stupid_fast Posted October 14, 2019 Share Posted October 14, 2019 (edited) Parts located in Sacramento Delta area, California a few miles off hwy 12. Reasonable offers accepted. I no longer have the desire to horde z parts due to other goals, I would prefer these parts be used again by those who need them and not get scrapped. There are also random ZX parts I still need to sort through, all the chassis controller boxes for an 83 such as the dash diagnostic control unit and cruise control unit. L28e dish pistons with rods $40 L series 6 cylinder points distributor $20 L28 F54, bored out too far, needs to be sleeved. have sonic test numbers. $80 obo 280zx turbo oil cooler core $40 L series 'white bunny' clutch setup, 240mm flywheel. $40 280ZX turbo R200 long nose 3.54 with welded center $80 R200 long nose 3.9 with welded center $80 good shape 1982 turbo ZX T5 box, needs reassembly and some parts, message for details. Will not part out. MANIFOLDS: 2x L28e EFI intake manifolds $75 each 2x L28e EFI exhaust manifolds $75 each 1x L28 smog exhaust manifold welded up $75 L16 exhaust manifold 1972(?) $50 WHEELS PAIR of 15x7 +22 Road line 4x114.3 no tires $100 PAIR of 16x8 +20 XXR 4x114.3/4x100 with new Archilles ATR 2 225/50r16 tires $200 Edited July 22, 2021 by stupid_fast Quote Link to comment Share on other sites More sharing options...
Tarheelz Posted October 14, 2019 Share Posted October 14, 2019 Interested in one of the L28 intakes. Also looking for a good 5 speed. Let me know b Quote Link to comment Share on other sites More sharing options...
ritrebor Posted October 14, 2019 Share Posted October 14, 2019 I'll take the r200 mustache bar if you will ship to 90045? ritrebor Quote Link to comment Share on other sites More sharing options...
chopkins12 Posted October 14, 2019 Share Posted October 14, 2019 Interested in the R200 mustache bar and the clutch setup if you are willing to ship. Quote Link to comment Share on other sites More sharing options...
stupid_fast Posted October 20, 2019 Author Share Posted October 20, 2019 After taking a closer look at the part, it seems i made a mistake with the mustache bar. Its in fact an R180 mustache bar. Sorry about that! Quote Link to comment Share on other sites More sharing options...
ritrebor Posted October 21, 2019 Share Posted October 21, 2019 Ok thanks Don’t need a 180 ritrebor Quote Link to comment Share on other sites More sharing options...
jomz shakes Posted April 26, 2020 Share Posted April 26, 2020 interested in t-tops, 470-544-6178 Quote Link to comment Share on other sites More sharing options...
chopkins12 Posted April 26, 2020 Share Posted April 26, 2020 Do you still have the clutch setup? Would you happen to have a turbo distributor for sale? Quote Link to comment Share on other sites More sharing options...
McKleenZ Posted May 9, 2020 Share Posted May 9, 2020 I’m fairly local and would take the oil cooler and clutch this weekend if you still got em! Possibly some other drive train parts Quote Link to comment Share on other sites More sharing options...
ISPKI Posted May 18, 2020 Share Posted May 18, 2020 Possibly interested in the R200 long nose. Are you willing to ship it to CT? Quote Link to comment Share on other sites More sharing options...
stupid_fast Posted July 6, 2020 Author Share Posted July 6, 2020 Hey guys, sorry I haven't been on here in a while.@chopkins12 I have the clutch still, your profile says you're in NY.. its going to be unreasonably expensive to ship it. I don't have any spare turbo parts other than what's listed.@McKleenZ message me if you're still interested in dropping by. @ISPKI Shipping is very expensive for any bulky parts, you're probably better off getting it local but I can get a quote if you're determined. Quote Link to comment Share on other sites More sharing options...
AIShelby Posted July 7, 2020 Share Posted July 7, 2020 Interested in points distributor and a T5 bell housing if you still have them. Quote Link to comment Share on other sites More sharing options...
Villeman Posted July 7, 2020 Share Posted July 7, 2020 Do you happen to have a Thermostat housing with the sensors? Overheated my engine and fried them up Quote Link to comment Share on other sites More sharing options...
stupid_fast Posted July 7, 2020 Author Share Posted July 7, 2020 @AlShelby I will not be parting out the T5, but the points dizzy is available. @Villeman Sorry I gave away my extra thermostat housings already, I can't find any more. Quote Link to comment Share on other sites More sharing options...
loganpratt22 Posted August 13, 2020 Share Posted August 13, 2020 Hey, I was wondering if you still had the f54 block? I need a set of main caps... Text me if you have those. (443) 844-7041 -Josh Quote Link to comment Share on other sites More sharing options...
zach89 Posted September 24, 2020 Share Posted September 24, 2020 i’ll take the mustache bar if you still have it and willing to ship. 88101 is my zip code Quote Link to comment Share on other sites More sharing options...
Marc_P Posted May 26, 2021 Share Posted May 26, 2021 Shot in the dark - do you have a front transmission cover for a FS5W71A or B you'd be willing to sell? Quote Link to comment Share on other sites More sharing options...
jeffer949 Posted July 19, 2021 Share Posted July 19, 2021 Hey, I'm needing a set of NA injectors for a 84 maxima I'm working on. Do you happen to have a set? They are the same as the 280zx NA ones. Thanns Quote Link to comment Share on other sites More sharing options...
Z Bear Posted March 15, 2022 Share Posted March 15, 2022 I know its been a while...do you still have the 5 speed? If so, what can you tell me about parts or work it needs to make it whole and what you want for it. I live in Arizona in winter and central Oregon after April so could drive to Sacramento area to get it in May. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.