Jump to content
HybridZ

Post pics of your z's here!!


terrorizer805

Recommended Posts

post-32762-0-45851500-1442801820_thumb.jpg

 

Above was shot on January 1st 2014, when she broke down and had to be towed home. It barely left the garage after that and it took 18 months of off-and-on work to replace all rust with fresh metal, cage it, strip it to metal, do all the body work, switch to all fiberglass parts except for doors, rewire it, and return it to the original 1972 factory color it came in. First car I've built on this level and I'm hyped to be near the end. Still have some work to do, but I have to go on a work trip for a week so this is where it sits now and I'm too anxious to not post a couple photos it somewhere. 

post-32762-0-44016900-1442801851_thumb.jpg

post-32762-0-67097300-1442801853_thumb.jpg

Link to comment
Share on other sites

  • 4 weeks later...

attachicon.gif 2015-09-20 at 7.09.25 PM.jpg

 

Above was shot on January 1st 2014, when she broke down and had to be towed home. It barely left the garage after that and it took 18 months of off-and-on work to replace all rust with fresh metal, cage it, strip it to metal, do all the body work, switch to all fiberglass parts except for doors, rewire it, and return it to the original 1972 factory color it came in. First car I've built on this level and I'm hyped to be near the end. Still have some work to do, but I have to go on a work trip for a week so this is where it sits now and I'm too anxious to not post a couple photos it somewhere. 

attachicon.gifIMG_2617.JPG

attachicon.gifIMG_2618.JPG

 

dang!! is that rescue green.  thats suck a sick color for a Z.   looks great man. 

Link to comment
Share on other sites

Finally got my Z on the road after months of abusing myself to (mostly) finish the project on schedule.  I couldn't be happier with the results. Now time to begin ordering jets so I can tune my carbs.  

IMG 5438


IMG 5439


IMG 5445


IMG 5433


L28

ITM Flat tops

P90 shaved .080"

Crane Cam #168-0012

Kameari Tensioner

Kameari adj cam gear

Arizona Z cast AL oil pan

Harata Intake

Mikuni 40PHH carbs

MSA 6:1 ceramic coated header

2.5" exhaust 

Gibson round muffler #758216

T3 adj LCAs front and rear (gtx2 front setup)

BC Coilover conversion

Rear Maxima disc conv.

Upgraded alternator

15" Southern Ways 

Link to comment
Share on other sites

more pics:

IMG 4846


IMG 5420


Runs really strong.  Idles well and screams once on the main jets. Its the transition that needs to be fine tuned.  Lots of reading to do here.  I have about 3 hours of driving on it now and it just seems to get better every time I drive it.  handles like a go-kart.  I got the 5K springs front and rear on the BC coilovers and I like the ride with dampeners set all the way soft.

Took a chance on the muffler, Its perfect IMO.  The sounds this thing makes are intoxicating!!!

Edited by Samurai7one
Link to comment
Share on other sites

 

more pics:
 
 
Runs really strong.  Idles well and screams once on the main jets. Its the transition that needs to be fine tuned.  Lots of reading to do here.  I have about 3 hours of driving on it now and it just seems to get better every time I drive it.  handles like a go-kart.  I got the 5K springs front and rear on the BC coilovers and I like the ride with dampeners set all the way soft.
Took a chance on the muffler, Its perfect IMO.  The sounds this thing makes are intoxicating!!!

 

Are you going to the autox in Hammond this weekend?

Link to comment
Share on other sites

  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...