clarkspeed Posted August 11 Author Share Posted August 11 Got a new large bed 3d printer. Getting close on my next project you might recognize. 1 Quote Link to comment Share on other sites More sharing options...
clarkspeed Posted August 14 Author Share Posted August 14 Still trimming to do, but I could not resist stacking it up for a photo. 1 Quote Link to comment Share on other sites More sharing options...
Exposed Posted August 19 Share Posted August 19 great job on the 3d print, hows the fitment? Did you scan an existing panel or do everything from dimensions? Quote Link to comment Share on other sites More sharing options...
clarkspeed Posted August 27 Author Share Posted August 27 (edited) On 8/18/2024 at 10:22 PM, Exposed said: great job on the 3d print, hows the fitment? Did you scan an existing panel or do everything from dimensions? I measured and guessed at the profile so it's not exact but looks pretty good. Still printing and adjusting prototypes but almost there on perfect fit. My plan is to make a panel that goes all the way across in 4 pieces. Will also paint the inside feature with chrome paint. Edited August 27 by clarkspeed Quote Link to comment Share on other sites More sharing options...
clarkspeed Posted September 3 Author Share Posted September 3 Ok, tell of the tape. The Emporor has no clothes. Never mind the cross weights and I had the pads at wrong locations and 2 flat tires. But little disappointed at the final number. Really hoping to be under 2k. Got plenty of ideas to put on a diet, but didn't want to think about that yet. Good thing is I am really close to a 50/50 F/R and L/R. But that is without my weight in there. Still have a few things to add and subtract but will only get a little heavier. Quote Link to comment Share on other sites More sharing options...
JMortensen Posted September 3 Share Posted September 3 I don't remember the source, but I was pretty convinced by it that the goal is to get the front wheels equal. More important than getting cross weights perfect. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.