day i did a check of my veh yea i moved some things

injected or blown?

yea my niece is about 17 going on 25 but anyhow i offerd my bro one of my 240s to him for is girl well he thought about it for awhile and decieded that was a little to much for here at the time well a year latter of dad can i borrow the car were talking again butt now he is talking about my 88 735i for her witch is probley best for her but i still realy enjoy the bmw may time to move up to a 98 saw one the other day on the side of the road

shifter carts will go under 4.0 in 0 to 60 not many things faster