Search the Community
Showing results for tags 'Nissan'.
Found 14 results
-
Hello Everyone, I bought a 1971 Datsun 240z, about 2 years ago as my first project car. The more I started to dig into the car, the more I wanted to repair and improve it. Initially I was just planning on getting it running and using it while slowly upgrading and repairing it. I ended up tearing it down to the bare chassis, mounting it on a rotisserie and media blasting it. After I media blasted it, I decided to replace the floors and upgrade the frame rails with baddog frame rails. I sat down and thought about what I wanted the car to be and I came up with a ton of ideas, but ended up narrowing it down into one vision. The vision is this(nicknamed ProjectWhiteNoiseZ): My vision is inspired by modern Nissan Nismo styling, but it will be powered by a 2JZ-GTE with a cd009 transmission. I have gone through every part and media blasted and powder coated it or upgraded it with something better. Doing all of this, inspired my brother to buy a crashed 2008 Mustang GT and the current plan is to complete our cars by August/September '18. I live in Colorado and he lives in Pennsylvania, so I'll be road tripping the 240z 1700miles each way when complete to meet him at a track in Pennsylvania and race. If you're interested to see the work and follow our journey to complete our cars over the next few months, we have a YouTube channel, Facebook, and Instagram where we're documenting our builds. Any comments on suggestions for YouTube video improvements are appreciated. We will answer any questions you have. YouTube: https://www.youtube.com/channel/UCJt7v6VEHBqNPweO_cZ1guw PBB Instagram: https://www.instagram.com/projectbuildbrothers/ PWNZ Instagram: https://www.instagram.com/projectwhitenoisez/ Facebook: https://www.facebook.com/ProjectBuildBrothers/
-
Hello all, I am looking for a 1996 Nissan 300ZX 4 passenger Driver side window. Please, contact me at your earliest convenience. Thank you.
-
Version V1
50 downloads
Simple roll center calculator for the Z car based on measuring the angle of the control arm. I tried to list all the definitions and assumptions. Please drop me a comment if you see any errors or improvements. I checked it against my professional software and got the same values when using the same inputs so I think the math is correct. -
Hello, My name is Joey, and I am looking to start a dream project. Thing's I care about: -Little to NO rust -Title/Paperwork Thing's I don't care about: -Engine Please contact my gmail @joepez56 or via text @773-719-9133 (Please do not abuse my info, I only am giving it because I will resond faster to those)
-
We have been speaking with BC Racing to create a coilover system for the 280ZX We already have a 1980 ZX to use as template but we wanted to know what are things that customers would be interested in like extreme kit, camber plates and other. We also wanted to know if there's any difference between years or models on the 280ZX. Please let us know if there's any interest so we can make this happen.
-
Gather around folks I'm building my dream car. Some may know me here, some may not. I've been building nissans for 15 years now. My last personal build started in 2009 on this forum but I stopped documenting after 2011. I just sold my entire setup to my best friend, which I also sold my 2nd 240z too. So I'm starting to document a new chapter in my build. I tore down my black car and we are completely rebuilding my friends orange one better than ever. The original setup was amazing, never let me down. R34 NEO motor, GT35R, Tein coilovers with edfc, clsd, axles, wilwoods.... etc. This brings us to my new build and it's current state on my rotisserie waiting to get massacred. I'll post some photos and get this ball rolling Donor car was an ever so gracious R33 GTR Vpec, 90% of parts came from the same car. I will be grafting front and rear sub frames into my Z chassis, including the AWD system, Brembos, suspensions (tein), Axles, Diff, etc from the GTR... I've even gone ahead and gotten the GTR pedel set and Master so she should feel as GTR as possible from inside. Steering column, steering rack all modern and hydraulic (and left hand drive ) I've collected 90% of the bizarre hardware associated with the awd system too. Also will be doing GTR gauges, chassis strengthening, new wiring, wheels, so on and so forth.... My old car was quite the track beast, I intend to make this one deadlier than ever. More so I just love building so I'm doing it Grab some popcorn, this ones going to take a minute!
-
Hi guys I am looking for a LD28 Crank from a nissan maxima.
