Synlubes

Thanks Mike and Jamie!

titanium, Could you post some pics of the bottom side and the area where the hinges mounts?

Modern Motorsports, also there is a member here (username jamieT) making 5 lug hubs and a brake kit. sorry if i left any others out Do a search here and you will find lots of info on this subject. Welcome to HybridZ!

The best solution would be as described at alteredZ I have seen some lighter duty (but nice) frame rails sold on ebay. These would work if you just wanted to tie in the rear with the stock frame rails.

Thanks to all you "old timers" for getting all this started! And for putting up with all the shmit along the way.

Didn`t Stony do the Z31 front strut mod? Do a search on username "Stony" and see what comes up.

Amsoil also offers a prelube system. Ck out the url below and then the new products page.

It is MSA part #10-2003 .460 lift 270/280 duration It`s a nice mid range cam for a basicly stock streetable engine The next cam will be in the range of .495 lift 290 duration with a bit more motor. You being in Fredericksburg, you should (if you haven`t already) make contact with Mike Kelly. He lives in Fredericksburg as well

I have used a Schneider cam for about 10 years. I just took in engine apart and after unknown thousands of miles (and good oil) the cam still is in great condition. I`d buy another one of their cams if I needed one.

I`ve got some interior parts if needed. That just sucks!!!

Were you referring to Discount Tires Direct for those wheels? They will look very nice on a white Z.

The link John posted didn`t work so I don`t know what it said, but I am for doing something. IF it can / will be enforced. At any intersection there will be someone blowing thru the red lite. I see to many looking around as they go thru the light, knowing they could have stoped for the light. A red light runner crashed into my parents several years ago, the runner didn`t even get charged with anything. Pisses me off! Give me a rocket launcher, I`ll take care of those a$$ wipes!

Sweet! I want to come see it!

I get 13" (rear) from center wheel to fender lip. Can`t measure front, no motor in the car right now. Mine is lowered a bit and MSA aftermarket springs (don`t waste your money on them). If you have 2+2 springs, you can cut some coils off to lower the car. If they are old, might be better (time spent) to just get some new aftermarket springs and start from there.

You might want to change some fluids!

I just adjusted the fitting in the back of the cly head.

Look for a early 240 flywheel, they are a little lighter than the later models and put the money in the diff. Sorry, I don`t know the total wieght difference. Just a couple of pounds or so. But, it`t rotating wieght!

I`ve seen alot of "no longer avalible" rubber items on ebay lately. Try Courtesy Nissan??? Classifieds on other Z car sites???

There are several members here who have done some very nice work. Search thru this section (body kits and paint) as well as do a search. Welcome to Hybridz!

Anybody have any answers??? This really annoying.

Where is the weber sticky we use to have???

Nice write-ups / documentation Larry. Both front and rear. What’s everyone’s thoughts / opinions on making these links a sticky?

Operator Error. . . Good that it was something simple. Let me know when your ready to install. 11 inches of snow here today, did you get any?