Jump to content
HybridZ

Domzs

Members
  • Posts

    1403
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by Domzs

  1. Yeah , i was going to go with that size . But with LS1 and auto , the exh. sits low . Just trying to close the gap between the tires and the fenders . I haven't lowered the car yet . It looks like a 4x4 with the lighter V8 . LOL . I would like to have the same stance as yours , it looks great !
  2. Yeah , i bought a set of XXR 527 16x8.25 +0 . Figured i might have to roll the fenders . Do have flares , bought from MSA , just not ready to do the work , on the bottom of my to-do-list . Just got the LS1 in it , doing detail work at this time . Thanks
  3. What are running up front ? My tires are coming today . I ordered 225/50r16 for 16x8 +0 , without flares . Hope they'll fit .
  4. Here is the result . Everything is about the same except for A-E , i got 1.373 k ohm . Test was done at 50 deg . amb. temp.
  5. Ok . I'll do it when i get to the shop tomorrow . It would be better if you do your testing at the ECM side , this will tell you if you wiring problem .
  6. I do have an 84 turbo and i do have an extra MAF . Don't know if they are the same .
  7. Not familiar with this swap . When you said cas , are you using 300zx dist. or external cas ?
  8. Maybe you are right . I was using Mitchell 1 Ondemand for info. I also have an 84 turbo and haven't had much problems with it , thank God , so i don't have much experience with the car . Thanks .
  9. Domzs

    wire woes

    If you are talking about the holes on the pedals then you are missing two buttons . Can get them at your local parts store . Maybe ask them for Honda application , think they are the same .
  10. Domzs

    wire woes

    LOL . The talking lady , voice warning system .
  11. From what can see , maybe code 21 , ignition signal , and 34 , knock sensor . And the five flashes , which is strange . There is no code starts with 5 or ends with5 . I would clear the ECM and recheck .
  12. That's a little strange . Both lights are not supposed to flash at the same time . When you turned the switch , was the key on or engine running ?
  13. Domzs

    wire woes

    I think the 6 pin blue connector is for cruise control switch . I converted mine to LS1 and converted the switch for other use so i can't confirm it .
  14. Have you tried to see if ECM stored any DTC ? With an 87 ECM , you should be able to check for codes .
  15. Try to run it with carb spray , disconnect intake boot and spray it into throttle body . If it runs good then you have fuel delivery problem
  16. Remove and cap off your vac hose to the brake booster and see if it runs .
  17. I agreed . Good looking car . Wouldn't change anything . And do you mean 15x8 -15 ?
  18. Domzs

    wire woes

    When i get a chance i will take some pic of my ZX . I have been busy working my 78 . If you have any questions you pm me .
  19. Domzs

    wire woes

    Don't replace the cluster yet . Check all your input signals to the cluster , prob. disconnected or missing connector . Rear def. should work without the sensor . You might have other problems . Are you pretty good with electrical and do you proper tools for testing ? I'll try to help you if i can . I do have an 83 turbo w digital dash in my collection .
  20. Domzs

    wire woes

    At least i can see your radio , climate control , and cruise control are inop. You need to make a list of things that don't work . Hopefully , we can id what is missing from the above pictures .
  21. Everything is bigger and better in Texas .
  22. Domzs

    wire woes

    I would check to see what's not working with the car then diag. it from there . What a mess . LOL . Good luck .
  23. Awesome build ! Definitely going to use some of your ideas and others to finiish mine .
×
×
  • Create New...