-
I have two 50th anniversary keys that are uncut for sale in the oem box from Nissan with plastic wrap still in tact. One is sold. Still have one left. Need these gone asap for bills ):
-
From the album: 1974 260Z
-
From the album: 1974 260Z
-
Hey Zers, My Dad passed a little over a year ago and in doing so, told me to take care of his old Z. its an 82 280zx n/a. well,i didn't no to much about cars at the time but i know he said to keep the engine that was in it (didn't have to be stock). so after much reading and tons of "old Mechanic" advice,iv since rebuilt the entire engine. here is what i have done "surprisingly my self" so far.... Head (work done by Rebello) - N42 head, bigger valves,port,polished,some work done to the galleys for coolant and oil. Valve Train - Custom cam 512 Lift, 300 Duration, Stiff springs, new Rocker Arms/Lash pads.new timing sprocket/chain. Block- 0.60 over,JE Flat Top Pistons,Lightened and balanced crankshaft,new Barrings. CR- just at or slightly under 11:1 on 93 Octane, Timing *19 Int and *38 Full at WOT. (No Ping!) 220-240 psi Ignition- Modified Distributor (New Dizzy and Dizzy shaft), Full MSD 6AL-2 Ignition with Blaster-2 Coil Intake- Triple 44 Mikuni Carburetors Exhaust- MSA 3-2-1 Headers into a 2.75 inch,no Cat,Dynojet Ultra flow muffler. Drive Train- Auto to N/A 1983 5 speed,Aluminum flywheel/Drive-shaft, R200 4.11 Differential from 200sx Other- Turbo oil pump,new alternator, new battery,New *Champion 4 core Aluminum Radiator, Tires- Rear : 245-60-14 fronts are 205-60-14 -- Well that's pretty much it.i gutted the dash,all A/C HVAC stuff,no spare tire,12lb race seats,11lb CF hood, Custom Aluminum bumpers (look stock),all digital oil,fuel.air ratio,volts gauges.Steel pillar louvers from 81' ZX as well as the 130mph speedo. I havent had it on a dyno yet for max tuning or ran the track but it takes my buddies mildly modified 86' FoxBody Stang all day until i hit 135-140 mph,then wind resistance goes to s**t..but i can max out my speed around 6,800 in 5th gear,7,000 with some tuning im sure. 0-60 times are crazy,1st hits 38mph like intantly and 2nd hits 58mph not much slower,3rd hits around 80 pretty fast,4th is like my OLD 3rd but tops around 110-115 (speedo isnt to accurate around 100 so) 5th pulls nice all the way to redline. Post comments and let me know what you think. Estamated HP? P.S- Going from my auto gear of 3.54 to the 200sx diffy of 4.11 was an incredibly large difference in acceleration,car sounds like a F*****g Indie car lol! also vary streetable with the big cam and lower geared diff. wasn't to fun on the street with the 3.54 and that cam profile.
-
Hi there i have looked a bit everyone and dont know quite whats wrong and how to get my speedo working. My dash cluster is new and 100% working. But still my speedo doesnt move i was told its due to having a rb20det tranny which uses a mechanical speedo while the cars rb25 requires an electrical speedo. I was told that by putting in a rb20e r33 speedo drive would resolve this . Im not too sure on how accurate this is and Id like any tips or ways to resolve the issue. Preferably not too expensive. Im sure many people have done this b4 looking for how to get the speedo working again . (NOTE : previous owners dropped the 20det gbox in , i was told its a small issue but more i looked into it after buying most mechanics have suggested putting in a rb25det bigbox, i dont see the need as the gbox is tight and strong and I am running no modes all stock factory 100,000kms. engine 60,000km tranny ) -
Want good condition ecu. Would like harnesz as well. Looking for maf as well
-
Thought I would actually post my build in the project section since this is a project. As the story goes my 1995 240sx was stolen on 10/21/12. Had SR20DET S15 with the S15 6speed, Nistune ECU management. Tomei 272/272 cams. 750cc injectors, Z32 MAF. AEM tru-boost controller. Ran the J30 dif with abs sensor that I used with a Digital decoder to convert signal for the speedo. Full gauge setup last tune done on the car in July put 305 HP to the rear wheels at 15lbs of boost. Car had working A/C. Fortune 500 coilovers, Isis rear adjustable suspension. Paint and body work done in July as well, Navan front bumper, side skirts and rear valiance. Here is a dyno pull!! http://s158.photobucket.com/user/melbellwood1/media/1995%20Nissan%20240sx/20110923_162204.mp4.html Here is a