Jump to content
HybridZ

78 RB26 260Z


Recommended Posts

  • 1 month later...
  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

Apologies for the photo sizing for the next few posts, I have now adjusted it for future posts. 
 
 
 
 
So, since I can't help with the body restoration (still waiting to get blasted anyhow) I've been doing what I can with the parts I have with me.
 
 
Starting with the starter:
 
IMG_6866.jpg
 
 
 
Then the propshaft, I thought this was going to be an easy job, but there was rust under the paint so I had to take it all back to bare metal:
 
IMG_6520.jpg
 
 
 
IMG_6519.jpg
 
 
 
IMG_6521.jpg
 
 
 
IMG_6525.jpg
 
 
 
IMG_6530.jpg
 
 
 
IMG_6531.jpg
 
 
 
IMG_6537.jpg
 
 
 
 
 
Thottle Pedal. Unlike the other items I decided to have this one powedercoated.
 
IMG_6861.jpg?t=1566317261
 
 
 
 
 
Going to be updating to this Honda wiper motor as the original one is a bit lame:
 
IMG_6822.jpg   
 
 
 
IMG_6823.jpg
 
I'm not putting something looking like that in my restored car though.
 
 
 
Thats better:
 
IMG_6832.jpg    
 
 
IMG_6830.jpg
 
 
 
 
 
Some parts only needed a clean:
 
IMG_6560.jpg
 
 
IMG_6561.jpg
Link to comment
Share on other sites

Apologies for the large photos, I have ajusted my settings for future uploads.
 
 
 
 
Next I turned my attention to the heater box:
 
 
IMG_6566.jpg
 
 
 
 
Radiator was looking a bit rusty and the foam around the core had disintegrated
 
 
IMG_6567.jpg
 
 
 
IMG_6568.jpg
 
 
 
 
IMG_6569.jpg
 
 
 
 
 
IMG_6574.jpg
 
 
 
 
 
IMG_6813.jpg
 
 
IMG_6826.jpg
 
 
 
 
IMG_6814.jpg IMG_6815.jpg
 
 
 
 
IMG_6839.jpg
 
 
 
 
IMG_6834.jpg
 
 
 
 
 
IMG_6848.jpg
 
 
IMG_6850.jpg
Link to comment
Share on other sites

Lastly it was on to the fan box. This was looking a bit sorry for itself.
 
 
IMG_6361.jpg
 
 
 
 
 
Took it apart:
 
 
IMG_6363.jpg
 
 
 
 
 
IMG_6377.jpg?t=1566319386
 
 
 
 
IMG_6365.jpg
 
 
 
 
IMG_6366.jpg
 
 
 
 
I cleaned all the parts up and removed all the old foam which had turned to powder
 
 
IMG_6379.jpg
 
 
 
 
IMG_6378.jpg
 
 
 
 
 
Sent some parts for blasting
 
 
IMG_6862.jpg
 
 
 
 
Primed them:
 
IMG_6864.jpg
 
 
 
 
Sprayed them, wasn't easy as the one on the right has lots of brackets, gaps, internal parts, edges and so on which all needed to be properly coated. Also for larger jobs like this I really need to get an air/water separator. A 300L compressor was planned as part of my garage extension but that hasn't happened yet so still working from a small one.
 
XPHW7726.jpg
 
 
 
 
 
Started reassembly:
 
IMG_6890.jpg
 
 
 
 
IMG_6891.jpg
 
 
 
 
IMG_6894.jpg
 
 
 
 
 
IMG_6897.jpg
 
 
 
 
 
All back together and with the foam all replaced and the heater core flushed it should operate better than before. They definitely don't look >40 years old now.
 
IMG_6903.jpg
 
 
 
IMG_6901.jpg
Link to comment
Share on other sites

  • 1 month later...

Well, progress is slow, but at least there is progress.

 

There is both good and bad news. Bad news is that there is going to be more work and cost than planned due to us finding lots of badly done previous repairs all of which will need fixed and I expect some more will be revealed during blasting. Good news is at least it proved my approach of going fully bare metal has been justified and my view that most places do a crap job of metal work has been proved correct. Good that all issues will be found and addressed and my choice of using Resto shack to ensure the work is done as best as possible is a good one.  

