Jump to content
HybridZ

RB26powered74zcar

Super Moderators
 View Profile  See their activity

  • Posts

    4651

  • Joined

  • Last visited

  • Days Won

    23

 Content Type 

Everything posted by RB26powered74zcar

  1. RB26powered74zcar
    Sell me the hood scoop, that will help you some what... you don't need that ugly thing...
  2. RB26powered74zcar
    Looks like he even used the Z coil springs...lol I like it... and would cruise it (very carefully though).
  3. RB26powered74zcar
    Hey Russ, good to see you drop in... thanks again for all your help and expertise you gave me. How's your RB26Z coming along?
  4. RB26powered74zcar
    That's the approach I'd take on this now if I were doing it again.
  5. RB26powered74zcar
    I have six of those new oem pigtails for the Z32 injs. I bought them back when I was gathering up all the needed stuff for my standalone swap, and made a mistake buying these. They didn't fit on my non Z32 inj's. I paid close to $30 apiece, but will give you a sweet deal if you want to use oem replacement pigtails... LMK...
  6. RB26powered74zcar
    Looks real good. You did a nice and clean update on it...
  7. RB26powered74zcar
    Just don't drink the water.... lol Seriously.... have a ball down there...
  8. RB26powered74zcar
    $2.19 L.C. La.
  9. RB26powered74zcar
    I like the wheels BobbyC. What are they
  10. RB26powered74zcar
    I know it's seems hard to do, but try and relax. I think you'll be ok with this. It prolly didn't damage anything real bad (unless it was raised up to load and dropped). Clean everything up and take inventory on everything, as far as broken pieces. Take a bunch of pics before cleaning, and removing. Again, try and take this one step at a time, you'll make it thru this...
  11. RB26powered74zcar
    I have a mint set of complete hard lines for the oem rb26 twins, water and oil. Let me know if you end up needing to purchase a set.
  12. RB26powered74zcar
    Wish I could offer you some help with this Dave... after all the tons of tech help you donated to the site for the wiper motor fix, and the other write ups. Someone here will prolly answer up sooner or later....
  13. RB26powered74zcar
    Sweet panels Mark!! Interested in the price for a pair....
  14. RB26powered74zcar
    They look great but would look better if they were put on in the right L & R order. They are mixed in this pic...
  15. RB26powered74zcar
    Oh, ok. I read it wrong then... thanks j.
  16. RB26powered74zcar
    Let me know if you want to unload that rb26 trans that you can't use. PM me if interested... thanks
  17. RB26powered74zcar
    Rear block freeze plug maybe...?
  18. RB26powered74zcar
    Nice Tim!! I'd be jazzed with those results.
  19. RB26powered74zcar
    I think they are meant to lean to the exhaust side. Here is mine:
  20. RB26powered74zcar
    I used one for a couple daily driven years on my last L6 turbo stroker/zx 5 spd. Never had a issue. I did put a dab of Valvoline Synth grease on the needle bearings first though...
  21. RB26powered74zcar
    Looks cool.... what kind of car is that picture taken from? Looks different than a 240z to me....
  22. RB26powered74zcar
    Yea, heres another use of stock holes..
  23. RB26powered74zcar
    Did you order the one Andy is using? *Edit* never mind, I got the company mixed up...
  24. RB26powered74zcar
    To heck with that, if that were me .... I'd already be locked up after snapping both his femur bones with a bat....
  25. RB26powered74zcar
    I think what your talking about is shown on the part JSM posted. The threaded in pipe fitting is part of the heater hose set up if I remember correctly. You should be able to reuse yours, or Jeff may be nice enough to include that piece...
×
×
  • Create New...