RB26powered74zcar

I like it !!! Can you show how you modded the metal rim section that the actual 7" housing sets in (the part that has the beefy little spring hooked to it for tension) that's used for adjustment. My guess is all you have left is the outer edge....

Click on the pic and it will show "photo details" at the bottom, then look for " Admin Options " then choose " edit photo" and there is a delete option.

These are the two I have. I haven't had a chance to remove my twin set up yet so I can test fit one of these... T3 LoveFab T4 divided, Japan sourced They both have universal 25,26 flange

Yes, their all 30 yr old wiring....

That's the exact set up I ran for years before I did my retro fit with all OEM car components. Just be sure to run a headlight relay kit and they will be plenty bright...

100%. I'm scared shitless to go full pedal through the gears on the street in my Z.

That one is missing the most important part of a hid retrofit.... the projector housing.

A bit expensive in my opinion, but here is a fairly PnP hid kit > http://cgi.ebay.com/ebaymotors/PAIR-BI-XENON-7-HID-PROJECTOR-LAMPS-H6024-X6024-6024_W0QQcmdZViewItemQQcategoryZ36476QQihZ027QQitemZ400017490134QQrdZ1QQsspagenameZWDVW

Thanks for that! That has to be the ultimate ride there...

The one guy driving along legal, minding his own business, other guy hangs a U turn right in front of him, he avoids U turn car by crossing into oncoming cars, or slams the curb and going up into other persons yard (now his car is jacked), U turn driver waves thank you and drives off... Thats my luck...

Except for flying a airplane, thats my life story in a nutshell...

eBay has 1" 4 lug adaptors for around $89 a pair...

I've seen these advertised on the RB forums; #2667 BKR7EIX #2668 BKR8EIX NGK Racing plug #4899 R7436-9 $41.52ea. 6@ $249.12 BCPR8ES as a common street plug with 0.7 to 0.8 gap.

Watch this L6 go boom... http://www.garaget.org/video/l4npnhm405ll

We have a kicka$$ female Z'r member here. She isn't into "RB's", but is deep into the Z cars. Here name is Donna, from Calif.

I will be installing/using it outside on my slab in front of shop.

I think I'm going to get this one. http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200358064_200358064 I'll just put it on their CC they invited me to apply for. The only bitch is it cost $475 to ship it to me... EDIT: I just purchased this lift (backordered though) and after I completed the deal, I notice that they have a few stores through out the US, so I see one in Houston (150mi from me) and slap myself up side my head for not thinking of this first, before paying $447.00 for shipping, that I could just will call it... I emailed them to see what they say about it.... we'll see...

Good point!

You ideally want the inlet/outlet on the same side (right hand side).

1/2 a century huh..... edit: sorry I read the wrong age... Happy Birthday