Invincibleextremes Posted July 30, 2018 Share Posted July 30, 2018 Parking brake? Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted July 30, 2018 Share Posted July 30, 2018 Yes in the future. First we want to finish the rear end kit. Quote Link to comment Share on other sites More sharing options...
mikolp123 Posted October 23, 2018 Share Posted October 23, 2018 Any new info on this at all? I really hope it's not dead in the water. Quote Link to comment Share on other sites More sharing options...
spitsnaugle Posted October 23, 2018 Author Share Posted October 23, 2018 oi, I'm a terrible person. I hope to upload all my files and designs for anyone else to use/complete. I'll try to remember to do this tonight. Quote Link to comment Share on other sites More sharing options...
Silver Mine Motors Posted October 23, 2018 Share Posted October 23, 2018 We are now testing the entire kit on a S30 with 2JZ motor. The kit fits on and everything lines up perfectly. We just want to put some hard miles on it to see if we need to make any changes before I start producing the first 10 kits for sale. I did not start this thread. I feel like I'm highjacking it. please let me know if You want me to start a new thread? Quote Link to comment Share on other sites More sharing options...
Neverdone Posted October 23, 2018 Share Posted October 23, 2018 I like the custom knuckle. 2 questions 1) Is that an aftermarket wheelhub? 2) Where does the front of the diff line up? in line vertically with your front diff mount, or slightly behind it? Quote Link to comment Share on other sites More sharing options...
DonH Posted October 23, 2018 Share Posted October 23, 2018 Im EXTREMELY Interested in a kit. Quote Link to comment Share on other sites More sharing options...
NC88 Posted October 23, 2018 Share Posted October 23, 2018 Looking good. Testing it out in Iowa I see?? Let me know if you need another Iowan to test parts out! Quote Link to comment Share on other sites More sharing options...
seattlejester Posted October 23, 2018 Share Posted October 23, 2018 I think you deserve your own thread, it has deviated a bit from the original poster and all. Let me know if you want assistance in copying posts and moving them over. For the record well done. Testing and looking for faults BEFORE putting it out there while gathering feedback by public posting. At a good price point I'm sure you will have people very interested. 1 Quote Link to comment Share on other sites More sharing options...
spitsnaugle Posted October 24, 2018 Author Share Posted October 24, 2018 All of my original files that I can find are attached in the ZIP. The bushings were converted and CNC'd by Regal CNC in New Carsile Ohio, regalcnc.com, SUPER REASONABLE prices, especially one off jobs. Highly recommend hitting them up if you want more, since they already have the parts programmed. If someone wants, they can buy this bracket and bushings from me for cost of shipping, plus cost of a case of beer or two. Its about $100 in materials, but just gathering dust in my garage now. FordMount.zip Quote Link to comment Share on other sites More sharing options...
Nelsonian Posted October 24, 2018 Share Posted October 24, 2018 PM sent your way.... Quote Link to comment Share on other sites More sharing options...
spitsnaugle Posted October 24, 2018 Author Share Posted October 24, 2018 (edited) 17 hours ago, seattlejester said: I think you deserve your own thread, it has deviated a bit from the original poster and all. Let me know if you want assistance in copying posts and moving them over. For the record well done. Testing and looking for faults BEFORE putting it out there while gathering feedback by public posting. At a good price point I'm sure you will have people very interested. Though I like outside conversation, its a different design so I agree, it's enough of a deviation to go to its own thread if you could please. 10 hours ago, Nelsonian said: PM sent your way.... PM replied. Edited October 24, 2018 by spitsnaugle Quote Link to comment Share on other sites More sharing options...
LS130 Posted July 10, 2019 Share Posted July 10, 2019 Any updates on this? Quote Link to comment Share on other sites More sharing options...
fusion Posted July 25, 2019 Share Posted July 25, 2019 I too would like to know if this is still going on Quote Link to comment Share on other sites More sharing options...
Tonythefish Posted July 25, 2019 Share Posted July 25, 2019 To me it looks like the sti lsd with 3:90 gears is the way to go . Well documented and parts available. Not the cheapest way though Quote Link to comment Share on other sites More sharing options...
fusion Posted July 26, 2019 Share Posted July 26, 2019 Tony, do you have any links for me to read about the STI swap? Do any vendors sell a kit? Thanks Quote Link to comment Share on other sites More sharing options...
Tonythefish Posted July 26, 2019 Share Posted July 26, 2019 This is the way I’m leaning. Just trying to makes sure they can handle som horse power. I would also upgrage to cv axles at the same time. Check it out. http://www.kangamotorsports.com/blog/2016/6/18/datsun-240z-limited-slip-differential Quote Link to comment Share on other sites More sharing options...
Tonythefish Posted July 26, 2019 Share Posted July 26, 2019 My new project . Thinking lt1 6speed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.