280Z-75

I have 29 spline CV axles from a NON turbo 87 300zx diff. Let me know if it would work for you.

Bump an OLD thread, I'm looking again for that single rim...

I also have an R200 CLSD from an 87 300zx, it has the regular r200 diff cover and I will include a new gasket. I sold the finned cover. It doesn't come with the stub axles. I bought it that way. Can't remember the exact mileage, but the prior owner said it was removed from a totaled 300zx. $600 +shipping cost for it. I'm firm on the price

I have a turbo unit, that has shaft play, but have the downpipe and mid pipe to go with it. Not catalytic. If you have an R200 diff cover from a 75-78 or any other years that fit a 280z, I would do a straight trade for that if you're interested. I'm in San Jose.

Same one posted here: http://www.arizonazcar.com/pan.html Looking to pay $300. Thanks I'm in San Jose willing to drive as far as sacramento,ca

You can order them from Nissan. I read on a post somewhere they are $85 new. OR I have a complete set, dizzy, shaft, and pump for $165 shipped if you're interested.

Would you be interested in a set of snowflakes instead? Only 1 center cap though .

i have the black rubber piping only. $15 plus shipping if you still need one.

Here's a pic of the last version that JSK made. Does not have the JSK engraved in it, and from the receipt he left in the box, he has someone else produce it for him now.

I got one for $100 shipped. It was Juans last runs that does not have JSK on it. I still have it in all of the original packaging with the barbs. never gonna use it. I can set it up as an ebay auction if you feel safer that route.

This is a pretty old post, and you probably have your bumpers already. But if you need the mounts, I bought zccjdm's rear 240z bumper adapter brackets when he first started making them. $35 shipped if you are interested. http://www.zccjdm.com/catalog.php/azcarbum/dt93256/pd1790406/280Z_TO_240Z_FF__RR__BUMPER_CONVERSION_BRACKETS_

Hey Zen, Check autozone or O'Reilly. They cost about $80 rebuilit and loaded with pads. I bought them several years back, so you might want to inquire about price.

Hi Leon, Those were just a random pic I got off of the internet. I'm positive the ones I have at home are 16X7. I might just go the Rota route. But only looking for 16"s.

Still looking . Unless I have 3 interested buyers looking for singles . $150 each.

It's been a while, but I'm still looking for one...bump

Hey fellas, i'm looking for 280z 1975 seat brackets sliders tracks. The ones where both of the mounted ends are angled. I know that the 240z-260z are flat and mounted straight down. While the 76-78 have the angled front mounts and flat rear mounts. Looking to pay $30 plus shipping. So before you swap out those seats and throw them away, please take off the sliders and send them my way .

Bump...Still looking if anyone has a spare one? Thanks!

Just FYI,I did the swap, and if you have an R200 instead of an R180 the 70-71 shaft will have to be modified anyway. The hole spacing is different from what I experienced. I ended up just shortening my own 280zx turbo shaft. $135 in the bay area. I heard other areas might be cheaper.

You can contact them and see if they will produce it. I was trying to get a group buy going a long time ago. And the rep kept giving me different answers. First they said yes, then they said no. And then they contacted me months later seeing if I was still interested. I ended up buying a set from an Ebay seller from Australia. Group buy was hard though, they wanted minimum like 10-20 orders to produce it. Goodluck. http://www.klearz.com/datsun.html

I'm in San Jose, and I have one I might sell or trade for. I'll break down the original price for you: $200 for the tranny $60 for busted 280z transmission( bought just for bell housing) $175 for Troy Armish in Fremont, CA( now in Tracy) to machine bell housing and put it back together. That's $435 not including the additional cost of driving around finding all of the parts, and dropping off and picking up the finished transmission. And if you have a 280z, you know you will need to shorten that driveshaft by 1.75" - 2". If you know someone in SoCal TonyD knows of a place that does it for $50. I called around the SF bay area, and had mine done for the cheapest qoute of $135. Let me know if you're interested, and if you've got parts to trade for, or want to buy it out right.

Hi Nelsonian, You can try to get a groupbuy going through Klearz. I tried organizing a few years back, but there was not enough interest to move forward.

Hey Guys, looking for 1 panasport rim in a 16x7 size. Mine is cracked and price to fix was outrageous... Brand new from Datsunparts.com is $240, but for some reason the owner is currently on the road hunting for Datsun parts(unable to reach the guy) So if anyone has a spare one lying around..please send me a price, and if you're not in california qoute shipping to San Jose, CA 95121.

http://sfbay.craigslist.org/sby/pts/2825822149.html This guy in san jose is selling his 71 driveshaft. Not sure if it fits your description but you can verify with him. I bought it for $30, and he took a return when the flange didn't fit on my R200. Very nice guy, i think it measured somewhere along the lines of 28-29 inches in total length.

How long ago did you get yours shortened?

THANKS! That would definitely close the gap. Didn't know that it was missing! I bought the tranny without it. I thought that it was just that 3mm space, but did a little searching, and now I see what you're talking about. Seems like the missing dust shield that should be on the 240sx tranny will cover up the gapped portion. tranny with dust shield.bmp no dust shield.bmp