innerware

Really make sure that thet electrical connectors are aorking right. They get supper corroded and brittle. You can replace them for like 8 bucks a piece and I believe it is bosch that makes them. Motorsport auto sells them too. I did this cause mine was running like dodo and replaced my injectors eventually too. Not hard work but the injectors can be pricy. Make sure too that you have fuel pressure from the pump to the filter and then after the fuel regulator. Maybe a clogged filter or bad regulator or even a bad pump. Injectors might be fine. But I bet the rubber on the clips is all rotten.

my old tired non modified 280z has hit 110 a few times on empty freeway. I only have 4 gears and could probably go a little faster too. I still had 2k rpm left but untill my suspension and brakes get done (this month) I wouldn't even think about it. By the way do all your windshield wipers start to lift at around 11omph? Mine do...

I don't think it is still being sold. And why would you want it since JTR has a much better kit. Even motorsport auto has a kit better than the Scarab kit. But everyone here recomends the JTR kit. Mike Knell is real easy to deal with too.

Damn Peej, you are doing a ton of work to that Z!! Nice work. It is going to be one stiff mofo. I like everything so far.

Just received the set up from Ross at modern motorsport yesterday. So in a couple of weeks I will have the Toyota 4x4 set up in front. I am just rebuilding the drums in the rear for now. I still am an inliner so that will suffice for a while.

You'd have to be careful where you parked it. Might just loose it in the woods, or field.

If he really got hit, then that isn't funny!

if it doesn't run and has a bit of rust that you can see (there is more hidden) than 500 tops. I got mine for 900 and it ran the hour home. Should have bargined down to 600 too. So a few hundred but not too much more. But I live in cali where there are a ton of them.

That is definately cool. It was posted a few weeks back though. But always good to see just how talented people are.

No matter what you do, if you are happy it is awesome. I do think it looks good now and is way better at not scratching. So peace of mind for later on is a good thing. The blue was nice though. But good job, it looks great.

I think #2 is rear defroster. You could unplug and then multimeter test the back window. But you probably want to keep it.

Hey datsun327 check out the first link in the post above you and scroll down to the bottom, there is a link for a wiring diagram that should answer your question.

I'd personally use a seperate switch and relay.

check out this link: Im sure most have seen it:http://mywebpages.comcast.net/pparaska/Headlight_Relay_pg1.htm also: http://www.danielsternlighting.com/ I bought my relays through this guy. He was easy to deal with. Haven't installed yet (grad school) but everything is there except for the wire.

Thanks for those posts, that stuff from pals looks like all the other stuff that I have seen but for like half the price. Awesome

Just wanted to say that really sucks about Rodney Dangerfield. He was definately a funny as hell man. Oh well that's it.

very cute if that is what you'd call it.

It will all come down to what it is you are looking for. Easy install, high horsepower, high rev, light, cheap, carbed, FI, new, old, etc etc. Get the bible( V8 conversion manual written by Mike Knell from JTR) he documents what I would call the easiest swap with a non nissan engine that I have heard about. But I feel from reading stuff here that it is all a matter of opinion. I don't think two people here have the same engine exactly in there car that isn't stock.

For younger children, I have to agree. Sorry.. I was going to say it was stupid too at first but after reading that it is for the younger crowd it does make sense. I know I know, we are breading a bunch of pansies. It should however only be used on elementary school kids. If we can guide them to learn better then yes. When they get older it should be red red red. I don't know, just my dumn ass thoughts.

35

we need a way to tell those asses at the school they suck. I just can't freaken believe it!!!!!!! He has every right to be on the board!!!

Yeah, it is not a wax at all. I've used the stuff before and it is great. It is actually polish with a grit in it. So it is kind of like super water sanding something. It is what is used on lexan canopies for airplanes. A budy of mine worked on Harriers in the service and use the same polish. Nice work by the way, those came out awesome.

cracked distributer cap?

Check to see if the intensity is as bright in all the bulbs. Sometimes a bulb will only half go. So when you have your lights turn on it wants to burn brighter and use all its filaments. So, during the day it doesn't blink fast since the turn lights aren't as bright. Something like that but I have seen it before.

Well, I guess the price for an old porsche just went up a little. Wouldn't want to be that driver though. Ouch!!