Tim240z

No such thing as far as I can find and I searched for ages! There are some pictures on the Yahoo files page, but it is of the Version 1 board as far as I can tell, because it doesn't look the same. I am going to write up some decent instructions when I'm done with it. Tim

Eric, I used the stimulator directions from the Yahoo site. I've been somewhat successful: Here are those instructions: Tim

Then without the appropriate diagnostic tools, you are going to be chasing your tail. It could be a vast number of things (leaking injectors etc, etc). See if you can rent a FPG from the local parts store, or borrow that first one again. Tim

Are you using the stock 240Z fuel lines? Might be that the return line is not large enough. Get a fuel pressure gauge before a new pump. Tim

"must be the Puppy Chow!"

Very cool. As soon as things calm down at work a bit...I'll get on this! Tim

If you don't have ANY of the necessary supplies (relays, wire, terminals, crimping tool etc), then order from Waytekwire.com. If you want I will look in my catalogue and give you all the necessary part numbers, if you tell what you have, or don't have... Tim

Mike, Installing relays is pie, dude. There will be 4 terminals on the relay. 1 is for earth 1 is for switch positive (just use the existing hot wire that currently goes to the headlight...the main juice wire) 1 is for battery positive. Run a nice thick wire 10 gauge or thicker straight from the battery or starter (get an inline fuse holder to be on the safe side). 1 goes to the headlights. I believe I remember someone saying that Pete Paraska has a writeup on his site. Very easy. Tim

I think that you will have to mod your light housing to accommodate the little aux. light coming off the side, and will have to wire in some relays, but should be ok. Tim

I have a rechargeable sawzall.....great for the Junk Yards! My next tool will be a pneumatic nibbler though....cuts sheetmetal with very little distortion. Tim

damn Mike...you're on a major spending spree huh?

Yes..identical except for the vents.

OMG...a sunny day in England ....did you sell your soul? BTW...very sweet ride!!

Hmmm....depending on the fuel supply, you will likely not pass the emissions test! Tim

Hmmmm huge bummer Mike!! Maybe time to invest in some CC TV equipment and motion detectors? Tim

Here is his last know address: Larry Johnson/ 65400-065 Federal Prison Work Camo P.O. Box 6000 Sheridan, OR 97378 Tim

My dad used to run 9s in a SBC 2 bolt with a blower in an old Chevy II.....food for thought. Tim

The stock Z suspension has no adjustment that would significantly affect pulling to one side (caster and camber). Try swapping the fronts wheels left to right (tire wear can many times affect pulling to one side, even new tires can do this!!). As John said, check your TC rod bushings for wear and replace if necessary. Check your rotors for thickness (even both sides), and runout. Also, if you haven't done so already, replace the flexible brake lines, if one side is bulging, then the brakes won't be as effective on that side, and check that the hard lines aren't kinked somewhere. HTH, Tim

I say DO IT!!!! Tim

I would bet the MC is bad. Replace it under warranty. Tim

Is the fluid level dropping? Did you replace the soft line at the slave? It is not impossible that the slave that you got is bad. Was it new or rebuilt? Take it back and tell them it's bad and get a new one (under warranty) just to be sure. Also, make sure that the peddal adjustment is good. You should have about 1-2 inches of play at the top before the rod engages fluid action. Tim

One problem with those seats, and I admit they do look nice, is that at a good price, and sold at such an omni present outlet as Pep Boys, every Tom, Dick and Harry are going to have those seats in their rice mobiles, which would make it look like a ricey Z car in the long run. At least with MOMO, Spearco, Corbeau etc, the price puts it out of reach for the low buck ricer boys. That said, I may buy a set for my second 240 when I get around to dropping in the ZXT motor from my 83. Tim

Thure....I use a very similar recipe, but I don't care for the Feta cheese. Instead I use swiss (love the flavor and texture), and a little brochutto ham (hope I didn't butcher the spelling too bad), it's has a nice salty flavor, so I don't add any more seasonings. I also prefer fresh mushrooms, and some very thinly sliced tomatoes (on the top of the omelette after it's cooked so the tomatoes don't get hot). Also I don't add milk to the eggs...about 1/2 a teaspoon of condensed milk, and one extra egg white. Hmmmm....I guess our recipes are completely different!! Yummmm.....me hungry now!! Tim

You'll probably have yours done before mine......as soon as I think I'm on the home stretch, somethin else pops up that I hadn't anticipated..... Tim

Yeah...read that again....words from the wise!! Tim