 

 

 

GPvA09Jg.jpeg

 

 

 

Badly repaired rear panel

 

uQZO-TIg.jpeg

 

 

qqRlWhsA.jpeg

 

 

 

juFps0Rg.jpeg

 

 

 

L_-_Z-4w.jpeg

 

 

Gone, right side bumper mount was bent, its now been sorted.

 

rNcsUZEw.jpeg

 

 

 

 

 

Rotisserie mounts made:

 

gKamMLxA.jpeg 

 

 

 

ffaPc7ZQ.jpeg

 

 

 

Scraping time

 

SMX3Znig.jpeg

 

 

 

BHWbbLuw.jpeg

 

 

 

Steam cleaned

 

3oSUaDUw.jpeg

 

 

 

8RXQ6fkg.jpeg

 

 

 

ZWIduNMA.jpeg

 

 

 

 

Unwanted brackets and holes in the bay welded up

 

JWm8tCvw.jpeg

 

 

 

QMetZlxA.jpeg

 

 

 

 

QgWpJlZA.jpeg

 

 

 

teq8m6pQ.jpeg

 

 

 

Link to comment
Share on other sites

  • 2 months later...

So, Lots and lots of badly repaired areas have been revealed by the dual media blasting process, not quite what I was expecting. Its all going to be repaired though and the car will be left mint. 

 

This is how she sits, parts are on their way and work should continue in January sometime. 

 

 

 

 

Edited by EF Ian
Link to comment
Share on other sites

  • 4 months later...

I decided to change my mirrors, this will take them off the doors and clean up the bodylines more, I'll not be using the bracket that they come with, I will be machining up an alloy bracket to mount them to the window frame.

 

spacer.png

 

 

 

spacer.png

 

 

 

 

Work has begun

 

Some photo updates:
 
Plenty of hidden rust so I am glad its all being removed properly from all the hidden areas.
 
 
hsjduxig.jpeg
 
 
 
 
spacer.png
 
 
 
 
Photo%2016-04-2020%2011%2008%2001.jpg
 
 
 
 
Photo%2014-04-2020%2014%2023%2059.jpg
 
 
 
 
Photo%2016-04-2020%2011%2007%2056.jpg
 
 
 
 
Photo%2016-04-2020%2012%2007%2053.jpg
 
 
 
 
Photo%2016-04-2020%2012%2023%2020.jpg
 
 
 
 
Photo%2017-04-2020%2011%2053%2013.jpg
 
 
 
 
Photo%2017-04-2020%2012%2043%2023.jpg
 
 
 
 
Photo%2017-04-2020%2012%2047%2051.jpg
 
 
 
 
Photo%2017-04-2020%2014%2002%2021.jpg

 

Link to comment
Share on other sites

Photo%2017-04-2020%2014%2020%2031.jpg
 
 
 
 
Photo%2017-04-2020%2015%2055%2002.jpg
 
 
 
 
 
Photo%2017-04-2020%2015%2055%2008.jpg
 
 
 
 
Photo%2017-04-2020%2016%2000%2050.jpg
 
 
 
 
The quarter panel repairs sections don't fit great, but they can be made to work and its still better than starting from scratch.
 
Photo%2016-04-2020%2014%2039%2056.jpg
 
 
 
 
Photo%2016-04-2020%2014%2040%2016.jpg
 
 
 
 
Photo%2016-04-2020%2014%2040%2027.jpg
 
 
 
Long way to go but its nice to see it started.
Link to comment
Share on other sites

  • 1 month later...

Must update here as the work on both sides is done, floors are starting now.

 

 

 

20 hours ago, Exposed said:

this looks great! good job on the blasting and painting. Where did you source your rear quarter panels from? Im having a hell of a time trying to find some and wanted to avoid making them.

I can help you there,  I got them from here.  They had them made for me and sent out within two weeks.

 

 

https://www.alfaparts.net/dat280.html

Link to comment
Share on other sites

  • 8 months later...
  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...