at-jefft Posted April 23, 2009 Share Posted April 23, 2009 Anybody know of any good body shops or referrals in the Chicago area? Namely around Aurora? I'm doing a body resto. (rust, dents etc.) Also interested. Link to comment Share on other sites More sharing options...
emeraldlion Posted April 28, 2009 Share Posted April 28, 2009 Also need a referal for north dallas Mckinney area. No one wants to touch my car. Pissed me off enough that I won't take my honda to any of these places anymore. Link to comment Share on other sites More sharing options...
cary Posted May 3, 2009 Share Posted May 3, 2009 Hey guys, check the link below.. that is one of the best shop ever... Link to comment Share on other sites More sharing options...
ab0z Posted May 3, 2009 Share Posted May 3, 2009 Hey guys, check the link below.. that is one of the best shop ever... I think they were looking for an actual shop that does the work, not a place to buy cheap crap to stick on your car. Link to comment Share on other sites More sharing options...
Marine1342 Posted May 4, 2009 Share Posted May 4, 2009 I guess there's not too many Z-ers in the chicago-land area... Link to comment Share on other sites More sharing options...
who dat.sun? Posted May 16, 2009 Share Posted May 16, 2009 Can anyone recommend a body shop that does custom work in the bay area? I'm looking to have my car wide-bodied. thanks Link to comment Share on other sites More sharing options...
palosfv3 Posted May 16, 2009 Share Posted May 16, 2009 Shameless plug . Link to comment Share on other sites More sharing options...
Kash Posted June 4, 2009 Share Posted June 4, 2009 Larry you guy really do some great work, will have stop by and get an estimate. Link to comment Share on other sites More sharing options...
Pharaohabq Posted June 8, 2009 Share Posted June 8, 2009 In Albuquerque, NM, I've used: Crown Coachworks 431 Edmon, NE - Near the I-25/Montano corridor at Edith, conveniently serving Albuquerque’s east side. 505-344-1090 Redd or Eric When I needed my Z32 fixed after a truck backed into me. They did a great job. not the cheapest, but IMO the best in the burque. I'm planning on having them do my paint on my S30HR when the time comes. Phar Link to comment Share on other sites More sharing options...
krakerjak Posted June 13, 2009 Share Posted June 13, 2009 Chicago i know a great sandblasting place Ace Sandblast 4601 w Roscoe st Chicago IL 60634 773-777-6654 there doing mine and all the parts and for and place in Illinois in general they charge half if not less of what the other places do. Link to comment Share on other sites More sharing options...
Marine1342 Posted June 13, 2009 Share Posted June 13, 2009 Hey how much are they charging you for the sand blasting in chicago? Link to comment Share on other sites More sharing options...
krakerjak Posted June 13, 2009 Share Posted June 13, 2009 500-600 but for the whole bare chassis, Link to comment Share on other sites More sharing options...
Project Z Posted August 28, 2009 Share Posted August 28, 2009 With the number of Z's here in San Diego county and there's not one body shop recommendation ? Please don't say 'Earl Scheib' ! Actually, Maaco and Earl Scheib aren't bad at all but I would do all the prep work myself if I would go to a shop like those two. If you want a quality show paint job, go to my friends at Sinful Enhancements at Lemon Grove CA. Link to comment Share on other sites More sharing options...
Project Z Posted August 28, 2009 Share Posted August 28, 2009 With the number of Z's here in San Diego county and there's not one body shop recommendation ? Please don't say 'Earl Scheib' ! Actually, Maaco and Earl Scheib aren't bad at all but I would do all the prep work myself if I would go to a shop like those two. If you want a quality show paint job, go to my friends at Sinful Enhancements at Lemon Grove CA. Link to comment Share on other sites More sharing options...
zeeboost Posted October 13, 2009 Share Posted October 13, 2009 I, too, would like a recommendation for the DFW area. I'm looking for someone to mold the flares on my widebody, so quality of the bodywork is important...I'm not too worried about the paint. Link to comment Share on other sites More sharing options...
z2go Posted October 15, 2009 Share Posted October 15, 2009 Any chance of a reference for the greater Sacramento area? There was mention earlier in this post, but only secretively and as a "call me and I'll give you the secret to life's great mysteries" tipper. Link to comment Share on other sites More sharing options...
Hugh Posted February 23, 2010 Share Posted February 23, 2010 (edited) Orange County, California: Riteway Auto Paint & Body 17395 Mount Herrmann St Fountain Valley, CA 92708 (714) 434-6060 info@ritewayautopaint.com http://www.ritewayautopaint.com/ They did the rear end and doors on my 240Z. I was very pleased with the work for such a good price. I am not affiliated with them, but would recommend them to anyone. Nice shop, great guys, and great work. Edited February 23, 2010 by Hugh Link to comment Share on other sites More sharing options...
Grungedude42 Posted March 3, 2010 Share Posted March 3, 2010 Any good shops in Indianapolis or surrounding area? Link to comment Share on other sites More sharing options...
82BlackNAGoldzx Posted March 11, 2010 Share Posted March 11, 2010 We are a small family own shop. Andy's Body Shop 162 N Ronks Rd Bird In Hand, PA 17505 (717) 392-4238 Link to comment Share on other sites More sharing options...
rwdawg2 Posted March 15, 2010 Share Posted March 15, 2010 I am located in North GA. I got a quote from a guy of 8-10k for my 1982 280zx and it has some surface rust on the drivers side panels, a couple of dents and a few scratchs. This includes stripping the car down to metal, body work, priming, and painting (two tone, black and silver). What do you guys think? Reasonable, or too high? Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts