Booztd 3 Posted February 28, 2007 Share Posted February 28, 2007 Guys I got a chance to get over to the car tonight and see how the manifold fits up. There are a few small fitment issues, but I dont believe that I need to rule using this manifold out of the picture. We still havent finished the motor mounts yet, and it may be a little while longer until we do, because this manifold has complicated things sligthly. We belive by dropping the crossmember just a little bit more, along with shaving some material off the botom side of the hood, will get the job done. The exhaust housing clears the location no sweat, its just that bigass compressor thats the issue.... Here goes nothing As for the compressor housing outlet, we're going to cut it off at the 3" diamater section (the outlet has a 3.5" vband) this is very common among supra owners and is exactly what full-race did with their gt42 rb26 240 as well. Cheers Quote Link to comment Share on other sites More sharing options...
thehelix112 Posted February 28, 2007 Share Posted February 28, 2007 Holy jesus. Dave Quote Link to comment Share on other sites More sharing options...
BillZ260 Posted February 28, 2007 Share Posted February 28, 2007 Uhhhhh....... Cool Quote Link to comment Share on other sites More sharing options...
240Z Turbo Posted February 28, 2007 Share Posted February 28, 2007 I have a v-band discharge flange available for the 42R Quote Link to comment Share on other sites More sharing options...
slownrusty Posted March 1, 2007 Share Posted March 1, 2007 Daddy likey...!!! Quote Link to comment Share on other sites More sharing options...
ZDrifter Posted March 1, 2007 Share Posted March 1, 2007 That picture brings a tear to my eye.. Seriously that is beautiful, also what color did you use for you cam covers and coilpack/center cover?? Im thinking about going with flat black and gloss black accents with my RB25. Looks great man keep up the good work!!! Quote Link to comment Share on other sites More sharing options...
Booztd 3 Posted March 1, 2007 Author Share Posted March 1, 2007 Thanks! The finish is a semi-satin black....however I'll probably end up doing a gloss-black setup because the wheels on my car are gloss black with a polished lip. I'll more than likely end up polishing the compressor housing on the turbo as well Quote Link to comment Share on other sites More sharing options...
EZ-E Posted March 1, 2007 Share Posted March 1, 2007 Eh its alright, no honestly that is beautiful work. Quote Link to comment Share on other sites More sharing options...
240hoke Posted March 1, 2007 Share Posted March 1, 2007 I think I know what my next project will be! That is absolutly AWESOME!!! Quote Link to comment Share on other sites More sharing options...
ZDrifter Posted March 1, 2007 Share Posted March 1, 2007 Nice, I just got gloss black wheels with a chrome lip aswell. I love how that manifold looks, I still dont know what Im gonna go with...Havent looked much Im goin gt35r and top mount manifold. Quote Link to comment Share on other sites More sharing options...
stony Posted March 1, 2007 Share Posted March 1, 2007 looks like the fwd wastegate is going to be an issue also????? Quote Link to comment Share on other sites More sharing options...
Booztd 3 Posted March 1, 2007 Author Share Posted March 1, 2007 looks like the fwd wastegate is going to be an issue also????? Yes, the fwd wastegate touches the fenderwell area just a little bit.....i aint skurred Quote Link to comment Share on other sites More sharing options...
Careless Posted March 2, 2007 Share Posted March 2, 2007 Yes, the fwd wastegate touches the fenderwell area just a little bit.....i aint skurred put a heat resistant foam between the two so it doesnt rattle when the engine vibrates or something... just for audible sake =) looks pretty gangstur th0! EDIT: and it looks like the compressor outlet is going straight into the wheel well area.. LOL. run an IC pipe through the spokes of your front wheels Quote Link to comment Share on other sites More sharing options...
synthtk Posted March 3, 2007 Share Posted March 3, 2007 Looks good in that engine bay... makes me want another Z32. The fitment issues don't look like anything a big hammer wont fix Quote Link to comment Share on other sites More sharing options...
Racin_Jason Posted March 6, 2007 Share Posted March 6, 2007 Geez, You might hear that spool just a lil' Quote Link to comment Share on other sites More sharing options...
turbo_fb Posted March 10, 2007 Share Posted March 10, 2007 Nice manifold and setup. How's hood clearance with that beast? You have a link for thoose guys selling that manifold or you made it yourself? Quote Link to comment Share on other sites More sharing options...
vashonz Posted March 10, 2007 Share Posted March 10, 2007 http://www.full-race.com/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.