ozzinc Posted August 31, 2012 Share Posted August 31, 2012 Does anyone know whats going on with zforce productions im looking for some real wide flares that will cover my 17x11" wheels and the Bamf flares where the only flares that I knew would probably cover this wide wheel as well as needing some flares for my front 17x9" wheels, I dont care if I have to order them from overseas. Quote Link to comment Share on other sites More sharing options...
madkaw Posted August 31, 2012 Share Posted August 31, 2012 Check out RHDJAPAN. They sell extra wide rear flares, and their quality is supposed to be excellent. Quote Link to comment Share on other sites More sharing options...
Distortion Posted August 31, 2012 Share Posted August 31, 2012 Flares These may do the trick Quote Link to comment Share on other sites More sharing options...
DevilZX Posted September 2, 2012 Share Posted September 2, 2012 Or you could try here. My link Quote Link to comment Share on other sites More sharing options...
RB26powered74zcar Posted September 2, 2012 Share Posted September 2, 2012 Or you could try here. My link Same person / ph # as in post above you... Quote Link to comment Share on other sites More sharing options...
ozzinc Posted September 2, 2012 Author Share Posted September 2, 2012 Thanks for the link DevilZ and R26 but I don't think they will be wide enough because I have a 6" lip with a 5" backspace, I like the flares because all I have to do is some trimming at the wheel well and slap the flares on, but i just don't think they will be wide enough, the flares that i used on my other 240z where from reaction research and they fit perfectly but they are the whole quarter panel and i had to mold them in and its a project and I would have to paint the whole rear quarters vs the link that you showed me the flares for $350.00 I will post some photos of the wheel and the previous z that I had them on Quote Link to comment Share on other sites More sharing options...
ozzinc Posted September 2, 2012 Author Share Posted September 2, 2012 here is a photo of the wheel and rear quarter flare that did the coverage over the wheel and it's a 17x11" 6" lip with a 5" backspace Quote Link to comment Share on other sites More sharing options...
stony Posted September 2, 2012 Share Posted September 2, 2012 Thanks for the link DevilZ and R26 but I don't think they will be wide enough because I have a 6" lip with a 5" backspace, I like the flares because all I have to do is some trimming at the wheel well and slap the flares on, but i just don't think they will be wide enough, the flares that i used on my other 240z where from reaction research and they fit perfectly but they are the whole quarter panel and i had to mold them in and its a project and I would have to paint the whole rear quarters vs the link that you showed me the flares for $350.00 I will post some photos of the wheel and the previous z that I had them on Oscar, I sent you an email concerning the fiberglass overfenders you sent me. please respond asap. Quote Link to comment Share on other sites More sharing options...
CArFAn Posted September 2, 2012 Share Posted September 2, 2012 http://www.zforceproductions.com/ Quote Link to comment Share on other sites More sharing options...
Mikelly Posted September 2, 2012 Share Posted September 2, 2012 He's not always the fastest to respond, but he does get stuff out. Remember gang, Justin is doing low numbers production runs of this stuff. Takes a while to get enough orders to have them made. He is doing this out of pocket and doesnt' have a large overhead budget supporting his efforts. Love my BAMF Carbon fenders and rear taillight panel from him, BTW! Mike Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted September 2, 2012 Share Posted September 2, 2012 Yeah actually give him a call if you can. He is a really nice guy, but I still stand by the "if you don't have it on hand, I won't buy it". I'm never ordered anything from him that he couldn't ship out same day. And even then I could always just pick it up when I was in Cali. Quote Link to comment Share on other sites More sharing options...
ozzinc Posted September 3, 2012 Author Share Posted September 3, 2012 I had sent a email to Zforce productions about the availability of the Bamf flares but i did not receive a reply to my personal email address, and I dont have a contact number to call Quote Link to comment Share on other sites More sharing options...
Mikelly Posted September 3, 2012 Share Posted September 3, 2012 (edited) Contact number is on his website. You can also find him on Facebook under ZForce Productions. Mike Edited September 3, 2012 by Mikelly Quote Link to comment Share on other sites More sharing options...
GOTHALOSISM Posted September 3, 2012 Share Posted September 3, 2012 or AIM: s30zforce Yahoo IM: s30zforce Email: s30zforce@yahoo.com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.