Jump to content
HybridZ

hoov100

Members
 View Profile  See their activity

  • Posts

    1503

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by hoov100

  1. hoov100
  2. hoov100
    easy or inexpensive eh? SEARCH, i have been reading for almost 4 years now and i am almost done with the sticky's!!!
  3. hoov100
    i would stay away from z32 injectors, they tend to leak and go out every couple of weeks.
  4. hoov100
    does it matter what gear or RPM its at? is it shaking through the steering wheel? or the entire car? the violent shaking upon sudden acceleration could be do to your EFI or ignition system. Have you checked the drive shaft/half shafts?
  5. hoov100
    road atlanta, hands down.
  6. hoov100
    do you have an electric or mechanical speedo sensor on your trans?
  7. hoov100
    lmao, nice, might need to do what Frank does and load up a shipping container or two to bring back goodies.
  8. hoov100
    so are you saying if i give you the money, you'll bring me one back next time your in japan?
  9. hoov100
    just ratchet strap it to the back bumper upside down....... all jokes aside, we need to know what class your going to be in.
  10. hoov100
    looking good, but whats up with the roll bar?
  11. hoov100
    front sway bar and aero are going to play the biggest factor in high/er speed corning if you have everything setup correctly. You should do some reading on the s30's aero problems in the wind tunnel forum.
  12. hoov100
    you didnt cut the tops off of the strut towers without measuring them first did you?
  13. hoov100
    no luck, all where missing.
  14. hoov100
    going to the yard's tomorrow, I'll see if they have any.
  15. hoov100
    dont forget the x-pipe!
  16. hoov100
    the 010 blocks bring in some decent money if they are decent, i would try and sell it on a vette or GM based website, as apposed to tossing it on craigslist or ebay. dont know what the normal market price for a 327 with a 010 block is, but the last three i bought where $400 each as low mileage short blocks.
  17. hoov100
    alright, not much of an update, but i got the exhaust finally, gonna start cutting it up and welding it together and then port it. I can see the light at the end of the tunnel!!! its going 3" from the collector back and Im dumping it at the end of the x-pipe. also found a temporary solution for the volt and fuel gauge.
  18. hoov100
    if it makes you feel any better, i lost $600 in a counterstrike source tournament. (those cheating bastards)
  19. hoov100
    why would you use RTV silicone as an exhaust manifold gasket? If it makes any difference i have always liked using the reusable aluminum ones from autozone.
  20. hoov100
    the black cover that covers them, or the housing that the bulbs go into that connects to the taillight lens?
  21. hoov100
    been there done that! its not so bad, as usually you never hear from the owner or see the car again, also they usually tend not to do anything with them, except drive them (some times)
  22. hoov100
    Ive got an 3.54 gear set from a z31 that i can sell for $45 shipped
  23. hoov100
    lol, counter strike source, half life series and portal.
  24. hoov100
    harder to cover up? running a 1-2 gauge wire next to the tail light harness is hardly going to need any "covering up" as opposed to just throwing it under the carpet.
  25. hoov100
    find some mechanical seat rails and bolt them up? you really arent going to notice the 3 pound diference between stock and z32 seats.
×
×
  • Create New...