Jump to content
HybridZ

Dave

Members
 View Profile  See their activity

  • Posts

    350

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Dave

  1. Dave
    I saw that this morning on the DrudgeReport. This old coot said that the 10 year old came to him!!!! This JUST MAKES MY BLOOD BOIL. Dave...
  2. Dave
    Were you using gas shielding and .023 wire? Dave...
  3. Dave
    NISMO sells the following springs for the 240. What is the reason the RF & LF are different when the spring rates are the same? Stage I: 54010-E4107 240Z Spring / RF (101 lb/in) 1ea 54010-E4106 240Z Spring / LF (101 lb/in) 1ea 55020-E4201 240Z Spring / R (112 lb/in) 2ea Stage II : 54010-E8100 240Z Spring / RF (122 lb/in) 1ea 54010-E8101 240Z Spring / LF (122 lb/in) 1ea 55020-E8100 240Z Spring / R (140 lb/in) 2ea Dave...
  4. Dave
    Make shure the R200 comes with the side axles. Do your 1/2 shafts bolt to the R180 with a 4 bolt flange? If it does then your 1/2 shafts can be used in the swap and bolted to the R200 side axles.The front mount is the same for both differentials. The R200 mustache bar is flipped around so it is behind risers not in front like the R180 mustache bar. Dave...
  5. Dave
    The more I thought about this the more I think the topic line should have been "addadicktome" Dave...
  6. Dave
    Somehow I don't think these were the replys he had in mind. Dave...
  7. Dave
    On my mid 80's 350 the bumps face the converter. Dave....
  8. Dave
    I just went through the same thing. I found that a pair of the small Robo Grips was the perfect tool for the job. Dave....
  9. Dave
    I have used a product called Goof Off that is intended for house hold paints. There is also Goo Gone that I have used on plastic computer parts to clean up overspray. Dave...
  10. Dave
    Man that Z has one bad blind spot. Dave....
  11. Dave
    For us it appears that there is only one bible unless we write another one of our own. Dave....
  12. Dave
    The stock brake lines and nuts are metric. Make shure that if you buy new brake lines they have the metric nuts. I found that metric lines from NAPA are 3/16 SAE tube with metric nuts. Dave....
  13. Dave
    Does any one know a source on the internet for the male end that is on a welding lead and the female receptacle that is at the welder that the welding lead plugs in to? When I ask at a welding supply store they want to know what type of welder it is for. All I want to do is put a couple of the female receptacles on my Z so I can connect a jumper battery since the battery is not all that accessable. Dave...
  14. Dave
    Needle Scaler $49.99 This is the one I bought and it works well. http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=1108 Dave...
  15. Dave
    Give this a try http://groups.google.com/groups?q=latham+superchargers&svnum=10&hl=en&sa=N&tab=ig Dave....
  16. Dave
    I just found this new Lincoln Mig welder for sale on Zcar.com http://zcar.com/classifieds/class_parts/9504 Dave...
  17. Dave

    r230 bolt in kit

    Dave replied to fl327's topic in Drivetrain

    R230 LSD's $200 plus actual shipping. I was at All-Z-East here in Portland yesterday and Mike said that he has quite a few of the R230LSD's and he will sell them for $200 each. E-Mail him at douglasallz@aol.com or call them at 503-666-5659 I have bought a quite a bit from them and would not even think twice about a purchase from these guys. Dave... Blood sweat and gears Thats the name of the game
  18. Dave
    I have the JTR manual but the neutral safety backup switch they recommend is for the 700-R4. The shaft for the shift lever on the 700-R4 sticks out so the switch can be installed over it. The TH350 has no room for the 700-R4 switch. will the longer 700-R4 shaft fit the TH350? Dave....
  19. Dave
    I am using a TH350 and the stock Z's automatic shifter. Does any one have a solution for a neutral safety switch. I can't find anything that will easly work and be fool proof. Dave...
  20. Dave
    When it comes to connecing the the brake lines what did you use? Is there a way to keep the SS brake lines that I have for the stock calipers? Dave...
  21. Dave
    Check out this engine stand. http://12.224.13.212/sale/ This idea could be applied to the rotissorie.The gear reduction assembly looks like what is used on a large over head door that is opened with a contunious chain Dave...
  22. Dave
    The foam should be available from any hardware or home improvement store. Dave....
  23. Dave
    Looking at the directions it says to use the front hole on the shift lever at the tranny. There is also a bolt that is in the shifter on the stationary portion just below where the cable attached that needs to be removed for a 4 speed auto. Dave...
  24. Dave
    Hey PETEW fire me back a E-mail I have some pictures and the plans to build the mounts. Your E-mail address bounces. Dave...V8-240Z@juno.com
  25. Dave
    Well, If not a small block Chev because of the rear sump what about a small block ford that has a front sump? Dave...
×
×
  • Create New...