Jump to content
HybridZ

Evan Purple240zt

Members
 View Profile  See their activity

  • Posts

    1607

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Evan Purple240zt

  1. Evan Purple240zt
    Why didn't you just make 10 as loud as 11? But, it goes to 11....
  2. Evan Purple240zt
    First off which trans? RB25 AND RB20det trannies will accept a z32 or a 240sx speed sensor. The pulse count is different between the S13 and S14 speed sensors btw. Should be able to program any aftermarket speedo to work with these. I know for a fact that the above statement is true for the rb25 trans because I did it in my 240sx. Evan
  3. Evan Purple240zt
    Ahhh I see. Thanks for the education. Evan
  4. Evan Purple240zt
    My flange is warped BEFORE welding LOL. Thanks guys! Evan
  5. Evan Purple240zt
    Avoid those guys, I have heard bad things about them on the 240sx boards. Evan
  6. Evan Purple240zt
    7.5 width +20 offset looks crappy on 240sx's but fits I guess. The zcars are much more picky about offset in my experience. Evan
  7. Evan Purple240zt
    Not sure if this applies here, but I have seen pictures on the net of cheap rotors that have cracked between the crossdrilled holes. Evan
  8. Evan Purple240zt
    Hey mike, is that a stock mustang brake setup? I wonder if I can make the mustang brakes work on my S14. Just pondering, I have a caliper that just decided to start leaking. Evan
  9. Evan Purple240zt
    If the sound is the problem, cut that muffler off. I ran 3" with a dynomax race magnum. Garrett has that exhaust now. Sounded good IMO. Evan
  10. Evan Purple240zt
    excellent!
  11. Evan Purple240zt
    I think its going to be a major headache making that fit. Have you tried mocking it up on your motor real quick? I am very curious to see what it looks like! Evan
  12. Evan Purple240zt
    Alright, I got my new downpipe tacked together and ready for a full weld job. I have to weld in the O2 sensor bungs too, along with a tube for the dump on my wastegate. Now my question, my turbo flange is NOT flat at all, and it seems that nobody makes a gasket for it. Is it common practice to have the mounting surface machined flat after welding etc.... There is no way this won't leak without it. Thanks - Evan
  13. Evan Purple240zt
    http://www.nicoclub.com has a list of legit importers in the rb section.
  14. Evan Purple240zt
    The top parts you have listed with the fuzz go inside the stainless trim for the window on the door. Evan
  15. Evan Purple240zt
    Awesome!!! Great idea. Thats why I try to hang onto as much junk as I can LOL
  16. Evan Purple240zt
    Thanks guys, the drill press is at work. The maintenance guys at the building where I work are very cool so they will let me use it. They seem to know what they are doing, maybe Ill just ask them to do it for me. Evan
  17. Evan Purple240zt
    Tony, what do you mean by welding washers into the tubing? Thats scary, cast cage! Death wish. Evan
  18. Evan Purple240zt
    Your attention to detail is amazing. Nice job. Evan
  19. Evan Purple240zt
    Yeah I agree with all of the above. Sandblasting is miserable LOL. Evan
  20. Evan Purple240zt
    I know the stock RB25DET turbo will shoot its blades off around 14psi on an RB motor. I don't think it would be a good way to go. Evan
  21. Evan Purple240zt
    Wonder how it would feel to be beaten to death by your own roll cage? That seems like it would show ya. Evan
  22. Evan Purple240zt
    Thanks warren! Evan
  23. Evan Purple240zt
    Alright, I really don't have a good way to jig it up so its gonna take a bit. Can I drill with a holesaw without using a pilot bit? This manifold is divided, and I am cutting the hole where the pilot bit would not be able to penetrate completely so it would be drilling pretty deep for no real reason. Evan
  24. Evan Purple240zt
    Thanks Warren, this is gonna be some work definitely. Ill have to get the right size hole saw. To complicate things, its not really on a flat surface. Evan
  25. Evan Purple240zt
    I do have a big drillpress at my disposal. This cast iron exhaust manifold is one hard dude. Any tips or tricks? I am cutting a hole for a pipe to add a wastegate. Evan
×
×
  • Create New...