Jump to content
HybridZ

milesz

Members
 View Profile  See their activity

  • Posts

    168

  • Joined

  • Last visited

 Content Type 

Everything posted by milesz

  1. milesz
    Check this out: https://www.thirdgen.org/forums/transmissions-drivetrain/373666-viper-t56-vss-wires.html
  2. milesz
    Do you have any pictures you can share? What clutch set up did you use? Thanks for the information.
  3. milesz
    One more question, if I stay with the Viper mid-plate, what slave cylinder do I need to get? Can I used any Dodge slave cylinder is only from a Viper?
  4. milesz
    Thanks, that's great information.
  5. milesz
    What year bellhousing and input shaft? Did you use corvet or camaro input shaft and bellhousing?
  6. milesz
    I have a friend that just wrecked his Viper and asked me if I was still interested in a t56. I can get it at a good price but wondering what it will take to get it to work in my 73 240z with a 5.3 LS motor. Right now it's an automatic transmission. I was hoping one of you guys had some experience you can share. Thanks on advance,
  7. milesz
    I replaced the rack and pinion, strut mount insulators and strut bearings. That improved the shaking but it still shakes just not as much. Any ideas why its still shakes? Thanks in advance,
  8. milesz
    I replaced the rack and pinion, strut mount insulators and strut bearings. That improved the shaking but it still shakes just not as much. Any ideas why its still shakes? Thanks in advance,
  9. milesz
    Interested in the engine wiring harness, please send pic to milesj64@hotmail.com
  10. milesz

    I'm using the Toyota 4x4 rear brake on the front of my 73 240z.  I understand you are using them for the rear.  If you can call me at 661-910-5467 that would be great.

     

    Thanks in advance

  11. milesz

    If you can call me at 661-910-5467 that would be great.

     

    Thanks in advance

  12. milesz
    I am interested in your NV3500 5 speed. I am planning on going manual and was thinking about the t56 but for the cost, the s10 tranny is looking pretty good. Do you have any more info on what parts as needed (I have the 5.3) or did you do a right up?
  13. milesz
    Guys, I know it's on here somewhere but I have not found it. I need a parts list for swapping out the 4l60e to a t56 in my 73 240z with 5.3 engine. Can anyone point me in the right direction? Thanks in advance
  14. milesz
    still have it?
  15. milesz
    I have a 240z and trying to install the Pivot Illumi Starter. I know the red wire goes to the red/ white wire (12v power); the black wire is ground; one blue wire I hooked to the black/yellow wire and the other blue wire I have hooked to the black/blue wire. When I turn the key to the on position, the switch does does illuminate. It illuminates when I press it but it will not start the car. What did I do wrong?
  16. milesz
    Thanks to everyone for all of this good advice. I am going to try the push start switch of Ebay and by pass the old wiring. Update!! I purchased a cheap push button switch off Ebay and now it starts fine. I had to run a wire from the starter to the push button switch.
  17. milesz
    Thanks I will try it.
  18. milesz
    That is true, I need to learn how to troubleshoot. First, no clicking sound; I check the battery and it's fine; the car cranked an ran 2 weeks ago; lastly, I am not sure how to check the voltage at the starter.
  19. milesz
    Ok, I'll do it.
  20. milesz
    I have a 73 240z with 5.3 and the car wont start. When I turn the ignition on, I can hear the fuel pump turn on but wont start. No click, click, click when trying to turn it on. I check the fuses and wires and all looks fine to me. I also checked the fuse in the fuse box and all is well. Any suggestions??/ Thanks in advance
  21. milesz
    Ok, I could really benefit from a conversation with you. Please give me a call at 661 910-5467. I am having trouble mounting the fan shroud.
  22. milesz
    What lower radiator hose did you use or did you get the radiator with the straight lower pipe.
  23. milesz
    I am thinking about buying one for my 1973 240z ls1. I like the price (129.00 new on Ebay) but want another opinion before I purchase. Thanks
  24. milesz
    Thanks for the pictures. Where did you get that fan shroud? Its looks very nice.
  25. milesz
    Can you share with me some pictures of how it looks?
×
×
  • Create New...