Jump to content
HybridZ

stony

Super Moderators
 View Profile  See their activity

  • Posts

    4361

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by stony

  1. stony
    Common dude really???? this is primarily a Z site. no one here will really dog you out for asking the question but you really should ask that kind of question on a honda site. i don't like hondas in fact my laptop wouldn't even open the links you posted:mrgreen: The last place i would go and ask for what kit looks good on my Z would be a lets say a Cummings diesel page. Same thing here.
  2. stony
    thanks.... It's almost too hot to do anything outside. supposed to be 100 today!!!!
  3. stony
    I usually put my pickup on the manifold. this will give you accurate boost pressure actually getting to the motor. this is also where most guys hook the boost gauges into
  4. stony
    SNCOA and yes it is alot of reading IF i do it
  5. stony
    Other then being on Okinawa this is the first time since i left Okinawa that i have felt this kind of heat. 135 at nellis does not compare to this kind of heat. It was 95 here yesterday and you could see the air Hope it doesn't get too much hotter my sweat glands are working overtime as it is!!!!
  6. stony
    Damn its hot and humid here!!!!
  7. stony
    Dan , Remember my car is a drag car. With 31 inch slicks I have deflate the tires and lower the rearend out Of the car. I want to be able to install the tires with stock wheel openings without it being a major deal. Sorry was on the i phone earlier grammer and typo's corrected
  8. stony
    Is there anyone running that size tire ?? My question is will it fit in the stock 1/4 panel opening??
  9. stony
    If you helped him then obviously you are near him... go talk to him and get it cleared up and be a grownup about it.
  10. stony
    Z's also have rust issues in teh area under the dash in the area where the wiper motors go. had a pretty bad area fix on my old Z and that fixed the water issue
  11. stony
    Will be here for 6 weeks. anyone in the area and /or know of any Z events. Found Montgomery motorsports park right down teh street from where i am so that is cool ... anything else??
  12. stony
    What your doing is almost exactly what would need to be done to a Z to use the gtr front suspension (awd). I plan on trying this sometime in the future. Dont think i need to say what that would do to a Zs performance That along with the TTT rearend setup with a gtr rear diff Those wheels look good.
  13. stony
    Mine was a shell. had a dash but no stuff under it other then gages. the interior had 2 seats, and there were no other accessories on the motor other then what it need to go. I dynoed mine at 392rwhp and the best MPH it did was 127MPH. to get the Calculators to match i input 2500 lbs and it came out dead on.
  14. stony
    anything will fit with the right tools and enough money
  15. stony
    No i love my car... would do it all over again. BUT If you are worried about how much the swap will cost...dont bother. I love the way it sounds i will eventually put a small muffler on it just because i love the way the motor sounds at full song with the waste gate wide open!!!!
  16. stony
    Never wieghed it but if the HP calc are close it was around 2500lbs
  17. stony
    I count atleast 3 different Rb guys including myself saying LS1... thats should say something. Your looking at 10K plus to have a good built rb26 500 + rwhp. that is not a joke BTW i did mine 10 years ago in japan before the rb26 started getting real popular and it still cost me close to 10K. that was using a stock rb26,r33 tranny ect ect
  18. stony
    16 AN for the 2 normal ones and a -12 for teh swirl pot return Should be 2100lbs +/- 1-200 lbs
  19. stony
    Little update. With the lack of room in the back i decided to put the battery back in the original location. the stock frame rails are now tied into the cage floor, and the intercooler radiator and motor are all mounted. by the end of the week should have the floor sheetmetal done. I'm headed to alabama for school for 6 weeks so i should be ready for pickup when i get back
  20. stony
    LS1!!! It will be cheaper in the long run.
  21. stony
    No hurry i just have a set of Bogart wheels that i got pretty cheap and just wondering if im going ot need a spacer. right Now i have z32 calipers on the car and i need 2 inch spacers to clear ther wheels:icon56:
  22. stony
    I'd start your own thread in the chassis section with lots of pics. you can host pics on photobucket.com or here on hybridz
  23. stony
    Same here. BTW way to raise the dead ;>
  24. stony
    first before on okinawa. after once in the US
  25. stony
    Anyone?
×
×
  • Create New...