Tim240z

Sent you a PM Tim

Anyone...no-one

So Owen....are you saing that your wife doesn't wear a Kimono, and you don't have a pair of Samurai swords......man my whole perception of you 'eastern folk' has just been obliterated!! Tim

I think that they are taking the exhaust tips a bit far.....pun intended!!

OMG!!!

Just about anything from mid 80s up

Looks good!! No the pan location is normal. You can use MS Paint to shrink your pictures....it's part of Windows, so you should have it.....Just open the picture in paint, click on "Image" on the toolbar, then select "Stretch/Skew" and then input the % of the original size that you want it shrunk to (60% will do). Remember to put 60 in both horizontal and verticle.....

What a squid... ha ha ha ha .....

I have always liked to put a thin smear of hylemar around the intake runners on both sides of the gasket, and a thin smear of silicone around the water jackets on both sides of each gasket.....not really necessary though....but I'm the paranoid type.....

Ha ha ha....that's car #3 that's had e-brake problems!!! Mike.....the car isn't bad luck....must be you....have you already forgotten all the problems with the green one.....it had you and pops at each other's throats!!!

Sit tight dude....I'm working on it......I haven't forgotten you!!! Tim

If so, and you don't mind doing me a fair sized favor, please drop me a PM... Thanks, Tim

Rufus, Let me know if you are flying into LAX....I live very close by.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43998&item=2477891818&rd=1 SPECIFICATIONS Capacity.................................4,850 lbs. Max.. Height from the Floor......68.5" Runways..............................18" Space Between Runways......33" Lifting Time..........................50 sec. Lowering Time...................30 sec. Max. Operation Press...... 2030 psi Motor...............1 HP Voltage: 115 VAC Overall Dimensions: 88" x 168" x 93" high Lift is in excellent condition! Works great! The LANZONI X2 SYSTEM certainly represents the solution to one of the biggest problems of modern society: "THE LACK OF PARKING SPACES" Bidders are encouraged to visit our facility to check out this excellent space saving lift first hand.... under power. More info here: http://www.lanzoni.com/tecniinx2.htm

Yeah, but a month from now it will be 100*F + I swear all you guys out there have sun damage to the brain!!

Absolutely uncalled for!! Dale, Looks like you have some crap in your lines and likely a bad master. Replace the master cylinder, but before you bolt it up, undo the flexible lines from the calipers/drums and blow with compressed air, through the entire system. Then bench bleed the master, install and bleed the system, starting with the fartherest wheel from the master (right rear). Do a search on 'bench bleeding' and 'bleeding brakes'.....then start learning. I would also recommend that you pick up a manual for your vehicle and read it cover to cover until you have at least a basic understanding of the different systems/components of the vehicle... Tim

I have a special running on wheel chocks....... Damn trees!!!

It's about 45 minutes in no traffic east of the coast line. There are a couple in that general area, I think, but the sane ones of us live closer to the shoreline!!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6315&item=2477342028&rd=1

Took this today from Chino Hills State park facing west towards the basin. This was at 08h30, so the low level ozone was just starting to build!! Great way to see the inversion layer over the city!!

It's likely very true!!!

That's perfect!! Make it the opening page everytime someone visits HZ!!!

Well, then we won't mention your illegal disposal of hazardous waste!! (batteries)

How are you venting that cell!!