Jump to content
HybridZ

fl327

Members
  • Posts

    3199
  • Joined

  • Last visited

Everything posted by fl327

  1. Yo, Attarco in san jose was having a sale on vh45de complete long blocks, 500.00 low miles. Its a awesome price that comes with a warranty. THis was a few weeks back but these motors are not big sellers I guess.
  2. If I can get ten or more heads to do it, I can set up a dyno day for relatively cheap price at Racetune in Hayward, California. We will be throwing a BBQ and gambling on all of your dyno results, 1.00 a person gets you in. Obligatory alcholic beverages will also be served, as well as tons of meat. Several Nismobb cars will be there, mostly of the s13/14 drift division. It would be 60.00 per person if I can get at least 10, for a pull with a/f, and a free lunch made by people who love to eat. If I can get at least ten dedicated to going, people from the crowd can also dyno their cars for the same price.
  3. Currently running an extremely overbuilt setup. L28et engine at stock boost with every fuel component upgraded and harness DVOM'ed and soldered, 3" exh, 60mm full ported intake, 3.70lsd, cv axles, and 240sx disk brakes. About 175rwhp. 200ft. I do run a great tune with as much timing as I could get on the dyno and stay together, at 6.5 psi you can run a lot, car runs STRONG, but it is at stock boost. It also doesnt hurt that Im a vet behind the wheel of an S30. 1. Compressor SLK pulls up to me at a light, and says "Sounds like you got a motor in there" Me: "Lets GO!!!!!" Him: "Hell Yeah" (he was an older yuppie but actually turned out to be cool) I dont launch the car, and easily grab a car out the gate and pull on him in second and slow down. He begs for more at the next light and my friends are behind me giving me the green light. Hold rpms between 2600-3000, launching at full boost with the posi, I squat, drop, posi up and just DROP the Compressor like hes standing STILL!!!!!!! My friends pulled up to him right after and started talking to him and he said" "He rolled me up and smoked me, I aint gonna lie" Good man. 2. Porsche Boxter. Yuppie#2 I see him three blocks after I stomped out the compressor, and hes got his top down driving like a maniac. I catch him at the light and he just starts reving his motor up like a madman. I openly challenge him, and he looks away and starts looking at the lights. Ok, lets hand him his ass too is what Im thinking. Same deal, launch at full boost and blow him away, yuppies cant drag launch I guess. By the time he hits second, ive given up the notion that this boxter is a contender for anything more than 2nd place. At the next light he does what I think he is going to do, look away like nothing happened, like his precious status symbol didnt get STOMPED by a 30 year old unrestored car thats oh so beautiful. $75,000 dollars worth of kill in 2 races, its enough to make every hour ive spent greasy, every time Ive broke skin, everytime Ive broke down, every dollar Ive spent, SO Motherfrekin gosh DAMN WORTH IT.
  4. Call this man 415 726-8889 Warren. He, unlike most body shops these days, knows what a z is supposed to look like, and he will work with a budget. Bring up the zcar, he will know who sent you most likely.
  5. Definitely looks like it will be a tight fit in the s130, in the s30 with an NA trans you can go a little more hardcore. What is prefered material, I can have them made in normal exhaust steel material, or ss if prefered. I can set them up for 4bolt t3 or t04e, 4bolt t3 is standard any other flange will be a little extra. I am going to try to set them up so all that will be needed after installation is a straight shot 3" pipe. We are also working on cheaper downpipes for SR20det in S13, and a one off for sr20det in a zcar. Ive seen 20hp increases with smaller downpipes. Sure 3" is overkill, but Im all about overkill. s130 and s30 pipes will be available at the same time, early next year. Anyone interested in a torque arm for L series powered zcars? I am dreaming up a torque arm as we speak.
  6. What I did was swap everything out to the more common 70-3, and 76-8 driveshaft and flange combo. 75s uniqueness makes them a little harder to replace quickly, changing stuff out to the more common flanges gives me more choice in finding good used driveshafts, since you will have 7 years of interchangability vs. 1.
  7. You can get one of those kits on line that has different sizes of silicone hoses, make sure its not the thin walled hoses though, I tried using those once and had flat vacum hoses everywhere.
  8. all interested should pm me please.
  9. you should look and compare flanges before you do the hard stuff. if your car has the original diff and driveshaft, NO.
