Horatio Posted January 6, 2009 Share Posted January 6, 2009 I ordered an inner rear fender well from Tabco yesterday. The guy I placed the order with said they've noticed a large increase in the interest for replacement body sections for the S30. He asked what areas would be MOST useful and asked if I could send some photos. Sounds like they may consider making some more pieces. I explained definitely the battery tray area, battery support and the rear deck area, floor pans, etc... Any other suggestions? Attach some pictures if you can so I can send them his way. Quote Link to comment Share on other sites More sharing options...
ArnZ Posted January 6, 2009 Share Posted January 6, 2009 Here is one that needs some parts Quote Link to comment Share on other sites More sharing options...
EvilC Posted January 6, 2009 Share Posted January 6, 2009 Lmfao Quote Link to comment Share on other sites More sharing options...
ncfisher Posted January 6, 2009 Share Posted January 6, 2009 full door skins would be nice Quote Link to comment Share on other sites More sharing options...
Montezuma Posted January 6, 2009 Share Posted January 6, 2009 full door skins would be nice I second that. Quote Link to comment Share on other sites More sharing options...
Globerunner513 Posted January 6, 2009 Share Posted January 6, 2009 as far as MOST useful, i would agree with the batery tray area Quote Link to comment Share on other sites More sharing options...
Challenger Posted January 6, 2009 Share Posted January 6, 2009 Just for what its worth, tabco makes all their stuff by hands (atleast last time I got something from them) The stuff isnt stamped so their limited on the things they can make. Quote Link to comment Share on other sites More sharing options...
S30TRBO Posted January 6, 2009 Share Posted January 6, 2009 Here is one that needs some parts This one too: Seriously though dog legs, rear inner and outer wheel well arches, rear hatch panel, lower front fender panel. Quote Link to comment Share on other sites More sharing options...
Challenger Posted January 6, 2009 Share Posted January 6, 2009 And thats a 2+2. They didnt make the panels for the 2+2... Quote Link to comment Share on other sites More sharing options...
Horatio Posted January 6, 2009 Author Share Posted January 6, 2009 He mentioned talking to his "press" guy so i'm pretty sure they're pressing now. Plus, the rear quarter front section i ordered receltly looked like it had press marks on it (did'nt look like hand forming at all). Door skins is a good idea!! How 'bout we come up with a list of pieces that are needed but cannot be found and i'll send those to him. so far we've got: Door skins Battery tray area Battery tray support how 'bout seat mounts/supports? Quote Link to comment Share on other sites More sharing options...
Horatio Posted January 6, 2009 Author Share Posted January 6, 2009 This one too: Seriously though dog legs, rear inner and outer wheel well arches, rear hatch panel, lower front fender panel. dog legs, inner and outer rear wheels wells and lower front fender panels are already made by tabco. How 'bout the firewall area behind the battery tray? Quote Link to comment Share on other sites More sharing options...
rags Posted January 6, 2009 Share Posted January 6, 2009 What about rockers? Joe Quote Link to comment Share on other sites More sharing options...
junglist Posted January 6, 2009 Share Posted January 6, 2009 Definitely the rear sill piece that is just above the taillights/license plate area is a piece that needs to be available. Quote Link to comment Share on other sites More sharing options...
Xnke Posted January 6, 2009 Share Posted January 6, 2009 Yes, the rear sill piece. It was available from Zedd Findings for a little while, but now there are no more. Very difficult to form by hand, a very simple part to press. Quote Link to comment Share on other sites More sharing options...
Magnum380Z Posted January 6, 2009 Share Posted January 6, 2009 Here is one that needs some parts shittlelbuffout Quote Link to comment Share on other sites More sharing options...
PR280z Posted January 7, 2009 Share Posted January 7, 2009 The radiator support would be nice. Quote Link to comment Share on other sites More sharing options...
rturbo 930 Posted January 7, 2009 Share Posted January 7, 2009 dog legs, inner and outer rear wheels wells and lower front fender panels are already made by tabco. How 'bout the firewall area behind the battery tray? Their rear lower quarter patch could use some improvement. I got a rocker, doglegs, and the rear lower quarters, and they do not fit, AT ALL. Reminds me, I still need to do something about that... Anyway, battery tray as mentioned, maybe the tail light panel under the hatch sill - whatever it is that piece is called. Lower radiator support? I think the battery tray might be the only piece commonly rusted out they don't make. Quote Link to comment Share on other sites More sharing options...
Dayz Posted January 7, 2009 Share Posted January 7, 2009 Perhaps a Roof Skin...Easy to press! I know I would buy one. Dayz Quote Link to comment Share on other sites More sharing options...
NCchris Posted January 7, 2009 Share Posted January 7, 2009 What about rockers? Joe They already offer rockers, I'm installing a set now. Quote Link to comment Share on other sites More sharing options...
madkaw Posted January 7, 2009 Share Posted January 7, 2009 I wasn't happy with the tabco stuff I used. It did not fit well. Maybe they should work on perfecting the stuff they sell now! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.