stony
-
Posts
4361 -
Joined
-
Last visited
-
Days Won
7
Content Type
Profiles
Forums
Blogs
Events
Gallery
Downloads
Store
Everything posted by stony
-
OK sorry for the suspicion can’t be too careful Any pics available?
-
Hmmm one post???? anyone know this guy????? sounds like a scam to me
-
Atn: read this first or risk being tarred and feathered!
stony replied to Bob_H's topic in Nissan RB Forum
Yep -
No sorry i havent. prabably wont happen now till i get back in november from singapore
-
-
-
-
-
-
-
-
This feb will be 4 years.... but whos counting.
-
not much visually but all teh cage welding is done and all teh final body cutting is done almost and some sheetmetal is completed. compare with pics above. My car is blocked out fro the entire month of october and should be ready for wiring in november
-
Wont fit with a front sump. you have to use the rear sump pan.
-
I removed the baffling also but my pan still hit the girdle. i also had to beat out a small section where the sump bolts in to clear the pan. then had to use some different bolts to clear the small hump i neat out. (cant see that in this pic)
-
Here is a pic of what i had to do to get the bearing girdle to clear my pan.
-
-
I bet you couldnt:nono:
-
Sterring rack problem can be solved by swapping ovcer to the US spec one right? You have a PM
-
I am very familiar with what is required for the rb20 pan onto the rb26 i have done it. thanks for the info
-
I'm gearing up for a rb26 swap into a s13. you say the crossmember has to be changed??? i was under the impression that the gtr oil pan with the diff cut off will work????? Is this incorrect? Sorry guys, he caught my attention with that little piece of info
-
the difference is about 1000HP!!!!!
-
-
Oh yea performance wise there wont be a stock of the floor sports car that you cant beat. within reason. im talking vipers, vettes,cobras supra 350z ect ect even most of those cars will need to be modified quite a bit to keep up. Mine was running 11.1 @ 127MPH in the 1/4 and still pulling real hard. I crossed the line in 3rd gear ( 5 speed tranny) at 7200rpm. A properly setup chassis will be capable of 150mph+!!!!!
-
A stock 400whp rb26 in a 2700lb 260 Z is absolutley insane. If you have never driver a fast car you wont be ready for this. BE CAREFUL:D