roger280zx

I would reSEARCH if I were you. You may be setting yourself up for dissapointment. In other words; the 70-78z was neither a 280zx or a turbo. What you are looking for is likely the axles from a 81-83 280zxt, though they may have started the turbo in 1980, not too sure. But you do need to research your product further before you start posting. Good luck!

You know the vw sandwich plates will fit our L's. They're pretty cheap, and my vw guy ordered 1 and they sent him 3 or 4, for the price of 1. I can probably get him to let me have one for next to nothing, call me and remind me. Happy Thanksgiving; I feel fat

I will be building a set out of sheet metal and should have enough left over for a couple more. I would sell them at a discount to the ones currently on the retail market as I would really only need to recouperate my costs (minimal). Let me know.

I have one I need to get rid of, but I can't bring myself to throw it in the dumpster. The floors, doors, and normal stuff is rusted, but some how the bat. tray and other parts are good. I'm not that far from you so let me know what you need and could offer and I'm sure we can work something out.

I would think the worst thing that could happen would be when they turned around and shot you. Next worse would be doing five years for terroistic threats (felony). Third would be having them take the gun your afraid to use away from you and make you regret even having it. No offense dude, but if your gonna pull it out you should be ready to kill, not just put a round off in the air.

Back ground; my dad had a bunch of '55 chevy's, even a '55 Studebaker pickup, so I grew up liking cars. When I was 16 everyone was building fast hondas, but I couldn't get into the front drive stuff. When I expressed those thoughts to a local speed shop opperater he said "Get a z car and put blown small block in it; it'll be cheap, handle well, and really really fast". Ten years later, after owning several z's, here I am building a 240 with a blown v8 (albeit not a small block). Life is funny. I can't wait to finish it, look him up and give him a ride as thanks for the inspiration. I would also like to thank the members and administrators of this site because the wealth of accessable information is what led me to purchase my first z. A black 110k mile 280zx I picked up at age 20, rip.

I'd drive that truck. But then again I don't have to impress any one with my mode of transportation. I don't miss high school at all.

Looks very nice. I like the oil pan. You're giving me ideas...

I have some 1983 non-turbo 5spd axles, but shipping is gonna blow. Let me know if you want them anyway.

As stated above, vacuum leaks kill these things. If you want to switch to the later and better system please let me know (shameless self promotion). I battled with worn out diaphrams and dry rotted/missing vacuum lines a long time and a lot of money ago. Then made the switch.

Just add me to the list of people who have tried to talk you into selling these and failed. I'm sure glad to read that you are busy; though.

I have two sets of door to choose from, and two hatches. All parts are in very good condition since they've been stored indoors for quite some time. I will negotiate on the price if you are buying several parts and shipping won't be too bad from NE Georgia; especially if you can wait a few weeks. PM if interested and I'll email pics.

I would like to encourage you and say take the leap now. You have a real tallent and the time to gain market share is when the economy is beat up.. even if it costs you a little. Keep the faith and turn some parts out, it will be more than worth it when cosumer spending comes back up. If not I'd drop my stimulus $ for one of those sweet manifolds!

I have a complete used set I''ll sell for $80 + shipping. I never had trouble out of them but I can't promise no leaks... I know the reputation these things have. Pm if interested, some trades considered.

I fixed one that looked worse than that... then I REALLY messed it up!

I guess it couldn't be those damn fuel lines we ran backward from the filter could it? Ha ha! I have a spare intake with an fpr on it if you wanna try that. Good luck!

I have a pretty complete 1983 280zx T-top black interior. Basically everything is there; however, you probably wouldn't want the dash or the tail light panel. I would let the whole thing go (less carpet, seats and above items) for $300 + shipping, some trades considered. I could also refinish the tail light panel for $150. Let me know. Thank you

Roflmao! Thanks flatblack that is hillarious.

I've got em, can only email pic. PM please. Thank you

401K... I remember those.

IMHO revs are much more dependent upon headflow/cam and overall recipricating mass/balance. Look at the honda family, almost entirely undersquare rev-happy engines with technically horible rod/stroke ratios: borexstroke rod/stroke f22c 87x90.7 1.65 b18b 81x89 1.54 b18c 81x87.9 1.58 k20 86x86 1.62 k24 87x99 1.34 All of these engines will rev high and make unbelieveable power once properly modified. I would say spend the money and time in your head and turbo, then stick the longest rod that will fit easily in there... for most engines it is counterproductive to engineer around rod length.

Holiday + tax season + tons of work + family obligations = this is taking me forever. Thank you so much for your patience. It will be heading your way soon!

I would shamelessly pich to you my stock 280 fuelly system; however, I doubt that it will run well with that cam. My sugestion would be either the tbi mentioned above or some sort of stand alone efi. But imho a set of well tuned stock su's would be better than that down draft 4 barrel. I do agree with searching more... that will give you the chance to form your own opinion instead of just taking the advice of others. Good Luck!

Hugh, I have removed the piece and am in the process of cleaning it up for you. Sorry for the slow pics, but she will be coming your way soon! Thank you again.

I have a '72 for $50 + shipping. Pm to let me know.