  10. man I ever break all my nissan trannies im skipping od all the way and getting me a super t10, and Imma bang gears like a man!
  11. not sure, what i did was cut mine off and went to the store and matched them up, pretty easy and didnt cost overly much.
  12. IF you have the stock 75 driveshaft, you will need the 76-8 driveshaft to use the 3.9 diff, or change flanges. problem is, 75-8 driveshafts are not rebuildable easily, so you pretty have to change the driveshaft. The stock 75 driveshaft flange is bigger and uses bigger bolts, and is the same flange as a 81-83 turbo diff flange. When I put my z31 LSD in, I had to change the flange to the more common type and use a 76-8 driveshaft, actually they are the same from 70-74, and 76-8. I picked up a spare driveshaft from a 72 and will put good ujoints in it for when I blow this one up from clutch kicking my car sideways.
  13. Yes, stock dp is a joke. very thick walled I doubt its even 2.25 ID. Exhaust side shoots straight into a wall the 90 is so short. The Downpipes will be available through my Crews website, which will be up by early next year. We are currently in the prototype phase and will be offering two different downpipes, one that fits in the s130 chassis and one that fits in the s30 with l28et conversion. We may also be offering turbo headers with t4 and ex wg flange for L28et based on the one thats being designed for my car.
  14. Ill be making one soon that fits z and zx, 3"
  15. Good job. You got 2 years of torture out of it, thats good I think.
  16. I have the older version thats bigger, and has more room inside for hybridization
  17. If growing up means that you accept responsibility and take charge of your life, I have. On3go, please pm me, I have a promotions package getting ready for you.
  18. You do have to do whats right by you Mike. Life is a dog eat dog world, and Im a pitbull with rabies homie. I learned what makes me wake up in the morning, and its made me love life that much more.
  19. Edit your profile, you are now NISMOBB Texas Chapter CEO, S30 BOSS (70-78) You now need to organize your crew. You need a guy to BOSS s130 and another for s13. If you end up owning those cars you may appoint yourself if you can handle the small responsibilities. Any other nissan that you wish to include must be led by someone that owns that particular model, a z31 guy for z31 members and so forth. Now build up your squad, PARTNER. You are now part of a crew that represents the new and upcoming generation of Z owners..
  20. I just got off the phone with Mr. Costa a while back. Hes in my gang now too, are you?
  21. You have to think positive homie. Theres nothing you cant do if you just TRY. I dont care what anyone says, Ive proven it to myself. Ive turned from broke ugly duck to a full time city slicker handsome playboy by becoming a positive thinker and using every skill ive ever learned and seen into ACTION, seeing the sucess of doing so has given me the confidence to do things ive never thought possible, I put in 60 hours a week working using all these skills in tandem and its given me the confidence that women can smell. Ive lost 15lbs just from getting off my once lazy butt and getting down and hustling for whats mine. My hustle doesnt break the law anymore and my relationship with my family is better than ever. I started my own company and I still do sidejob high performance mechanical work until my back makes noises. Im going out with a beautiful woman tonite, and another one tommorow, People think Im a gangster and want to discredit every thing I say? I AM A GANGSTER......my definition of gangster is a person who takes his life into his own hands and makes things happen for the one person who can make his life the way he wants---himself...the side effects are increased self esteem and a higher sense of self worth, and the MONEY is GOOD TOO... Mike, your one of my favorites on this site and Im just trying to light a fire under your ass to go out and achieve homie... I wish I had someone to do this for me, I had to fire up my own stuff, but I AM ON FIRE AND I CANT BE STOPPED
  22. Alex, Ever contemplate that hes talking to you like that because he's responsible for doing a good job and wants to do a good job? He could be a prick too I wont leave that option out, but on the other hand, I know a lot of guys that talk the same way, not because they are mean or disrespectful-they are all business and busy people with lives and families, if they acted any way people would step all over them. This is my take on it and I could be wrong, since I am not the one.
×
×
  • Create New...