Derek

Yea it seems there was a lot of ambiguity and zero pictures of an installed fan. Tony D was in the "installs with minor trimming" camp. That's why I'm still pursuing it. I like the fact that it's an OEM fan that will run reliably and that it's a 2 speed. Derek

Hi Adam I'm going to have megasquirt run it. Hurry up and get it installed:) Derek

Gainseville is about as far north as I've been making it lately! Derek

And if so can you post some pics? Thanks Derek

I didn't say it was I only said it shouldn't be! It seemed like there was a string of posts getting tossed to the shed. Derek

Sorry for the multiple posts but I want to make sure previous buyers get this info http://forums.hybridz.org/showthread.php?p=1065897#post1065897 I'm also offering a timing plate to make life easier. http://forums.hybridz.org/showthread.php?p=1065900#post1065900 Post #4

I just uploaded instructions here http://forums.hybridz.org/showthread.php?p=1065897#post1065897

Since you have to remove your timing plate to mount the sensor I made up blank indicator plates to mount on the left side. $15.00 if you buy a kit. They're a real pain to make and there's a bit of hand (hammer) work in them so they're not show quality. Derek

I wish! I ended up buying all kinds of little stuff on ebay. Iguidance works ok but I'm not thrilled with it. I chose it because it plays nice with road runner. I've only used it a couple of times and that may be the problem!. Derek

Looks like a plan. I'm running the jetway with the Atom 330 and have Zero complaints. If you can fit the 12" then I say go for it! Derek

PM sent

Hi Adam Welcome aboard. There is a Z car club in Gainesville. We meet every month (usually) at either Blue Highway pizza or at Bill Coffey's garage. Check out this post http://forums.hybridz.org/showthread.php?t=150120 This is a great time. Derek

I have one but I'm in ocala. Derek

have a post in the vendors forum. I thought I would update this thread as well. http://forums.hybridz.org/showthread.php?t=153254 Thanks Derek

Thanks. I'm working on a PDF install sheet as we speak. I'll update with some install pics soon. Derek

Well I think I finally worked out all the differences in the dampers and have settled on making the adapters fit two groove damper from the AC equipped 75 through 78 280. This is the damper The outer groove takes the same size belt as the inner groove. This is not the right damper I have 6 assemblies available. This is an assembly It includes a longer crank bolt and the bolts to attach the sensor mounts. The price is $175.00 plus shipping. I also have 2 ford coil brackets that are available for $35.00 each. You have to buy an assembly to buy the bracket. I'm not offering them separately right now. I'm only shipping to the US as I have to drive the stuff to the post office and stand in line to ship anywhere else. Sorry. I had to bump the price a little but it's still a pretty good deal to get EDIS on your car quickly. Thanks Derek

The "there's got to be a better way" workers have been beat up for so long by the "don't upset the cart" workers in this country that I'm not sure if we'll ever recover. Self employed, (synonymous with broke) and thinking of better ways every day! Derek

I used the relay board on mine and i can't imagine doing it without. It made everything so much easier to hook up. Derek

Before this gets sent to the tool shed for necroposting can't you just delete his (and mine for the matter) post. If it's sent to the tool shed then it closes the post. This never mattered to me before but that mcmaster part number is exactly the vent I was looking for for my fuel system. Just a thought Derek

Here you go http://forums.hybridz.org/showthread.php?p=1061757#post1061757 Derek

I did a count earlier. You had like 8 posts in under an hour! Congrats:-D Derek

Some of the early series 1 cars had two levers. one for the choke and one for the throttle. So If you have one lever it's the choke. Derek

Looks good! The wider opening make life easier. I don't think I could getaway with ne center vent though! What front end are you running? Megasquirt, navigation and the lack of running more than one app at a time on the iphone keeps me using the carputer. But I really wish the iphone did all that! Derek

Hi Greg No plans to make the adapters. I'll certainly release the 3D model if you know anyone that can machine it for you. Derek

Skin http://www.mp3car.com/vbulletin/rr-skins/117143-digitalfx-4-0-released-07-25-08-a.html Derek