Buzz

I have a set of sport max 002 hyper silver 16x8 0 off set piratically brand new,in boxes.I think that SSR took over for sport maxs they are the same wheels..Nice wheels $400 plus shipping Thanks Mike I can send pictures if you want. Not sure how to add them here.

How long does the snow last there? We are suppose to get 5 more inches tonight here in N.Y. Orange county.

He said he has a 4 wire dryer outlet,which means he has a neutral and a ground at the outlet. So why would you tell him to hook the ground wire to the Neutral,he has a ground wire!!! Neutral is the grounded current carrying conductor back to the transformer. Will it work,yes. Do they go back to the same place at the main panel,yes. Is it the right way to do it,NO!! Use the GROUND WIRE!

ozzzzz Is right,If your not comfortable with electric don't mess with it!!! Some one could get hurt!

Just buy a 4 wire plug that matches the dryer outlet,provided it's a 30 amp outlet. Don't hook any wires up to the Neutral screw on the plug(usually silver screw) ,You should only have 3 wires coming out of your welder? 2 hot wires and a ground (bare or green or green tracer on blk wire) 240Volt single phase or you could change the outlet to match the welder. wired the same way. red and black are your hot and bare or green is your ground,cap off the white and push it into the box.Make sure you use the ground,it's for safety.

Put it in a garage!!!

What Kind of compression are you guys running with the blow threw set ups?

Yeah!! Buy a house see what bills you have!!! On second thought stay home with mom and save your money. And you get free meals!! Or you could build me a 6 car garage and you can keep your car there free!!! LOL!

It seem to me that once the fuel is in the carb it can't come back out into the fuel line,the float closes,why would you need a return? Just to circulate fuel threw the lines? Maybe for vapor lock.if you could flow fuel threw the carb and back out that would make sense for cooling the carbs.I had a return on my webers it didn't seem to make any difference. A heat shield make more sense! Just My 2 cents!!!!

I bought some belt mouldings from him for 280 that are not right,They look right until I tried ti install them,there is no contour to the so the won't stay on the door,I bought 240 ones right from nissan and they fit perfect just not the right ones.

More money than brains!!!

must be a z person if they took trim and stuff that only fits a Z!!

Fork lift , WTF sue them

on your creeper,fell in your shirt pocket!

Sounds like a bad muffler bearing!!!

You didn't have to use spacers,the wheels didn't hit the caliper or the strut?

I would say sand blast,rust converter,bondo,then expoxy primer on top of that.Then paint.I never had good luck with POR 15 seems like the rust still came back using that. Just My 2 cents.

Looks great,How's the fitment of the CF hood.does it fit as good a stock hood?

Hows does the CF hood fit,Is the fitment as good as the stock hood. Looks Great!!!

send me the link!!!!

I'm looking for the rear wood decking for a 77 280z,the wood behind the seats that makes it level.I'm not sure if it has a hinge on it. Thanks Mike

Pop the stud out!

LOOKS like you will need new Quaters now.

OMG!!!! What did you do!!!

There's not many moving parts in webers like other carbs,Mostly jets, 1 part at a time,Take it off clean with car cleaner and compressed air no wires or drill bits and put it back on,it's not bad at all.count the turns on the needles when you take them out,clean and put them back in,it's that easy.If they worked before they will work again.