Jump to content
HybridZ

mrcheeze36

Members
  • Posts

    266
  • Joined

  • Last visited

Everything posted by mrcheeze36

  1. Yeah, i was also thinking Porsche-like in the rear, and kind of RX-8ish in the front. Not the best pic-mod as I did it quickly in MS Paint, but just did it to give a quick visual.
  2. I like the body, just not feeling the lights. They seem rather large or awkward looking. I did some quick changes with MS Paint to cutoff the lights in some areas...
  3. Very nice! btw, was your 06' G35 VQ from an auto car? The 05' - 07' manual G35s have the Rev-up motors.
  4. he's going to use the 350z stock electronics and DBW
  5. mrcheeze36

    z32 diff

    Correct. Twin turbo Z32s came with R230s, while the NA Z32s came with short nose R200s
  6. I agree. I believe the VQ35HR, VQ37HR and the VQ40 all use the same block (taller block than the VQ35DE).
  7. My mistake. I was thinking of how the Z32 tranny to L-motor adapter that 240hoke makes was made for Z32 NA bellhousings (since the NA and Turbo bellhousings differ in starter location) and that adapter requires cutting the bellhousing. Does your adapter require any modification to the bellhousing for the adapter?
  8. Which Z32 bellhousing does this work with? (NA or Turbo)
  9. Check this thread out: http://forums.hybridz.org/showthread.php?t=137317
  10. I believe this is a repost, but a nice video none the less
  11. No they are different. TLs are bi-xenon (low beam/high beam) while TSXs are xenon.
  12. Hi Dave, Here's a few threads I found on hbz that might help: From post 16 of the VH45de questions thread: For the VH45 I believe VVT was only availlable from 90'-95' (see post 16, 24, and 25 from the VH45de questions thread) VH45de questions http://forums.hybridz.org/showthread.php?t=96538&highlight=vh45 See post 7 of this thread which compares the US VH41 to the US VH45: VH41/45 external differences http://forums.hybridz.org/showthread.php?t=126375&highlight=vh45+chain
  13. he's using the stock VQ35 harnesses, ECM, BCM, etc.
  14. Actually its the 74' 260Z 2+2 with the 3.36.
  15. Shipping info sent via PM a few minutes ago
  16. 680cc injectors are from a GSL-SE and they look like this: http://cgi.ebay.com/ebaymotors/Mazda-Rx7-84-85-GSL-SE-Fuel-Injectors-2_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ6763QQihZ021QQitemZ310016240125QQrdZ1QQsspagenameZWD1V The ones in the pics in the link you provided are more reddish or faded red.
  17. I didn't see your post until now. I'm in for a set. Please let me know if I made it in on the first run and the total amount I need to send including shipping to zip code 90260. Thanks!
  18. and Marc Jones when he owned Datsun Alley.
  19. Hubs are the same (32 spline count on the inside of the hub). Look for posts by JAMIE T in this thread: http://forums.hybridz.org/showthread.php?t=100758&highlight=q45 Axle shaft lengths might be slightly different but it doesn't matter since they'll be swapped out anyway.
  20. I bought the $500-$600 wii bundle from Walmart a few months ago. It came with an extra controller, nunchuck, accessory of your choice from a list, and 5-6 games. I ended up returning everything except for the console. Ended up being about $280 - $300 (I forget the exact number...which was basically shipping and tax).
  21. Any plans on making extra? (shifter relocation stuff, modded crossmember, etc.)
  22. Check out post# 48 and 50 by RIPSNZ: http://forums.hybridz.org/showthread.php?t=124555&page=3
  23. Correct. The NA and Turbo Z32 manual trannies are the same...the only difference is the starter location on the bellhousings.
×
×
  • Create New...