240Z_Master

Cusco is a pretty known Japanese aftermarket brand. The only reason I am considering putting my intercooler behind the support is I got too large of an intercooler (yeah theres no such thing as too large of an intercooler). I would have to modify my end tanks which I don't have the skill to do so, but I just might take them to go get modified, I'm just seeing what options I have that's all.

I checked the clearance between the radiator support and the front of the engine damper. It is about the size of a DVD box so about 7.5"s. In this case, I might want to mount my intercooler to the support, and hang my radiator after that with about an inch to spare. It's cutting close but I'll recheck this later.

It's a Cusco Brace made for the 240Z. Front and Rear

My car uses the bolt up, but I'm going to plan on making another mount that uses the slide through pins.

I guess I see your point. But the S15 6 Speed isn't even that great or could handle the power in my opinion, and the Z33, how many countless problems have I heard about that clutch.

This one relocates it a bit, I should double check that before I run off and bid.

That's what I would try to do.

I've already made one extra set for the 240Z chassis. ALSO! I will be making tranny mounts for the 260/280 style also. Before I sell the mounts, I want to check the fitment, and the strength of the welds on the mounts, I would hate to sell you a mount and then have your transmission fall out. Zhad, if you had some time to swing down my way or me swing up there to the LBC, I would love to show them to you to have someone give me a second opinion. ALSO ONE MORE THING! The mounts I will sell will come with mounting hardware, all the bolts needed, and a set of new engine insulators. Give me about another 2-3 weeks so I can finalize the 240Z mounts, and about 4-6 weeks until I release the 260/280 mounts.

Search for Rick Wong, or Infinity Machining or something. He also has a handle somewhere on this site. His mounts are nice, I like em, but they're just pricey, and I like using the 240Z insulators.

HKS might make one for the 26, but I have always liked the Cast RB25DET manifold that HKS makes. No one else makes a nice enough (affordable) tubular stainless manifold.

Custom mounts that I made that bolt to the stock 240Z insulators. They fit really nice, even the transmission bolts up with no modifications to the car! JUST A NOTE!: My motor is mounted to the car with no modifications to the chassis, therefore if you want to put back in your old L-Series, YOU CAN!

I've already got my eye on that!

That's Datsun 919 Yellow to you! Haha

More updates coing very soon!

Sleeve it to a 1.8L and you'll get you revvs, but that's just stupid.

Anyone know where I can get one? Part number? Have been looking everywhere just wondering if you guys have "da hookup" -Quoc

Hey hey now, the GReddy Type RS Bov's are in stock now, ask Ryan how fast he got his!

If someone knows which system to use on the RB25DET right now that would be greaaaat! I am highly considering this system, but would like to utilize my Coil Packs.

Part Number is "13922001" Like I said earlier I'm contacting my distributor to see if he can get these pieces for me at a discount off of MSRP. If anyone is interested let me know.

Hey JT, What do you plan on doing with your old driveshaft?

Yeah I don't think those manifolds and turbos are any good to be honest.

Hey, isn't that the clutch I sold you? Haha

(1) My question - is it better to use a short nose out of a modern 200Sx or something? Short noses might be more available, but you'll have to custom mount it. The long nose R200's you can use hardware out of the 280Z (I'm not sure which car you are using) (2) no one has commented on whether I can adapt GTR brakes to the 240Z? You can adapt any kind of brakes you want, just as long as your skills enable you to do so, most likely will be custom mounted which you might have to figure out on your own, or search for this topic in the "Brakes" forum (3) Can anyone help with engine mounts & gearbox mounts - does anyone supply adaptors or not? I can grab you some motor mounts, but if you want a transmission mount, I might be able to supply you one if your car is a 240Z.