RB26powered74zcar

haha.... the only other guy I saw rack up so many posts so fast was ON3GO.... Mike jumps atleast 100 a week....

I like it..... how bout a link to that ebay seller? Also, what steering wheel is that? Does the red button work as the horn? thanks - joel .

I think all the lines match up and look fine on the rear of your door. I'd say its more to do with the fender needing to be moved toward the rear if possible.... .

The NA Z32 stub shafts plug right into the 88ss VLSD. They didn't seem to be locking into the circlips very well, like the stubs were 1/8 - 1/4" to long, so I punched out that washer thats inside off the carrier (where if you look thru the diff w/o the shafts, you'd see strait thru it on a CLSD, but not the VLSD) thats there to keep the stubs from going in to deep into the carrier. Seems to be a decent fix for those who don't have the coveted matching axles to the 88 VLSD.....

I don't know if you know this but the hinges are adjustable for and aft. There are, I belive, three bolts each hinge, hidden in a pocket covered by the kick panels....

RB motors king rod and main bearings MB7008AM STD for mains, CR6697AM STD rods *source Nico forums*

king rod and main bearings MB7008AM STD for mains, CR6697AM STD rods *source Nico forums*

HaHa... was it the video.... or what/how he said it? musta hurt someones feelings....

Good to hear you got it up and running again. I timed my visit to my aunts in Mobile on the wrong weekend for a ride in your rbz again.... oh well, maybe next visit. I just about finally got mine ready for its maiden voyage. Been at it hard over the past week. There are so many little things to hook up on this TT set up. I kinda wish I would've gone with a single GT42r or something. I must have 20 - 30 fuel/oil/water lines on this thing. When your using all AN fittings, that adds up quick... Anyway, hope to have it up and running by thanksgiving, then maybe take it for a ride out your way... Can't wait to hear how yours is running, so be sure to update us after you run it.... later - joel .

Yea, that guy does rape you on his prices.... I've seen them for half that cost before, but..... if you need them NOW, what can you do.... .

Here you go.... http://cgi.ebay.com/ebaymotors/RB25DET-Exhaust-Intake-Valve-Seals-RB25DE-RB25-RB_W0QQcmdZViewItemQQcategoryZ33621QQihZ008QQitemZ180002312363QQtcZphoto .

Is it a R32 series, or a R33?

Air/ Vacum leaks are your worst enemy on a car that age....

I can gaurantee they are not 17mm wrench size bolt heads....

I bought mine from a guy on Ebay that allways has them for sale. They are like $9.xx if I remember right. I will try and find his handle for you and update this thread.... ***Edit *** Here they are... http://cgi.ebay.com/ebaymotors/Datsun-240z-260z-280z-Driveshaft-Bolts-Nuts-Washers-NOS_W0QQitemZ220045724919QQihZ012QQcategoryZ46102QQtcZphotoQQrdZ1QQcmdZViewItem

***** Thanks to eh? @ Nico for this info... **** " I'm surprise I didn't know this but Z32 lifters, retainers and valve collets are the same P/N as RB25's..13231-79S00 LIFTER-VALVE 13210-D4200 COLLET-VALVE SPRING 13209-D4200 RETAINER-VALVE SPRING Always visually verify it's the same before you buy though."

There really isn't jack that can be done to those pudd's that renigg on a sell.... The worst thing I think is a non delivery strike you can file against him. Start here then see if there is other links you can find that will help you>> http://pages.ebay.com/help/tp/inr-snad-process.html .

***** RB25DET Rear Transmission Seal ***** OEM Nissan Part # 32136-01G10 Thanks Jamie, it will only help those that thru this whole thread though....

***** RB25DET Rear Transmission Seal ***** OEM Nissan Part # 32136-01G10 Thanks Jamie, it will only help those that thru this whole thread though....

Sorry, but I don't get it..... nobody what??

I watched it again.... those dumba$$ other guys really showed their true colors....

Here we go again......

I can't see that being to big of a issue, long as its not putting the nose mount in to much of a preload bind....

Man, that install looks sweet.... I like the attention to detail!! Great idea on the breather box placement. Better hurry up and enjoy it before you have to put her up for the winter...