Tim240z Posted February 5, 2005 Share Posted February 5, 2005 Unbelievably crappy welds...... http://home.att.net/~jason510/l20bturb.htm Quote Link to comment Share on other sites More sharing options...
JKDGabe Posted February 5, 2005 Share Posted February 5, 2005 And he thinks it's a "new, improved set up"! Should I ever develop palsy and be blind in one eye and unable to see out of the other I'd still never post a pic of my welding if it was that bad. Quote Link to comment Share on other sites More sharing options...
datsunlover Posted February 5, 2005 Share Posted February 5, 2005 Wow.. did he use a stick welder for that?!? Quote Link to comment Share on other sites More sharing options...
john kosmatka Posted February 5, 2005 Share Posted February 5, 2005 wow, that guy can really make his welds flow.......jesus and I thought my welding was bad. Quote Link to comment Share on other sites More sharing options...
EvilRufusKay Posted February 5, 2005 Share Posted February 5, 2005 I feel better about my welds now! Quote Link to comment Share on other sites More sharing options...
Dat260 Posted February 5, 2005 Share Posted February 5, 2005 Man, it looks like he welded it under water. Those are ugly welds. Quote Link to comment Share on other sites More sharing options...
Pop N Wood Posted February 5, 2005 Share Posted February 5, 2005 Gotta admire the guys attitude. Kinda like posting pics from your colonoscopy. Quote Link to comment Share on other sites More sharing options...
Corzette Posted February 5, 2005 Share Posted February 5, 2005 Gotta admire the guys attitude. Kinda like posting pics from your colonoscopy. HaHaHaHaHAHA....LMAO......Good One.... Quote Link to comment Share on other sites More sharing options...
Guest Zyoul8r Posted February 5, 2005 Share Posted February 5, 2005 If my colonoscopy looked that bad, I'd just kill myself. Quote Link to comment Share on other sites More sharing options...
Mikelly Posted February 5, 2005 Share Posted February 5, 2005 That just looks like he either used flux core wire OR he had a gas mix on a gage that was bad, with an empty bottle... Gage told him he had PLENTY of gas... Don't ask how I might know, but on one of my very first roll cages I burned up a grinder fixing a similar "issue"! Hahahaha! Mike Quote Link to comment Share on other sites More sharing options...
JMortensen Posted February 5, 2005 Share Posted February 5, 2005 The sad part for me is I refer to this guy's page quite a bit. This page http://home.att.net/~jason510/dizzy_specs.htm is pretty damn good. Then again I guess you don't have to know how to weld to assemble advance curves on distributors... Quote Link to comment Share on other sites More sharing options...
johnc Posted February 5, 2005 Share Posted February 5, 2005 I'm thinking this is a joke. Look at all the trash sitting on the wiper motor and MC. Most likely he found this thing in a junkyard, took some pictures, and has posted a troll. Quote Link to comment Share on other sites More sharing options...
A. G. Olphart Posted February 7, 2005 Share Posted February 7, 2005 Looks like he was welding at cast iron, maybe with nickel rod. Haven't tried it in years, but remember that it was a pain. So much so that the last casting I had to stick together I preheated almost forever and brazed. (a diesel tractor's starter snout... it held). Old exhaust manifolds are especially nasty because they tend to burn/oxidize from both sides, so any actual metal gets harder and harder to find. Quote Link to comment Share on other sites More sharing options...
2126 Posted February 7, 2005 Share Posted February 7, 2005 Man, I had to chuckle when I looked at those welds! If this would have been on the other site, we would have seen comments like......Nice job, wish I could weld like that, keep up the good work, etc., etc. You just gotta love HYBRIDZ!!! Quote Link to comment Share on other sites More sharing options...
rustrocket Posted February 8, 2005 Share Posted February 8, 2005 Looks like birdshit to me. Quote Link to comment Share on other sites More sharing options...
Guest JAMIE T Posted February 8, 2005 Share Posted February 8, 2005 Here at the shop, we call those "Cat turds". Quote Link to comment Share on other sites More sharing options...
Heavy Z Posted February 8, 2005 Share Posted February 8, 2005 Looks like a bad scab, too bad they don't heal over time... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.