bobbyc

i have the mms sx rear calipers and z31 rotors...and i've been readin that a lot of sx guys use z32 rear calipers...2 piston vs 1......it seems logical that if the sx calipers are setup to work..then the z32 would bolt right up...now i'm not at any point in my car that i need bigger rear brakes...but just wondering if it would work. i know the ebrake setup is dif but that's alright..i have a hydraulic parking brake, adj prop valve..i know the debate..pressure on the seals yada yada....not a dd at all...but would it work? i did a quick search and didn't see anything.

it is good to stitch weld..weld a bit skip a section, weld some more skip and so on until you get it all welded solid...too much heat in a concentrated spot will warp it...i left a tiny bit of overlap..just cause trying to get the two to line up perfect and then weld is a major pita...i then hammered the back side down close and stitched the back..used some seam sealer for the areas between the welds.

dang..you guys made those?! pretty slick! i'm likin roxz!

no way!! i'd be way pissed...the hood was $210 then they charged for a box that was $25, and shipping came out way high at $150. your hood was next up...i just really like the stock hood....but your hood looks amazing...we'll see how it works out.

here's mine...i just made it so it fit and could weld it up

yeah....front edge is aligned with the buckets...i checked cause i was thinkin maybe they left extra so i could trim it to fit...but it's all lined up below.

unlimited products...website is www.up22.com the more i look at it in the garage the more i get pissed...if i knew i was gonna get such poor quality i would have just spend a few more bux and bought a hood from beta. it'd be worth it..

yep..brand new hood they had to "make" for my order. took em 3 weeks to turn out this thing...i'll call monday...i'm really not too impressed.

i got my hood from unlimited products. a post on here and talking to people...i got pretty good feedback and everyone said it was a pretty nice piece. i got mine in yesterday..full pin on...and this is what i got...i know most fiberglass pieces state that they need work to fit properly...but is this how it's supposed to be? corner a little crooked...needs work corner gone...one armed man with a sawzall had a seizure. frame hits upper rad support and doesn't close all the way. do they all look like this? thier pic on the website whos a pretty nice complete piece...i just don't know if i should be pissed or should i expect this with a fiberglass piece. if not i'm gonna call and tell them they need to use pics of my hood for their display pic so people know to expect ♥♥♥♥...cause right now i'm pissed.

i'll come pick up the 5 speed...i'm up in littleton so not too far away.

anyone have one? i saw some post where people had purchased...but there was no follow up? for anyone who does...how's the quality?

i'd really like a set too....reading through the post you say it isn't one piece? but the uncut ones are one piece? but put me down..i've been waitin for some to come out for the 240.

i'm gettin mine through www.spoilers4less.com overall price is 10 bux less and free shipping...it's made by the same company too. xenon

how was downtown man? you hatin life this morning?

hahaha...i wouldn't let me change it! xenon is xenon right?

just for reference....the xenon from spoilers4less is 189 with free shipping...msa is 199 and 36 shipping...just thought i'd throw it out htere.

man...i'll tell you what...i've been lookin and lookin...finally just found it... www.spoilers4less.com anyone have any other good places?

i'm lookin to replace my urethane air dam....and a long time ago i saw a link to some that were pretty inexpensive...it was the xenon or however it's spelled brand....and the website was something like cheapspoilers.com or something to that affect. who has the least expensive urethane piece? this is on a 240z

my grandfather used to sit in a tree with just a knife....then when one came under him he'd jump out and cut the throat...he was in some magazines for it.

looks good! i always take a worm gear clamp and clamp it on the pipe...even in the bends it works well...then take a sharpie and draw a line...then cut it with the grinder and cut off wheel...

as the title says...i'm puttin a hx35w in my 240z....the inlet for the oil feed line is a weird size and i'm trying to run SS -4 line as the feed (fixed ends). i've been searching the net and came across this. http://www.vwenthusiast.com/sootrocket/Holset/HX30_32_35_40.pdf and on page 14 it implies that the adapter would be m14x1.5...i know thati could drive to the hardware store and find a bolt and see if it threads right...which i might do...but does any one know for sure? if it is then i could just get this piece http://www.autometer.com/cat_accessoriesdetail.aspx?vid=57 and be done with it...looks easy enough

i say the xterra i towed the z from durango to denver goin 160 to walsenburg or however it's spelled then up i25.....as long as the AC wasn't on in the hills it did fine, flat ground it didn't realy matter...and i was towin about 4200lb.

awesome man! congrats! i've been a new dad for a little over a week now...it's awesome!

thanks guys....i'm really excited! camera is still at the hospital but here's a pic from my phone

been away for a couple days so didn't get to post...but my fiance and i had a baby boy may 4th at 6:49pm! weighed in at 8lb3oz, and 21 inches long...everything checks out perfect! just excited and thought i'd share...it's my first! oh yeah...i passed on my name...my intials are RHC V....he's the VI!!