run at the track!! http://s158.photobucket.com/user/melbellwood1/media/1995%20Nissan%20240sx/20120113_185224.mp4.html The gray 240 is a friend of mines, He runs deep into the 11's at the track makes 390hp runs sticky drag radials all with A/C! Car was recovered 3 days later stripped. Did not have full coverage, my stupidity. Makes ya sick. Now onto the next project. Found thru the internet in Salt Lake City Utah. Car originally bought by person when living in California. Car was originally green and repainted in the early 80’s red. Late model 1974 260Z. Car had updated DGV carbs installed. Western Star wheels and headlight covers with a rear deck louver. Car ran great for short trips to work and out. But my first road trip to a car show about 60 miles away the car overheated on the freeway cruising at 70mph. So switched out for a new radiator and thermostat. First upgrades was a twin pipe exhaust through twin glass packs. Sound is awesome. Power is limited. I was originally going do a head swap, raise the compression and run triple 2 barrels. I wanted to get 200+ hp. After driving the car for 3 months and missing the pull of a turbo, I decided to do a turbo. Didn’t help that a close friend drives a Golf daily with 400+ hp to the front wheels and owns a tuning shop. I decided from research (not deep enough to add a turbo to the 260Z motor because I am over 4 times that cost so far and still counting). Looking it over I thought with intercooler and buying all the parts that I could do this with only about $1500 out of pocket and I would have a turbo driver! HAHAHAHA..... Plans are to be a driver with some track use. Here are some of my trips to time attacks and road course racing. http://s158.photobucket.com/user/melbellwood1/media/Tooquick260z/20130216_150116_zps0eee095d.mp4.html At the point of putting the parts together and driving my car some issues started happening to the 40 year old car. The transmission that worked flawlessly started being difficult to put in first gear (after removal realized it was the slave cylinder no pressure). It developed an exhaust leak, thought it was the new exhaust that I installed. During removal of the intake realized that the #6 cylinder exhaust bolts were gone, yeah missing. Also the head gasket was leaking. I found great deals on all the parts and put them together. Turbo, ECU, AFM, wiring harness etc. Look at the boxes of parts WOW! I located a P90 head and had it rebuilt and flycut. Bought some cam tower shims from Derek, member on hear from Ocala. I put new valves from the 75-78 head with some addition spring spacers got them lined up. Before.... After.... Bolted to the head with cam timing done. Cleaned the engine compartment and painted with a few coats of clear. Looks like a deep dark hole where all the money has gone. Who’s counting right! While this was going on my brother toasted his 1993 300zx by letting the timing belt break, can you say interference. With the tranny going bad(auto) and a/c problems and other issues he decided to part it out. So, I purchased a lot of the parts from him. Breaks, Diff, MAF, Master cylinder and booster, and drive shaft to put in my Z. To put all that stuff on I purchased the rear setup from TechnoToyTuning. Nice stuff. Rear Z32 diff mounts, coilovers with Tokico’s. Old and new clutch, I should hook now!!! Handle the projected 250 HP! So since I had a 6 speed in the stolen car I decided to go with the same tranny. S15 6speed. I researched and found a few people with attempted installs of this tranny but no one had a step by step build. I posted I wanted to do this and a fellow member Xnke (Jacob) said he could help. He said to send the 6 speed with an S30 bellhousing. So I purchases a 6 Speed from JDM Tech of Orlando put them on a crate and sent to Xnke. He then cut the S30 bellhousing and mated it to the S15 6 Speed. Jacob informed me that this is actually a Mazda MX-5 6 speed. he can source and work on these tranny's! Awesome. Here are pics of taking the S30 tranny out and apart. Then with the 6 speed back ready to be installed. Znke even machined the speed access hole for the S30 speedo cable. He got the 4.11 speedo gear that will work great with the Z32 4.09 rear diff. Tranny installed and mounted in Stock tranny mount! Street T installed to run the turbo oiling line. Electric fans installed,,,, Isis 12" fans Stay tuned for the process.......
